• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.25 no.4
• /
• pp.86-90
• /
• 1980

To define the effect of planting time on the flowering of the peanut varieties, Cheonyup banlip and 9 other varieties were planted seven times at 15 day interval from April 15. The days to flowering of all peanut varieties were shortened proportionately with delayed planting time. The significant negative correlation (r =-0.86**) was recognized between the shortening rate of the days to flowering by later planting time and the days to flowering of peanuts planted at standard seeding time. The short day treatment did not have any effect on the chance of the days to flowering of each variety. A significant negative correlation was recognized between the number of flowers and the days to flowering of the peanut varieties planted at standard seeding time.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.1
• /
• pp.179-190
• /
• 2011

The swirling flow developing in Francis turbine draft tube under part load operation leads to pressure fluctuations usually in the range of 0.2 to 0.4 times the runner rotational frequency resulting from the so-called vortex breakdown. For low cavitation number, the flow features a cavitation vortex rope animated with precession motion. Under given conditions, these pressure fluctuations may lead to undesirable pressure fluctuations in the entire hydraulic system and also produce active power oscillations. For the upper part load range, between 0.7 and 0.85 times the best efficiency discharge, pressure fluctuations may appear in a higher frequency range of 2 to 4 times the runner rotational speed and feature modulations with vortex rope precession. It has been pointed out that for this particular operating point, the vortex rope features elliptical cross section and is animated of a self-rotation. This paper presents an experimental investigation focusing on this peculiar phenomenon, defined as the upper part load vortex rope. The experimental investigation is carried out on a high specific speed Francis turbine scale model installed on a test rig of the EPFL Laboratory for Hydraulic Machines. The selected operating point corresponds to a discharge of 0.83 times the best efficiency discharge. Observations of the cavitation vortex carried out with high speed camera have been recorded and synchronized with pressure fluctuations measurements at the draft tube cone. First, the vortex rope self rotation frequency is evidenced and the related frequency is deduced. Then, the influence of the sigma cavitation number on vortex rope shape and pressure fluctuations is presented. The waterfall diagram of the pressure fluctuations evidences resonance effects with the hydraulic circuit. The influence of outlet bubble cavitation and air injection is also investigated for low cavitation number. The time evolution of the vortex rope volume is compared with pressure fluctuations time evolution using image processing. Finally, the influence of the Froude number on the vortex rope shape and the associated pressure fluctuations is analyzed by varying the rotational speed.

• Tribology and Lubricants
• /
• v.37 no.4
• /
• pp.117-124
• /
• 2021

In this study, we perform a 3D CFD conjugate analysis according to the shape of the foil ramp of the air foil thrust bearing, analyze the flow characteristics inside the bearing, and compare the results corresponding to the two shapes. Air has a lower viscosity than lubricating oil. Therefore, the thrust runner of the bearing must rotate at high speed to support the load. The gap between thrust runner and foil is significantly smaller than that of the oil bearing. Hence, it is crucial to analyze the complex flow characteristics inside the bearing to predict the complex flow inside the bearing and performance of the bearing. In addition, flow characteristics may appear differently depending on the ramp shape of the bearing foil, which may affect bearing performance. In this study, we numerically analyze the main flow path of air flowing into the bearing and the secondary flow path used for cooling the bearing using the commercial CFD software ANSYS CFX and compare the flow characteristics for straight and curved foil ramp shapes. Notably, there is a difference in the speed of the flowing air according to the shape of the ramp, which affects the bearing performance.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.3
• /
• pp.173-183
• /
• 2019

Objective: The aim of this study was to investigate the correlation coefficients between anthropometric parameters of the foot and kinetic variables during running. Method: This study was conducted on 21 healthy young adults (age: $24.8{\pm}2.1yes$, height: $177.2{\pm}5.8cm$, body mass: $73.3{\pm}7.3kg$, foot length: $256.5{\pm}12.3mm$) with normal foot type and heel strike running. To measure the anthropometric parameters, radiographs were taken on the frontal and sagittal planes, and determined the length and width of each segment and the navicular height. Barefoot running was performed at a preferred velocity ($3.0{\pm}0.2m/s$) and a fixed velocity (4.0 m/s) on treadmill (Bertec, USA) in order to measure the kinetic variables. The vertical impact peak force, the vertical active peak force, the braking peak force, the propulsion peak force, the vertical force at mid-stance (vertical ground reaction when the foot is fully landed in mid-stance or at the point where the weight was uniformly distributed on the foot) and the impact loading rate were calculated. Pearson's correlation coefficient was used to investigate the relationship between anthropometric variables and kinetical variables. The significance level was set to ${\alpha}=.05$. Results: At the preferred velocity running, the runner with longer forefoot had lower active force (r=-.448, p=.041) than the runner with short forefoot. At the fixed velocity, as the navicular height increases, the vertical force at full landing moment increases (r= .671, p= .001) and as the rearfoot length increases, the impact loading rate decreases (r=- .469, p= .032). Conclusion: There was a statistically significant difference in the length of fore-foot and rearfoot, and navicular height. Therefore it was conclude that anthropometric properties need to be considered in the foot study. It was expected that the relationship between anthropometric parameters and kinetical variables of foot during running can be used as scientific criteria and data in various fields including performance, injury and equipment development.

