• 대한의용생체공학회:의공학회지
• /
• 제31권1호
• /
• pp.33-39
• /
• 2010

During running, the human body experiences repeated impact force between the foot and the ground. The impact force is highly associated with injury of the lower extremity, comfort and running performance. Therefore, shoemakers have developed shoes with various midsole properties to prevent the injury of lower extremity, improve the comfort and enhance the running performance. The purpose of this study is to investigate influence of midsole hardness on shock absorption along the human body during running. Thirty two expert runners consented to participate in the study and ran at a constant speed with three different pairs of shoes with soft, medium and hard midsole respectively. Using accelerometers we measured the shock absorption from shoe heel to cervical vertebral column. In conclusion, at the shoe heel, shock was the greatest with the hard midsole. However because most shock was absorbed between shoe heel and the knee, notable influence of midsole was not detected upper knee. At shoe heel, regardless of midsole hardness, the shock of younger female was the greatest. The authors expect to apply this result for providing a guideline for utilizing proper midsole hardness for manufacturing age and gender-specific shoe.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.559-564
• /
• 2011

For the safety of railway, it should be evaluated for the running safety by measuring the derailment coefficient. Although railway has run the fixed and maintained rail, some of railway is derailed. This report shows the results that performed the static load test, main line running test on the basis of the derailment theory and experience. It is executed main line test into more than 90km/h for estimating the curving performance and running safety of depressed center flat car of 3-axle bogie. As the test results, could confirm the curving performance and running safety of depressed center fiat car of 3-axle bogie from the results of the wheel unloading, lateral force, derailment coefficient etc. Derailment coefficient was less than 0.6, and lateral force allowance limit and wheel load reduction ratio were enough safe.

• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.290-298
• /
• 2014

Purpose: To ascertain the increase of the farm income that predominantly relies on human resources by mechanizing Welsh onion harvesting, a tractor-mounted Welsh onion harvester was developed in this study. Method: An experiment for evaluating harvesting performance was performed for the developed Welsh onion harvester in an actual Welsh onion farm. The harvest performance was evaluated at the tractor running speeds of 5.0 cm/s, 11.4 cm/s and 15.8 cm/s, by comparing the operating efficiency, harvest rate, and damage rate of the Welsh onion harvester. Results: The performance of the harvester was rated as very good, with a 100% harvest rate, regardless of tractor running speed. Furthermore, it is shown that work efficiency of the harvester is expected to increase as the running speed increases. Nonetheless, the damage rate of the harvested Welsh onions at running speeds 5.0 cm/s, 11.4 cm/s, and 15.8 cm/s, increased correspondingly and proportionally to speeds from 4.55% to 6.53% and to 11.29%. The residual amount of soil on the harvested Welsh onions was about 0.24% of their weight showing excellent soil-removal performance of the harvester. Conclusion: The developed Welsh onion harvester is believed to improve the labor productivity and cultivation environment of Welsh onion farmhouses by the mechanization of the harvesting process that is currently associated with the largest amount of labor hours.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.119-128
• /
• 2006

This study was performed to see ground reaction force with different soccer studs with twelve players in Human Performance Laboratory(University of Calgary). Running speed was $4.0{\pm}0.2m/sec$ in straight running as well as vcut running. By using four different kinds of shoes; three different pairs of soccer shoes and one pair of jogging shoes, I reached a conclusion as following. In case of right and left ground reaction force, on the assumption that the positive magnitude of power is inversion and the negative is eversion, vcut running did not occur any inversion, which in the aspect of kinetic mechanics, thought to be decelerating movement. Because when eversion happens, it arises component force of power on heading direction about 8.6 times more than in the movement of straight running. In case of front and rear ground reaction, on the assumption that the positive magnitude of power is suspension power and the negative is propulsion, vcut movement is thought to be decelerating movement in the aspect of kinetic mechanics. Because on heading direction, this movement occurs component force of power about 1.8 times more suspension and 2.2 more propulsion than in the straight running movement. In case of vertical ground reaction, on the assumption that the first peak is the magnitude of power in impact and the second peak is the magnitude of power in active, we judged that the straight running movement performed more efficiently than the vcut movement in the aspect of kinetic mechanics. On the next study, I suppose that vcut running would make up an interesting subject in the aspect of improving kinetic performance ability.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1816-1822
• /
• 2010

In this research TPS (Train Performance Simulation) blocks are designed using Simulink and applied to generate speed profiles for energy-efficient train operation. With a train operation mode of maximum powering, coasting, and maximum breaking, a breaking point is calculated from forward-backward running profiles. Then, GA (Genetic Algorithm) is used to solve a running time constraint, and a coasting point is produced from the searching process of GA. With the breaking point and the coasting point a speed profile is plotted. Train performance under a speed limit and gradient variations is simulated and resultant speed profiles are analyzed.

