• Journal of the Korean Society for Railway
• /
• v.11 no.2
• /
• pp.195-202
• /
• 2008

The transition area between a bridge and an earthwork is one of the weakest area of track because of the track geometry deterioration caused unequal settlement of backfill of abutment. In case of a ballastless track, the approach slab could be installed to prevent such a phenomenon. But, if there is occurred the inclined displacement on the approach slab by a settlement of the foundation or formation, the track is also under the inclined displacement. And this defect causes reducing the running stability of a vehicle, the riding comfort of passengers, and increasing the track deteriorations by excessive impact force acting on the track. In this study, parametric studies were performed to investigate the displacement limit on the approach slab to avoid such problems. The length and the amount of unequal settlement of approach slab were adopted as parameter for numerical analysis considering vehicle-track interaction. Car body accelerations, variations of wheel force, stresses in rail, and uplift forces induced on fastener clip were investigated. From the result, resonable settlement limit on the end of an approach slab according to slab length was suggested.

• Journal of Korean Physical Therapy Science
• /
• v.15 no.2
• /
• pp.79-86
• /
• 2008

Background: The purpose of this study was to present a practical method of medical treatment to improve the balance and motor ability of the mentally retarded child with a single mentally retarded child-subject. Methods: The subject of the study was a 39-month-old mentally retarded female. This study included a 2-week basic period and a 13-week treatment period. The treatment method was based on the Bobath Approach. Gross motor function measurement (GMFM) was used to examine changes in motor ability, and the Pediatric Balance Scale (PBS) was used to measure changes in balance ability. The curative program was composed of normalization of muscle tone, strengthening of leg endurance and muscular strength, the improvement of trunk alignment, and the increase of balance. Visual rate of change was used to examine the results. Results: As a result of this study, balance ability increased on the Pediatric Balance Scale (PBS) by 24 points, and motor function increased in terms of Gross Motor Function Measurement (GMFM) by 6.9% (18 points). Standing increased by 41% (16 points), and walking, running, and jumping increased by 31.9% (23 points) compared to thebasic period. Therefore, the Bobath Approach appears to be an appropriate method to improve balance and motor ability in mentally retarded children. Conclusion: It is surmised that aggressive intervention by physical therapists and occupational therapists, and a follow-up study, are required for the growth of motor ability in mentally retarded children.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.141-148
• /
• 2000

In system design, it is not always possible that all decision makers can cooperate fully and thus avoid conflict. They each control a specified subset of design variables and seek to minimize their own cost functions subject to their individual constraints. However, a system management team makes every effort to coordinate multiple disciplines and overcome such noncooperative environment. Although full cooperation is difficult to achieve, noncooperation also should be avoided as possible. Our approach is to predict the results of their cooperation and generate approximate Pareto set for their multiple objectives. The Pareto set can be obtained according to the degree of one's conceding coupling variables in the other's favor. We employ approximation concept for modelling this coordination and the mutiobjective genetic algorithm for exploring the coupling variable space for obtaining an approximate Pareto set. The approximation management concept is also used for improving the accuracy of the Pareto set. The exploration for the coupling variable space is more efficient because of its smaller dimension than the design variable space. Also, our approach doesn't force the disciplines to change their own way of running analysis and synthesis tools. Since the decision making process is not sequential, the required time can be reduced comparing to the existing multidisciplinary optimization techniques. This approach is applied to some mathematical examples and structural optimization problems.

• Wind and Structures
• /
• v.9 no.1
• /
• pp.37-58
• /
• 2006

The paper describes a study about effects of upstream hills on design wind loads using two mathematical approaches: Computational Fluid Dynamics (CFD) and Artificial Neural Network (NN for short). For this purpose CFD and NN tools have been developed using an object-oriented approach and C++ programming language. The CFD tool consists of solving the Reynolds time-averaged Navier-Stokes equations and $k-{\varepsilon}$ turbulence model using body-fitted nearly-orthogonal coordinate system. Subsequently, design wind load parameters such as speed-up ratio values have been generated for a wide spectrum of two-dimensional hill geometries that includes isolated and multiple steep and shallow hills. Ground roughness effect has also been considered. Such CFD solutions, however, normally require among other things ample computational time, background knowledge and high-capacity hardware. To assist the enduser, an easier, faster and more inexpensive NN model trained with the CFD-generated data is proposed in this paper. Prior to using the CFD data for training purposes, extensive validation work has been carried out by comparing with boundary layer wind tunnel (BLWT) data. The CFD trained NN (CFD-NN) has produced speed-up ratio values for cases such as multiple hills that are not covered by wind design standards such as the Commentaries of the National Building Code of Canada (1995). The CFD-NN results compare well with BLWT data available in literature and the proposed approach requires fewer resources compared to running BLWT experiments.

