• Korean Management Science Review
• /
• v.29 no.3
• /
• pp.45-65
• /
• 2012

Test and evaluation of weapon system is an important task to evaluate the performance of overseas weapon system purchasing project. Especially, quantitative evaluation of performances is hardly completed in defense projects where multiple criteria are conflicted each other. In order to solve this problem, we apply Axiomatic Design (AD) and Inner Dependence AHP method. First, finite functional requirements (FRs) are categorized in hierarchy structure by selecting proper design parameters (DPs) to implement their corresponding FRs. If there are no ways to select DPs when design is coupled between FRs and DPs, then inner dependence is allowed to overcome the strict rule of independence in AHP. Second, the weights of DPs are calculated by applying both Inner Dependence AHP method for coupled design and normal AHP method for uncoupled or decoupled design. Finally, information axiom of AD is applied to the proposed weapon systems by calculating information contents for all parameters. Weapon system with minimum sum of information contents is considered as the best solution. The proposed method in this study should be used in multiple criteria decision making problems involving various conflicting criteria.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.736-744
• /
• 2007

We propose a fast macroblock (MB) mode prediction and decision algorithm based on temporal correlation for P-slices in the H.264/AVC video standard. There are eight block types for temporal decorrelation, including SKIP mode based on rate-distortion (RD) optimization. This scheme gives rise to exhaustive computations (search) in the coding procedure. To overcome this problem, a thresholding method for fast inter mode decision using a MB tracking scheme to find the most correlated block and RD cost of the correlated block is suggested for early stop of the inter mode determination. We propose a two-step inter mode candidate selection method using statistical analysis. In the first step, a mode is selected based on the mode information of the co-located MB from the previous frame. Then, an adaptive thresholding scheme is applied using the RD cost of the most correlated MB. Secondly, additional candidate modes are considered to determine the best mode of the initial candidate modes that does not satisfy the designed thresholding rule. Comparative analysis shows that a speed-up factor of up to 70.59% is obtained when compared with the full mode search method with a negligible bit increment and a minimal loss of image quality.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.316-321
• /
• 2000

Die Casting is one of the forming methods to manufacture large number of products with short period time and clean surface by high forming pressure and temperature of cast alloy. Die design is composed of selection of cast alloy, design of die casting product, runner and gate design etc. In reality, however, die design of die casting has been performed by trial and error method, which cause economic and time loss. This paper describes a research work of developing computer-aided design of die casting product and die design. Approach to the CAD system has been written in AutoLISP on the AutoCAD with personal computer. In this study, die design system for gate of die casting process has been developed to present algorithm for automation of die design, especially runner-gate system. As forming process and die design system using 3-D geometry handling are integrated with technology of process planning, die design is possible to set. In addition, specific rules and equations for the runner-gate system have been presented to avoid too many trails and errors with expensive equipment. It is possible for engineers to make automatic and efficient die design of die casting and it will result in reduction of expense and time to be required. An example is applied to cap-shaped casting using proposed algorithm.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.493-499
• /
• 2003

현재 공시지가를 산정하는 과정에서 비교 표준지를 선정하는 작업은 지적 담당공무원의 수작업에 의하여 이루어지고 있다. 한정된 시간에 많은 개별필지의 비교표준지선정 작업으로 인하여, 객관적이고 합리적인 비교표준지를 선정하는 것에 어려움이 있다. 또한 현재 NGIS(국가지리정보체계)나 UIS(도시정보체계)등에 의한 국가적인 지형정보체계 구축사업이 급속도로 진전되고 있다. 이에 따라 토지의 가치평가의 한 분야인 개별토지의 지가산정작업도 최신의 자동화된 기법을 적용할 필요성이 증대되고 있다. 따라서, 본 연구에서는 비교표준지를 선정하는 작업을 자동화함으로써 수작업에 의한 주관적인 요소를 배제하고, 객관적이고 정확하게 비교표준지를 선정하는 방법을 알아보았다. 아울러 이러한 자동화 기법을 사용함에 있어서 공간의사결정모델을 이용하여 비교 표준지와 개별 필지간의 토지특성을 충분히 고려하여 비교표준지를 선정함으로써 정확도를 높이는 방안을 모색하였다. 본 연구에서는 다양한 의사결정기법 중에서 계층분석과정(AHP)기법, Concordance 기법 그리고 Ideal Point 기법을 사용하여 비교표준지를 선정하였다. 3가지 방법을 통하여 나온 결과를 현재의 비교표준지와 비교하여본 결과, 계층분석과정기법이 가장 현실성이 있는 대안으로 선정 되었다. 본 연구의 결과와 현재 사용중인 비교표준지를 절충하여 좀더 현실적인 비교표준지 선정이 이루어질 것으로 기대한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.3
• /
• pp.158-168
• /
• 2001