• Journal of Computing Science and Engineering
• /
• 제5권4호
• /
• pp.283-287
• /
• 2011

Due to the proliferation of software parallelization on multi-core CPUs, the number of concurrently executing processes is rapidly increasing. Unlike processes running in a server environment, those executing in a multi-core desktop or a multi-core mobile platform have various correlations. Therefore, it is crucial to consider correlations among concurrently running processes. In this paper, we exploit the property that for a given created location in the binary image of the parent process, the average running time of child processes residing in the run-queue differs. We claim that this property can be exploited to improve the overall system performance by running processes that have a relatively short running time before those with a longer running time. Experimental results verified that the running time was actually improved by 11%.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.127-131
• /
• 2005

The running test for the Korean High Speed Train(HSR-350x) was performed at operating maximum sped(350km/h) at December 16th, 2004. HSR-350x had been fabricated in June, 2002 and the on-line test for the performance fo HSR-350x was started with 60km/h at August 19th, 2002. The success of running test at 350km/h is recorded the 4th rank in the world. In this paper, the measured results of the major performance(running behaviour, current collection, stability of rail and bridge) characteristics for HSR-350x are reviewed. All measured values are within the criteria.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1282-1288
• /
• 2006

Upon demands for the requests of rapid, safe and comfort transit, the proven high speed bogie having not only high-quality but also good running performance is required by customer all over the railway vehicle for narrow gauge. Hereupon, the running test on roller testing rig for developed semi-high speed bogie for narrow gauge was carried out in order to verify the running performance and safety. The aim of the test is to assess the dynamic behaviour of the bogie on straight track including the running stability, ride quality, modal frequency and dynamic response.

• 대한조선학회논문집
• /
• 제60권4호
• /
• pp.256-265
• /
• 2023

This paper describes the results of the development of the submarine Free Running Model (FRM). First, the goal of development was set based on the test conditions and the test environment, and the system was obtained accordingly. The target submarine, Joubert BB2 submarine, was selected with a scale of 18.35 in accordance with the development goal. In order to conduct a submarine FRM test underwater, where communication is impossible, the FRM must operate at least semi-autonomously. For this purpose, an Extended Kalman Filter (EKF) based underwater integrated navigation system and control system using a sailplane and an X-shaped sternplane were designed respectively. In addition, a ballast system was designed to enable the model to float to the water surface in case of an emergency. To verify its propulsion, navigation, and control performance, the FRM tests were conducted in both indoor and outdoor basins. As a result, the relationship between propeller RPM and vehicle speed was derived, and it was confirmed that the navigation and control performance met the target value.

• Tribology and Lubricants
• /
• 제15권3호
• /
• pp.257-264
• /
• 1999

Recently as electronics and semi-conductor industry develop, ultra-precision machine tools that use air-spindle with externally pressurized air bearing appear in need of ultra-precision products which demand high precision property. Effects of air compressibility absorbs the vibration of shaft, this is called averaging effect, however, the higher running accuracy is demanded by degrees, the more important factor is machining errors that affect running accuracy of shaft. Actually, it would be very important in the view points of running accuracy to understand effects of machining errors on the running accuracy of the spindle system quantitatively to design and manufacture precision spindle system in the aspect that efficiency in manufacturing spindle system and performance in operation. So fu, there are some researches on the effects that machining error affect running accuracy. However, because these researches deal with one bearing of spindle system, these results aren't enough to explain how much machining errors affect running accuracy in the typical spindle system overall. In this study, we investigate the effects of the perpendicularity error of bearing and shaft on running accuracy of spindle system that consists of journal and thrust bearing theoretically, and suggest design guideline about shape tolerances.