• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.192.1-192.1
• /
• 2010

Micro hydraulic turbines take a growing interest because of its small and simple structure as well as high possibility of applying to micro and small hydropower resources. The differential pressure exiting within the city water pipelines can be used efficiently to generate electricity like the energy generated through gravitational potential energy in dams. In order to reduce water pressure at the inlet of water cleaning centers, pressure reducing valves are used widely. Therefore, pressure energy is wasted. Instead of using the pressure reduction valve, a micro counter-rotating hydraulic turbine can be replaced to get energy caused by the large differential pressure found in the city water pipelines. In this paper, detail studies have been carried out to acquire basic design data of micro counter-rotating hydraulic turbine, output power, head, and efficiency characteristics on various number of runner vane. Moreover, the influences of pressure, tangential and axial velocity distributions on turbine performance are also investigated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.3
• /
• pp.541-544
• /
• 1992

Duck eggs from Indigenous (desi), Khaki Campbell and Crossbred (Indian Runner $\times$ Khaki Campbell, $F_1$) were incubated to investigate fertility, hatchability and other related traits. The fertility was highest in crossbred followed by Khaki Campbell and Indigenous ducks respectively. The embryonic mortality was highest in Khaki Campbell followed by Indigenous and crossbred respectively. The embryonic mortality was higher in eggs of 7 days pre-incubation holding period and lower in eggs of 3 days pre-incubation holding period. A significant positive correlation was found between temperature and embryonic mortality as well as relative humidity and embryonic mortality. The hatchability on fertile eggs was highest in crossbred ducks and almost similar in both Khaki Campbell and Indigenous ducks. The hatchability was higher in eggs stored for 3 days in comparison with that of 7 days pre-incubation holding period. A negative correlation was found between temperature and hatchability as well as humidity and hatchability. The normal ducklings hatched out from the eggs of Khaki Campbell ducks was highest followed by Indigenous and crossbred respectively. There was a negative correlation between temperature and normal ducklings hatched as well as relative humidity and normal ducklings hatched. The preincubation holding temperature and relative humidity had positive correlation with dead-in-shell.

• Mycobiology
• /
• v.29 no.2
• /
• pp.110-112
• /
• 2001

A black scab was observed on strawberry(Fragaria ananassa) in plastic film houses around Jinju area during the winter of 2000. The disease started from leaves then moved to calyx and runner. At the beginning, the infected area started with small dark brown spots then gradually expanded. The pathogenic fungus was purely isolated from the diseased leaves, calyx and runner. The fungus was inoculated to test Koch's postulates and proved to be the causal agent of the disease. The isolated fungus grew readily on potato dextrose agar, forming dark green to dark gray colonies. The optimum temperature for mycelial growth was about $25^{\circ}C$. The diameter of growing hyphae was $3.8{\sim}5.6{\mu}m$. Conidia were ellipsoidal, ovoid or subspherical, mostly one-celled but occasionally septate. The size of conidia were $4.1{\sim}11.7{\times}3.8{\sim}5.3$ 1-cell, $9.3{\sim}18.8{\times}4.0{\sim}7.4{\mu}m$ 2-cell and formed in long branched chains on the erected conidiophores which were dark brown and variable in length between $28.8{\sim}236.2{\times}3.0{\sim}6.2{\mu}m$ in size. The fungus was identified as Cladosporium herbarum on the basis of its morphological characteristics. The black scab disease of strawberry caused by C. herbarum has not been reported in Korea previously.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.394-394
• /
• 2009

Owing to the increasing number of intelligent homes(or called Smart home), the corresponding cost is much higher. Low voltage circuit breakers are widely used in the intelligent homes to interrupt fault current rapidly and to assure the reliability of the power supply. The distribution of magnetic field induced by arc current in the contact system of molded case circuit breaker(hereafter MCCB) depends on the shape, arrangement, and kinds of material of arc runner. This paper is focused on understanding the interrupting capability, more specifically of the arc runner, based on the shape of the contact system in the current MCCB. The magnetic driving force was calculated by using the flux densities induced by the arc current, which are obtained by three-dimensional finite element method. There is a need to assure that the optimum design required to analyze the electromagnetic forces of the contact system generated by current and the flux density be present. This is paper present our computational analysis on contact system in MCCB.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.1
• /
• pp.17-23
• /
• 2013

Recently so much attention has been focused on renewable energy and, since its sources to exploit are already almost saturated in the country, the practical alternative to this situation could be a micro-turbine which uses the low head and low flow. From a point of view of local micro-turbine design capacity and manufacturing technology, the problems such as the accumulation of technical skills, the expansion of related industries, the national policy expansion and the turbine efficiency to improve are still vulnerable and it's true that there are also negative views about the economic feasibility, the technicity and the operation management of the micro-turbine. However, if the improvement can be done in technology of low-head double regulation micro-turbine to generate more outputs and the operation management can be reliably realized, the micro-turbine will be re-evaluated as an appliable source of renewable energy, even the output is small, and by a paradigm shift, it could realize a power generation as an economic and rational system.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.8
• /
• pp.116-125
• /
• 2002

Semi-Solid Diecasters usually carry out the Semi-Solid diecasting experiments before producing new casts. At the Semi-Solid diecasting stages, the runner-gate part has been always repeatedly corrected, which leads to a tedious processing time and increased processing cost. A large amount of experience is essential in manual assessment and if the design is defective, much time and a great deal of efforts will be wasted in the modification of the die. In this study, design system has been developed based on design database. In addition, gate experiment for gating system design has been carried out to append the database. It is possible for engineers to make efficient gating system design of Semi-Solid diecasting and it will result in the reduction of expenses and time to be required. The detailed contents of the research are described in the followings.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.824-827
• /
• 2010

