• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1815-1817
• /
• 1999

In this paper, the generation of high pretilt angle in nematic liquid crystal (NLC) by dipping effect on three kinds of the rubbed polyimide (PI) surface was investigated. The generated pretilt angle of NLC increases due to dipping effect before rubbing treatment on two kinds of the rubbed PI surface with side chain. The generated pretit angle in NLC by using dipping effect after rubbing treatment on PI surface with short side chain is high compared to the PI surface with long side chain. The generated pretit angle of the positive type NLC $(\Delta{\varepsilon}>0)$ is higher as than that of the negative type NLC $({\Delta}{\varepsilon}<0)$ by using dipping effect before rubbing treatment on homeotropic layer. The generated pretilt angle of NLC is attributed to perpendicular component of permittivity ${\varepsilon}_{\perp}$ of NLC on rubbed PI surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.81-83
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of LNC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The generated NLC pretilt angles are about $3^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle measured at about $1.7^{\circ}$ lower on the glass substrate than by thin plastic substrate. It is considered that this alignment may be attributed to roughness of micro groove substrate. The tilt angle increases with increasing baking temperature for making polyimide layer using glass substrate. It was concluded that pretilt angle in the polyimide surface is attributable to the increasing of imide rato.

• Current Optics and Photonics
• /
• v.2 no.2
• /
• pp.185-194
• /
• 2018

Ultra-small optical anisotropy of a rubbed polyimide (PI) alignment layer is quantitatively characterized using the improved reflection ellipsometer. Twisted nematic (TN) cells are fabricated using the rubbed PIs of known surface anisotropy as alignment layers. Distribution of liquid crystal (LC) molecules in the TN cell is characterized using transmission ellipsometry. The retardation of the rubbed PI surface increases as rubbing strength increases. The tilt angle of the optic axis of the rubbed PI surface decreases as rubbing strength especially as the angular speed of the rubbing roller increases. Pretilt angle of LC molecules in the TN cell shows strong correlation with tilt angle of the optic axis of the rubbed PI surface. Both the apparent order parameter and the effective twist angle of the LC molecules in the TN cell decrease as the pretilt angle of LC molecules increases.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.1
• /
• pp.75-82
• /
• 2004

We have studied the influence of rubbing directions on electro-optic characteristics of the fringe field driven hybrid aligned nematic liquid crystal (LC) cell by computer simulation. When a LC with positive dielectric anisotropy is used, the results show that the driving voltage and transmittance decreases as the rubbing direction with respect to horizontal electric field direction increases. The reason for decrease in light transmission is the increase of tilt angle on the center of common electrode. In this paper, we have studied how the rubbing angle effects on the transmittance of the cell by investigating a distribution of electric field and LC director.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.1
• /
• pp.16-19
• /
• 2009

We have studied the liquid crystal alignment properties for various alignment methods on the homogeneous polyimide surface. Suitable liquid crystal alignment for one-side alignment cell on the polyimide surface by all alignment method was observed. Highly pre-tilt angle of the NLC for both-side rubbing cell was measured. But, low pre-tilt angle of the NLC for one-side ion beam and UV irradiation cell was observed. We consider that the pre-tilt angle of NLC for one-side ion beam and UV irradiation on the PI surface is lower than that of the PI surface with rubbing. Also, the suitable transmittance-voltage curves for the one-side rubbing TN-LCD on the PI surface with one-side UV irradiation were measured. Also, good response time characteristics of the one-side rubbing TN-LCD on the polyimide surface with one-side UV irradiation can be measured.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.398-398
• /
• 2010

To determine the molecular directionality of PI chains depending on rubbing condition, we measured the angle resolved near edge X-ray absorption fine structure (NEXAFS) spectra at C K-edge of the rubbed PI films. Twisted nematic mode PI (PI-TN) and in plane switching mode PI (PI-IPS) were introduced to examine the effect of rubbing conditions on the chain directionality. The average tilt angle a of the PI molecules was estimated through the measured intensity change of $C=C\;{\pi}^*$ in NEXAFS C K-edge spectrum by controlling the stage speed and the pile contact depth. After rubbing, the irregular molecular direction changed to a regular direction with a molecular tilt angle of $51.2^{\circ}$ for PI-TN and $49.6^{\circ}$ for PI-IPS at the rubbing condition of the roll speed of 1000 rpm, stage speed of 50 mm/sec, and file contact depth of 0.3 mm. The molecular tilt angle $\alpha$ was linearly decreased in the PI-TN and PI-IPS samples with increasing depth of the pile contact.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.4
• /
• pp.306-313
• /
• 1998

To elucidate the liquid crystal(LC) molecules alignment mechanism, it is important to determine the molecular orientation of the rubbed polymer surface molecules that directly contact with LC molecules. In this work, the molecular orientation on a rubbed surface of polyimide (SE-3310, Nissan) film has been studied by polarized FTIR absorption spectroscopy. It has been found that molecular chain on the rubbed surface of polymide film are oriented along the rubbing direction and are tilted up on an average by 5.0$^{\circ}$. In the SHG(Second Harmonic Generation) measurement, the pretilt angle of molecular chain on the poylmide fim was 4.6$^{\circ}$ fro, the surface plane. And the pedit angle of liquid crystal (ZLI-2293, Merck) molecules measured by crystal rotation method was 5.4$^{\circ}$in the same rubbing condition.

• Electrical & Electronic Materials
• /
• v.10 no.5
• /
• pp.461-466
• /
• 1997

In this paper, we developed the new non-rubbing liquid crystal (LC) alignment techniques in the cell with slanted non-polarized ultraviolet (UV) light irradiation on polyimide (PI) film. It is shown that the uniform alignment for nematic (N) LC is obtained by using slanted non-polarized UV light irradiation on PI surface. We successfully obtained that the pretilt angle of NLC is generated about 3.3 degree in the cell with slanted non-polarized UV light irradiation with 70 degree on PI surface, for the first time. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecular and the PI, which is broken the polymer by slanted non-polarized UV irradiation. Therefore, we concluded that the uniform LC alignment is attributed to anisotropic dispersion force due to photo depolymerization with slanted non-polarized UV light irradiation on PI surface.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.401-404
• /
• 2002

We have studied on response time of the fringe-field switching (FFS) TFT-LCD using the LCs with negative dielectric anisotropy related to rubbing angle. Simulation and experimental results shows that when a rubbing angle approached $45^{\circ}$, a slope of voltage-dependent curve is decreased such that the operation voltage is increased, however the whole response characteristic between inter-gray levels have a trend to be fast.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.324-327
• /
• 2001

Liquid crystal alignments on a rubbed polyimide layer were investigated by using optical transmission method. Using this technique, we also studied the pretilt angle of the polymer molecules near the surface of a side-chain polymer layer as a function of the rubbing strength. In particular, we obtained the optical characteristics of liquid crystal orientations and pretilt angles for LC cell photo-aligned by UV as well after rubbing alignment. High pretilt angle of 3.84 degree was obtained on the weekly rubbed polymide layer duribg UV irradation time of 60min.