• Journal of People, Plants, and Environment
• /
• v.23 no.6
• /
• pp.615-624
• /
• 2020

Background and objective: Urbanization caused a reduction in urban green space and a lack of community spaces. An attempt to solve these problems, urban gardens, have become popular and are currently being implemented in various downtown areas. However, urban gardens have some inadequate aspects from a visual or landscape perspective. The goal of this study was to examine the possibility of an aesthetic and productive garden space by introducing cultivation methods through the planting system design process. Methods: The design process using plants was classified and presented to suggest the importance of the landscape and aesthetic value. An urban garden space was designed according to the perspective of 'production scenery' and 'participation aesthetics'. According to the characteristics of the plant, urban gardens were divided into vertical type (corn, millet, sorghum), climbing type (kidney bean, cucumber, bitter gourd), and runner type (melon, watermelon, peanut). After classifying plants according to the shape of the root, the structure supporting climbing was installed and the crops were cultivated in an upright form with a tunnel. Results: In the designed cultivation, each crop cooperates, without invading each other's space. Compared with the conventional cultivation, there was little difference in production, and management was made more convenient since weed outbreaks were effectively suppressed while runner type crops cover over the land's surface. Since the positions of each crop are clearly distinguished, the aesthetic value is improved by offering a sense of rhythm with a balanced design. Conclusion: The results suggest that the cultivation methods through the plant system design process have aesthetic as well as productive value, and the design using plants, an infinite living resource, could lead to an expansion of the design field. Moreover, it would enable a sustainable symbiosis between industry and environment. There is potential for the design industry to make significant progress through collaboration with agriculture, horticulture, and landscape architecture.

• Tribology and Lubricants
• /
• v.40 no.5
• /
• pp.151-156
• /
• 2024

Gas foil thrust bearings (GFTBs) support axial loads in oil-free, high speed rotating machinery using gas as a lubricant. However, under low-speed and high-load conditions, such a bearing experiences friction, leading to wear and a reduced lifespan. Therefore, a pressurized GFTB (PGFTB) that combines hydrostatic and hydrodynamic lubrication by supplying pressurized gas through the supply hole of the top foil has been developed, and various studies have been conducted. In this study, we develop mathematical models of PGFTBs with sloped and stepped recesses and predict its load support performance. The PGFTB maintains a minimum film thickness of approximately 20 ㎛ at rest (0 rpm), regardless of the type of recess, indicating a sufficient hydrostatic pressure to lift the runner at a low rotor speed. Furthermore, the minimum film thickness increases slightly as the numbers of feed holes in the in- and outward radial directions relative to the centerline of the PGFTB pad increase. These findings highlight the importance of supply hole placement in enhancing load support performance. As the rotor speed increases, the minimum film thickness increases rapidly, regardless of the number of supply holes, and without pressurization, sufficient hydrodynamic pressure is generated to lift the runner upon exceeding a certain rotor speed. When comparing the sloped and stepped recesses, the PGFTB with the sloped groove exhibits a superior overall load support performance.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.407-414
• /
• 2018