• Asia-Pacific Journal of Business
• /
• v.14 no.1
• /
• pp.41-57
• /
• 2023

Purpose - The purpose of this study is to research how the different types of experiences affect consumer's recognition in terms of luxury vintage fashion products, and what kinds of value consumer can achieve. Design/methodology/approach - The study is based on the means-end chain (MEC) approach for an in-depth understanding of consumers' recognition systems through conducting the laddering interview technique. Above all, the research conducted a pilot test to gain attributes of consumer experiences about luxury vintage fashion products from Korean and Taiwanese. Findings - It is found that not only by actual purchase, experience without purchasing also can lead to consumers' self-fulfilment and self-accomplishment, which filled the lack of relevant literature in the luxury vintage industry. In addition, the study sorted out the channels that consumers approach LVF products, which provide a classification reference for future research related to the luxury vintage consumer. Research implications or originality - As consumers can gain a lot kind of value through LVF products, luxury brands can attract consumers by using vintage as a market strategy. For luxury marketers, by running LVF shopping mall online or opening LVF stores, not only allow consumers' attach with LVF products but also can further lead to the purchase behaviors. In addition, consumers who are interested in LVF are those who are aware of the authenticity, uniqueness, and rarity of the brand. Due the fact, these consumers may be interested in the topic of sustainability.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.245-252
• /
• 2007

FTA (fault tree analysis), an analytical method for system failure management, was employed in the management of faults in running PCR analysis. PCR is executed through several processes, in which the process of PCR machine operation was selected for the analysis by FTA. The reason for choosing the simplest process in the PCR analysis was to adopt it as a first trial to test a feasibility of the FTA approach. First, fault events-top event, intermediate event, basic events-were identified by survey on expert knowledge of PCR. Then those events were correlated deductively to build a fault tree in hierarchical structure. The fault tree was evaluated qualitatively and quantitatively, yielding minimal cut sets, structural importance, common cause vulnerability, simulation of probability of occurrence of top event, cut set importance, item importance and sensitivity. The top event was 'errors in the step of PCR machine operation in running PCR analysis'. The major intermediate events were 'failures in instrument' and 'errors in actions in experiment'. The basic events were four events, one event and one event based on human errors, instrument failure and energy source failure, respectively. Those events were combined with Boolean logic gates-AND or OR, constructing a fault tree. In the qualitative evaluation of the tree, the basic events-'errors in preparing the reaction mixture', 'errors in setting temperature and time of PCR machine', 'failure of electrical power during running PCR machine', 'errors in selecting adequate PCR machine'-proved the most critical in the occurrence of the fault of the top event. In the quantitative evaluation, the list of the critical events were not the same as that from the qualitative evaluation. It was because the probability value of PCR machine failure, not on the list above though, increased with used time, and the probability of the events of electricity failure and defective of PCR machine were given zero due to rare likelihood of the events in general. It was concluded that this feasibility study is worth being a means to introduce the novel technique, FTA, to the management of faults in running PCR analysis.

• The Journal of Korean society of community based occupational therapy
• /
• v.1 no.2
• /
• pp.71-79
• /
• 2011

Objective : This study aimed to systematically reviewed to identify, evaluate, synthesize the research literature and suggested to the research direction on the effectiveness of occupational therapy using a sensory integration approach. Methods : We analyzed 10 studies that identified the effectiveness of occupational therapy using a sensory integration approach for children and adolescents offering in MEDLINE/PubMed and http://ajot.aotapress.net between 1993 and 2011. Results : The subjects were the sensory modulation disorder and autism spectrum. The different intervention strategies were similar to a previous studies. Intervention dosage was over 20 sessions, 2~3days per week more than 10weeks. Occupational therapy using a sensory integration approach may result in positive outcome in motor performance, behavioral outcomes, academic and psychoeducational outcomes and tried to currently identify the effect of intervention outcomes in sensory processing and occupational performance using the GAS. Conclusion : Clinicians have a minimal idea planing a research design and a evidence running a study.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.3
• /
• pp.187-195
• /
• 2017

The operation planning of transports used to move blocks is the one of key factors. Furthermore, reducing the running time through the effective plan contributes to pulling forward the whole logistic process of the shipyard and substantially saving the fuel consumption of itself as well. The past researches of the transporter focused on finding only the shortest distances, so called, Manhattan distance. However, these searching approaches cannot help having the significant difference in the real operational time and distance with the minimum cost approach which considers the speed retardation for turns or safety at the intersection. This study suggests the noble transporter's operational model which could take account of the consuming operational time around the crossroads on the shipyard. Concretely, the proposed method guarantees the minimization of transporters' turns and passage number which are huge burdensome to the operation time and the whole planning of transports with the given period. Resultantly, this paper is willing to explain the appropriateness of our approach, compared with the previous ones.

• Information Systems Review
• /
• v.8 no.1
• /
• pp.43-61
• /
• 2006

Evaluating ubiquitous computing services is important for the commercialization of the ubiquitous services which will be running on electronic markets. However, despite its importance and usefulness, assessing ubiquitous computing services is still in its early stage. Moreover, sufficient study of making a distinction what are 'ubiquitous computing services' or not has not been provided yet. Hence, this paper aims to propose an integrated methodology to assess the ubiquitous computing services. A multilayered approach is considered to assess not only technical but also behavioral perspectives. To show the feasibility of the assessment model, three use cases are studied and evaluated.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.5
• /
• pp.639-646
• /
• 2005

In this research, we tried to develop the application method to water management and treatment using toxicity test method. When we measure the toxicity of environmental samples, we have to decide whether we take some countermeasures to reduce the toxicity or not. The first issue is how to set these action levels in each bioassays. A new idea was attempted to authorize indirect approach of each bioassays through the response characteristics against mixture of chemicals in water quality standard. The significant response in the cell-growth-inhibition bioassay was detected for standards-mixture(STDs). For acute toxicity assay, STDs-based implicit correlation between risks to humans and bioassay data showed a rational approach to set action levels in practical management. A simple model was proposed to describe and predict the changes in the total toxicity based on the concentrations of toxic-controlling chemicals during the ozonation of landfill leachates. On the basis of this simple model, toxicity reduction was predicted for pre-aggregation treatment before ozonation and ozone concentration during the ozonation. The method proposed in this study would be useful in optimizing water treatment processes and their running conditions in terms of the toxicity reduction efficacy.