Die design of die casting is composed of selection of cast alloy, design of die casting product, runner design and gate design, etc. In reality, however, die design of die casting has been performed by trial and error method, which cause economic and financial loss. Nowadays, several FEM(finite element method) and FDM(finite difference method) codes have been developed to analyze process of die casting, but this is just confined to an offer of limited information for die design of die casting. In this study, die design system for gate of die casting process has been developed to present algorithm for automation of die design, especially runner-gate system. In addition, specific rules for runner-gate system have been presented to avoid too many trials and errors with expensive equipment. It is possible for engineers to make automatic and efficient die design of die casting and it will result in reduction of expense and time to be required.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.908-911
• /
• 2003

In this study, the security system (Firewall and IDS) was installed in high speed information network and analyzed for a change in the speed of data transfer and the possibility of invasion. The selection of appropriate system, efficient detection and protection and surveillance method were suggested and analyzed. In order to do experiments, an experimental model was comprized to analyze the parameters that was affected by the detection and protection system in network. This will give a standard how much we can pull up the security system maintaining the network speed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.481-484
• /
• 2003

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators have significant advantages over porcelain and glass insulators. With the gradual improvement of their design and material, their reliability has also increased. It is however difficult to establish how they will perform after several years of service. Aging of the insulator weathershed may lead to damages such as excessive chalking and crazing, erosion and tracking which affect the insulator performance. In service insulator are subjected to aging stresses such as humidity, pollution and electrical field which act singly or in combination. There have been numerous accelerated laboratory tests developed with the intention of evaluating suitability of polymeric materials. Some of these are strictly material tests, where as, others evaluate full scale devices. Service experience plays a key role in the utility selection of polymer insulator, but is time consuming, and may not always be available. Hence there is a need for a meaningful and reliable accelerated aging test for polymer insulator. This paper describes multi-stress aging test for reliability of polymer insulator This paper presents the rule of multi-stress aging test and test chamber for polymer insulator in korea electrotechnology research institute.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.855-862
• /
• 2009

This paper pointed out major problems of land use regulation policy surrounding Paldang Lake as follows: (1) inefficient management system, (2) inconsistent administrative management, (3) illogical selection of regulated area, (4) contradictory present system, and (5) controversial discharge control. Several regulation laws for the land-use surrounding Paldang Lake caused confusion of application and inefficiency of management. Amendment of regulation laws made it possible that the regulated area was developed, which resulted in the deterioration of water quality. In addition, successive regulations without scientific implementation overexpanded regulated area and focus on the discharge concentration of contaminated sources stimulated development of small size sources. To overcome these problems, we suggested reestablishment of regulated area, differentiation of regulation amendments, and flexibility in the application of regulation. It is necessary to arrange regulated area based on the efficient land use management and scientific implementation and then to mitigate land use regulation under the sustainable development. For the flexible application of regulation, it is required to amend the rule in response to the change of environmental condition and development of environmental techniques.

• Smart Media Journal
• /
• v.4 no.1
• /
• pp.52-57
• /
• 2015

Currently the gamification as marketing technique has appeared in the field non-related with game, applied to game elements. The alternate reality game pulled down the boundary between the real and the virtual has come out. New trend game has shown beyond the range of the existing game. The possibility has import into online baseball simulation game. The objective of this research is the exploratory approach to build GOMS model through three subjects to the famous pro-baseball manager game. After game playing session, three subjects' utterance with game experience was recorded. We built the goal hierarchy of goal in GOMS to pro-baseball manager game to analyze the vocabulary in three subjects' utterance. We try to find the possibility of gamification in alternate reality game interacting between the real and the virtual, and demolishing them.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.1
• /
• pp.1-8
• /
• 2006

This paper proposes a real-time resource allocation algorithm for minimizing the completion time of overall workflow process. The jobs in a workflow process are interrelated through the precedence graph including Sequence, AND, OR and Loop control structure. A resource should be allocated for the processing of each job, and the required processing time of the job can be varied by the resource allocation decision. Each resource has several inherent restrictions such as the functional, geographical, positional and other operational characteristics. The algorithm suggested in this paper selects an effective resource for each job by considering the precedence constraint and the resource characteristics such as processing time and the inherent restrictions. To investigate the performance of the proposed algorithm, several numerical tests are performed for four different workflow graphs including standard, parallel and two series-parallel structures. In the tests, the solutions by the proposed algorithm are compared with random and optimal solutions which are obtained by a random selection rule and a full enumeration method respectively.