• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.71-74
• /
• 1995

In this paper, a new PID fuzzy controller(FC) based on parallel operation of PI and PD fuzzy control is presented. First, two fuzzy rule bases are constructed by separating the linguistic control rule for PID FC into two parts : one is e-.DELTA.e part, and the other is .DELTAL.$^{2}$e-.DELTA.e part. And then two FCs employing these rule bases indivisually are synthesized and run in parallel. The incremental control input is determined by taking weighted mean of the outputs of two FCs. The proposed PID FC improves the transient response of the system and gives better performance than the conventional PI FC.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.550-552
• /
• 2022

A video wall controller has a special type of multi-monitor that displays multiple monitors on a single large screen by arranging them consecutively. Operator maps and stores the video and monitor in advance. In a small system the mapping task of videos and monitors is simple. But as the number of monitors increases, the number of mapping cases increases, and thus work efficiency decreases. In this paper, we propose a association rule-based recommender system which help improve the efficiency of mapping task.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.24.2-27
• /
• 1996

This paper is a study on the fuzzy force control of a miniature gripper driven by piezoelectric bimorph actuator. The system is composed of two flexible cantilevers, a stepping motor, a laser displacement transducer and two semiconductor force sensors attached to the beams. Obtained results show that the present artificial finger system works well as a miniature gripper, which produces approximately 0.06N force in the maximum. Further, the fuzzy position/force control algorithm is applied to the soft-handing gripper for stable grasping of a object. It revealed that the fuzzy rule-based controller be efficient controller for the stable drive of the flexible miniature gripper. It also showed that two semiconductor strain gauges located in the flexible beam play an important roles for force control, position control and vibration suppression control.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.117-121
• /
• 1990

The control process involving pure time delays presents a continuing challenge to the control system engineer. The nonlinear nature of the delay which can be introduced into the system make the use of conventional control algorithms a poor prospect. The Smith Predictor was developed to alleviate this problem. Unfortunately the quality of control achieved with the Smith Predictor is known to be sensitive to modelling errors. Only recently have researchers attempted to quantify the Smith Predictor controller's robustness to modelling errors. In several studies stability boundaries were plotted as functions of errors in parameters. But the research results address the question of performance of Smith Predictor controllers, In this paper, the Rule based Expert Systems for performance improvement of the Smith Predictor controller are developed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.3
• /
• pp.241-245
• /
• 2001

The existing fuzzy traffic controllers construct the rule-base based on the intuitive knowledge and experience or the standard rule-base, but the rule-base constructed by the above methods has difficulty in representing exactly and detailedly the control knowledge of the export and the operator. Therefore, in this paper, we propose a method that can improve the performance of the fuzzy traffic control by designing the fuzzy traffic controller which represents the control knowledge more exactly. The proposed method so modifies the position and shape of the fuzzy membership function based on the input-output data clustering that the fuzzy traffic controller can represent the control knowledge more exactly. Our method use the rough control knowledge based on intuitive knowledge and experience as the evaluation function for clustering the input-output data. The fuzzy traffic controller designed by the our method could represent the control knowledge of the expert and the operator more exactly, and it outperformed the existing controller in terms of the number of passed vehicles and the wasted green-time.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.470-479
• /
• 2016

The model based method for energy saving of the separately excited DC motor drive system is proposed in the paper. The accurate power loss model is necessary for this method. Therefore, the adaptive tabu search algorithm is applied to identify the parameters in the power loss model. The field current values for minimum power losses at any load torques and speeds are calculated by the proposed method. The rule based controller is used to control the field current and speed of the motor. The experimental results confirm that the model based method can successfully provide the energy saving for separately excited DC motor drive. The maximum value of the energy saving is 48.61% compared with the conventional drive method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.1
• /
• pp.1-12
• /
• 1999

A design and DSP-based implementation of robust nonlinear speed control of a permanent magnet synchronous motor(PMSM) under the unknown parameter variations and speed measurement error is presented. The model reference adaptive system(MRAS) based adaptation mechanisms for the estimation of slowly varying parameters are derived using the MIT rule. For the disturbances or quickly varying parameters, a quasilinearized and decoupled model which includes the influence of parameter variations and speed measurement error on the nonlinear speed control of a PMSM is derived. Based on this model, a boundary layer integral sliding mode controller to improve the robustness and performance of the nonlinear speed control of a PMSM is designed and compared with the conventional controller which employs Proportional plus Derivative(PD) control. To show the validity of the proposed scheme, simulations and DSP-based experimental works are carried out and compared with the conventional control scheme.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.142-146
• /
• 1995

In the paper, Fuzzy Logic Controller(FLC) that determines its optimal coefficients using Genetic Algorithms is considered. It is also applied to the inverted pendulum problem known popularly as a standard plant. Flexibility of the inverted pendulum has been taken into account. In the results, Fuzzy Logic Controller under consideration successfully controls both rigid mode and flexible mode. The rule base of Fuzzy Logic Controller is automatically tuned using not only trial-error method but also Genetic Algorithms.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.56-67
• /
• 1998

This paper introduces a friction compensation fuzzy logic controller, which utilizes a rule-based approach. The paper explains the algorithm of the proposed controller and compares it with a conventional PID controller in simulations and experiments. For the experiments, the two control algorithms were implemented on a 3-axis milling machine in contour milling. These simulation and experimental analyses show that the proposed fuzzy logic controller has superior performance over conventional PID controllers In terms of part contour accuracy.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.173-183
• /
• 1998

In this paper, an auto-tuning method for fuzzy controller's membership functions based on the neural network is presented. The neural network emulator offers the path which reforms the fuzzy controller's membership functions and fuzzy rule, and the reformed fuzzy controller uses for speed control of induction motor. Thus, in the case of motor parameter variation, the proposed method is superior to a conventional method in the respect of operation time and system performance. 32bit micro-processor DSP(TMS320C31) is used to achieve the high speed calculation of the space voltage vector PWM and to build the self-learning fuzzy control algorithm. Through computer simulation and experimental results, it is confirmed that the proposed method can provide more improved control performance than that PI controller and conventional fuzzy controller.