본 논문은 전동형 모터의 Rotor의 자동 성형을 위한 자동화된 주조기 개발에 대한 결과이다. 개발된 자동화된 Rotor 전용 주조기는 수평형에 비해 금형의 크기가 약 1/2정도 이므로 금형 체결력이 반감되고, 기계 구조는 매우 작아진다. 그리고 Al용탕이 사출되는 과정에서 Spool -> Runner -> Gate -> Cavity(제품)에 이르기까지의 Runner를 최소화하여 재용융을 위한 에너지의 비용 절감을 할 수가 있다. 금형 구조가 간단하므로 금형비가 저렴하여 다품종 소량생산에 매우 유리하다. 개발제품은 수직형 구조로 알루미늄 용탕의 윗면의 공기가 금형의 유로 상측에 위치하므로 공기(gas)가 먼저 배출되어 사출(주조)후 Rotor 성형부에 남아 있는 기포가 최소화된다. 그러므로 충진도가 높아진다. Rotor 코아(규소강)가 크더라도 수직형은 금형내에 삽입(Inset)하기가 쉽고 또한, 제품의 착탈 부위와 사출부위가 다르기 때문에 작업성, 안전성이 우수하고 생산성이 매우 높다. 수직형은 충진 밀도가 매우 높고 밀도가 균일하기 때문 Rotor의 회전 소음, 진동에 대한 품질이 매우 우수하다. 따라서 고효율, 고품질의 전동모터 Rotor 제품 생산에 매우 효과적인 장비라 할 수 있다.

• The Korean Journal of Food And Nutrition
• /
• v.3 no.1
• /
• pp.39-56
• /
• 1990

The effects of six kinds of phosphate complex on the water holding capacity (W.H.C) and protein solubility of hair tail, yellow tail runner and dried pollack meat paste were investigated and animal meat(pork, chicken and hare meat complex) The formulation of six kind of phosphate complex employed to this experiment were made by mixing several phosphate such as sodium polyphosphate, sodium pyrophosphate, sodium acid pyrophosphate, potassim pyrophosphate, sodium ultra-meta-phosphate, sodium-tetra-phosphate and monoglyceride at different mixture ratio Among the six kinds of phosphate complex, phosphate B complex which was formulated by mixing sodium polyphosphate 40%, sodium pyrophosphate 30%, sodium tetra mata phosphate 10%, sodium ultra meta phosphate 10% was most effective on enchanging the W H. C, and protein solubility of hair tail, yellow tail runner dried pollack meat past and in case of pork, chicken and hare meat paste. Phosphate C complex which was formulated by mixing sodium polyphosphate 50%. sodium pyrophosphate 30%, sodium tetra meta phosphate 10%, potassium pyrophosphate 10%, was more effective them other phosphate complex, and thief optimum addition level was 0.5% respectively in weight of fish meat paste. Texture characteristics such as hardness, cohesiveness and springiness value of Kamaboko(fish meat and pork, chicken, hare meat complex past meat product) were evaluted as best when 0.5% of Phosphate B complex was added The optimum cooking condition of Kamaboko to get good texture was heating for 20 minutes at 12$0^{\circ}C$.

• International Journal of Fluid Machinery and Systems
• /
• v.7 no.4
• /
• pp.174-182
• /
• 2014

The ultimate objective of this study is to develop a water turbine appropriate for low-head open channels to effectively utilize the unused hydropower energy of rivers and agricultural waterways. The application of a cross-flow runner to open channels as an undershot water turbine has been considered and, to this end, a significant simplification was attained by removing the turbine casing. However, the flow field of an undershot cross-flow water turbine possesses free surfaces, and, as a result, the water depth around the runner changes with variation in the rotational speed such that the flow field itself is significantly altered. Thus, clear understanding of the flow fields observed with free surfaces to improve the performance of this turbine is necessary. In this study, the performance of this turbine and the flow field were evaluated through experiments and numerical analysis. The particle image velocimetry technique was used for flow measurements. The experimental results reflecting the performance of this turbine and the flow field were consistent with numerical analysis. In addition, the flow fields at the inlet and outlet regions at the first and second stages of this water turbine were clarified.

• Journal of Environmental Science International
• /
• v.25 no.3
• /
• pp.337-343
• /
• 2016

The present study aimed to determine the influence of various root restriction media on seedling quality and early growth of strawberry after transplanting. The root activity of the seedlings, measured 20 days after fixation, was considerably higher (0.096, 0.090, and $0.063mg{\cdot}g^{-1}{\cdot}h^{-1}$ at 420, 450, and 480 nm, respectively) in expanded rice hull (ERH) treatment than in the sandy loam and loamy sand treatments. The volumetric water content (VWC) of the root media tested across 3 irrigation regimes (15 d, 30 d, 45 d) in the nursery field was highest in sandy loam (65.0-66.8%), followed by 59.4-61.3% in loamy sand and 38.6-45.3% in ERH. When growth parameters of runner plantlets were compared, ERH treatment was found to result in the highest crown thickness and fresh weights of root and above-ground parts. This had a favorable influence on above-ground tissue growth after transplanting to plastic house soil. As mentioned above, ERH treatment resulted in the highest seedling quality and early growth after transplanting. The results of this study would serve as useful on-site data for the production of high-quality strawberry seedlings.