This study was aimed to evaluate the effect of application method and concentration of gibberellin $A_3$ ($GA_3$) on the growth, runner production, and seedling quality of strawberry plants (Fragaria ${\times}$ ananassa Duch. cv. Maehyang) during nursery period. The mother plants of strawberry were transplanted in pot ($64{\times}27{\times}18cm$) filled with commercial growing medium on March 20, 2018. $GA_3$ concentration was applied as 0, 50, 100 or $200mg{\cdot}L^{-1}$ with spray or drench to 45 mL per plant at 4 weeks after transplanting, respectively. Nutrient solution was supplied with the EC $1.5dS{\cdot}m^{-1}$ after the transplanting and supplied 350 mL per pot twice a day (15 min per one time) after rooting. The growth characteristics of mother plants of strawberry were measured at 7 weeks after treatment, and growth characteristics of daughter plants of strawberry were measured at 10 weeks after treatment. Runner length and diameter of mother plant was the longest or thickest in the spray with $200mg{\cdot}L^{-1}$ than the other treatments, respectively. Soil-plant analysis development (SPAD) value of mother plant was the lowest in spray with $200mg{\cdot}L^{-1}$. However, leaf length, leaf width, and crown diameter showed no significant differences in all treatment among application method and concentration of $GA_3$. As the concentration of $GA_3$ increased, physiological disorder like stretchiness of crown occurred more. The physiological disorder was the most occurred in spray treatment with $200mg{\cdot}L^{-1}$, but drench treatment occurred less than spray treatment. The number of runners and daughter plants increased with increasing concentration of $GA_3$ regardless of application methods. In the growth characteristics of the daughter plants, leaf length and leaf width of first daughter plant, plant height, crown diameter, leaf area and SPAD value of second daughter plant, and plant height of third daughter plant were the significantly greatest in drench with $100mg{\cdot}L^{-1}$ treatment. This results indicate that growth and runner production of mother plants and growth of daughter plants of strawberry were the best achieved by drench application in the $100mg{\cdot}L^{-1}$ $GA_3$.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.178-184
• /
• 2019

Strawberry ($Fragaria{\times}ananassa$) is one of the most important and popular fruit crops in the world, and 'Sulhyang' is one of the principal cultivars cultivated in the Republic of Korea for the domestic market. The growth and flower induction in strawberry is the process which influences directly on fruit bearing and yield of this crop. In this study, effect of benzyladenine (BA), gibberellic acid ($GA_3$), and salicylic acid (SA) on growth and flower bud induction in strawberry 'Sulhyang' was investigated. The 3-week-old runner plants, grown in 21-cell propagation trays, were potted and cultivated in growth chambers with $25^{\circ}C/15^{\circ}C$ (day/night) temperatures, 70% relative humidity (RH), and light intensity of $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ photosynthetic photon flux density (PPFD) provided by white light emitting diodes (LEDs). The runner plants were treated with one of three concentrations, 0 (control), 100, and $200mg{\cdot}L^{-1}$ of BA, $GA_3$, or SA solution. The chemicals were sprayed two times on leaves of runner plants at an interval of two weeks. After 9 weeks the results showed that the application of all chemicals caused reduction of root length and chlorophyll (SPAD) content as compared to the control. The lowest chlorophyll (SPAD) content was recorded in plants treated with $GA_3$. However, the treatment of $200mg{\cdot}L^{-1}$ $GA_3$ promoted leaf area, leaf fresh weight, and plant fresh weight. The greatest flower induction (85%) and number of inflorescences (4.3 inflorescences per plant) were observed in the treatment of $200mg{\cdot}L^{-1}\;SA$, followed by $100mg{\cdot}L^{-1}\;SA$. Overall, results suggest that foliar application of $GA_3$ solution could accelerate plant growth, while foliar application of SA solution could induce hastened flowering. Further studies may be needed to find out the relationship between $GA_3$ and SA solutions treated in a combination, and the molecular mechanism involved in those responses observed.

• International Journal of Costume and Fashion
• /
• v.6 no.1
• /
• pp.56-70
• /
• 2006

The purpose of this study was to develop the high-value-added fashion cultural products with Korean image for the enhancement of global competitiveness. For this purpose, theoretical examination of the unique beauty of Korea and Korean image was first performed. Especially, characteristics of Korean traditional botanic patterns were investigated with LOHAS(Lifestyles of Health and Sustainability) philosophy which is the focus of the current design trend. Along with the above, the environmentally-friendly digital textile printing technology and Korean traditional botanic patterns were used to produce creative and globally-competitive fashion cultural products. Finally, a series of fashion cultural products were developed such as table runner, table mat and bedclothes.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.628-632
• /
• 2002

Low voltage circuit breakers which interrupt rapidly and raise the reliability of power supply are widly used in power distribution systems. In the paper, it was investigated how much Interrupting capability was improved by correcting the shape of the contact system in molded case circuit breaker(below MCCB), especially arc runner. Prior to the interrupting testing, it was necessary for the optimum design to analyze electromagnetic forces on the contact system, generated by current and flux density. This paper presents both our compuational analysis and test results on contact system in MCCB