• Elastomers and Composites
• /
• 제46권3호
• /
• pp.186-194
• /
• 2011

셀룰로오스계 천연섬유인 kenaf를 천연고무와 함께 균일하게 배합한 후 압축성형 방법을 사용하여 천연섬유/천연고무 복합재료를 제조하였으며, 이들의 가황거동, 경도, 인장특성, 인열강도 및 정적, 동적 특성에 미치는 kenaf 섬유함량의 영향을 조사하였다. 복합재료를 구성하는 천연섬유의 함량은 천연고무 및 배합제 대비 0, 5, 10, 15, 20 phr이었다. 실험결과 천연고무의 여러 가지 특성이 kenaf 섬유의 함량에 의존한다는 것을 나타내었다. Kenaf 섬유함량이 증가함에 따라 천연고무의 가황에 요구되는 토크는 높아진 반면 가황시간은 감소되었다. Kenaf/천연고무 복합재료의 경도, 인장탄성률과 인열강도는 섬유함량이 증가할수록 점차적으로 증가한 반면, 인장강도와 파단신장률 은 감소하는 경향을 보여주었다. 또한 kenaf 섬유함량이 증가함에 따라 천연고무의 정적 특성보다는 동적 특성의 변화가 더욱 크게 나타났다. 고무에 가해지는 에너지의 감쇄 또는 흡수와 밀접한 관계가 있는 손실인자도 섬유함량에 비례하여 증가하였다.

• 한국해양공학회지
• /
• 제14권4호
• /
• pp.49-55
• /
• 2000

This study has been investigated to apply fiber reinforced composites instead of asbestos as a friction material. the reinforced used was E-glass fiber and binder resin was phenol having good mechanical properties and heat resistance. And it has been also investigated the effect of molding conditions and some additives such and carbon black, alumina and rubber powder in E-glass fiber/phenol resin composite on the friction on the friction and wear characteristics. As a result, it was found that the molding conditions of E-glass fiber/phenol resin composites for friction materials had to be different from those of phenol resin and was found that the wear rate of E-glass fiber/phenol resin composites added alumina powder was higher than of composites added carbon black in the same wear distance. And it was found that friction coefficient of E-glass/phenol resin composites added carbon black was decreased and that of the composites added the powder of natural rubber and ABS rubber were increased compared to the composites.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.77-89
• /
• 2018

In the case of fiber/rubber composites for tire applications, the interfacial adhesion between fiber and rubber significantly affects the physical properties of the finished products. Generally, organic synthetic fibers used for tire cords are treated with resorcinol formaldehyde latex(RFL) primer on the surface of the fiber to improve the adhesion to rubber. Changes of adhesion between rubber and tire cords might weaken as temperature rises due to overheating of car engine and friction with road. In this study, the effects of temperature on the primer treated polyketone cord/rubber composites and the changes in interfacial adhesion were investigated. Polyketone cord/rubber composites were prepared after RFL solution treatment on the surface of polyketone fibers. After that, composites was thermally aged at different temperature conditions(60, 80, 100, $120^{\circ}C$) and times(1, 5, 10, 15days). The adhesion strength of polyketone cord/rubber composite treated with RFL primer was higher than untreated composite by more than 3 times. After heat aging, the adhesion strength of untreated polyketone cord/rubber composites increased while the RFL treated polyketone cord/rubber composites decreased somewhat.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.99-106
• /
• 1991

Result of an experimental study on the manufacture, the mechanical properties and waterightness of pitch-based carbon fiber reinforced fly ash.cement composites are presented in this paper. The carbon fiber reinforced fly ash.cement composites using early strength cement, silica powder and a small amount of stylene butadiene rubber latex are prepared with carbon fiber, foaming agents and mixing conditions. As a result, the mechanical and plysical properties such as compresive, tensile and flectural strengths, watertightness and cement composites are improved by using a small amount of stylene butadiene rubber latex.

• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1518-1525
• /
• 2006

Finite element analyses of structures made of the fiber reinforced composites require an adequate method to characterize the high anisotropic behavior induced by one or several layers of fiber cords with different spatial orientation embedded in a rubber matrix. This paper newly proposes a continuum based rebar element considering change of the orientation of the fiber during deformation of the composite. The mechanical behavior of the embedded fiber is modeled using two-node bar elements in order to consider the relative deformation and spatial orientation of the embedded fiber. For improvement of the analysis accuracy, the load-displacement curve of fiber is applied to the stiffness matrix of fiber. A finite element program is constructed based on the total Lagrangian formulation considering both geometric and material nonlinearity. Finite element analyses of the tensile test are carried out in order to evaluate the validity of the proposed method. Analysis results obtained with the proposed method provides realistic representation of the fiber reinforced rubber composite compared to results of other two models by the Halpin-Tsai equation and a rebar element in ABAQUS/Standard.

• 접착 및 계면
• /
• 제19권2호
• /
• pp.60-67
• /
• 2018

본 연구에서는 친환경 천연섬유인 케나프의 표면을 Chemlok 402를 함유하고 있는 접착용액으로 전처리하였을 경우, 케나프/천연고무 복합재료의 경화거동, 경도, 인장특성 그리고 마모특성에 미치는 섬유 표면처리 유 무, 섬유함량 및 섬유길이의 영향을 조사하였다. 복합재료를 구성하는 케나프섬유 함량은 평균 케나프섬유의 길이가 약 2 mm로 일정한 상태에서 각각 0, 5, 10, 15, 20 phr로 달리하였다. 또한 섬유함량이 5 phr로 고정된 상태에서 평균 섬유길이는 각각 2 mm, 35 mm, 70 mm로 달리하여 각 특성을 비교하였다. 천연고무 복합재료의 경화거동을 나타내는 Tmax 값과 tc90 값, Shore A 경도, 인장탄성률 그리고 마모저항성은 케나프섬유 함량과 길이에 크게 의존하였다. 이러한 특성들은 케나프섬유의 표면을 접착용액으로 전처리한 경우가 처리하지 않은 경우보다 더 우수한 특성을 나타냈다. 이러한 현상은 전처리된 케나프섬유와 고무매트릭스 사이의 계면접착 상태가 개선되었기 때문이다. 본 연구결과는 천연섬유강화 복합재료의 물성을 향상시키기 위해 접착용액의 적절한 사용이 가능하다는 것을 제시하여 준다.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.327-337
• /
• 2021

The uniformly dispersed Aramid and Poly (phenylene benzobisoxazole) (PBO) in a variety of rubber was investigated. The mechanical properties of rubber were characterized by hardness, tensile strength, elongation at break, heat resistance, oil resistance, cold resistance, ozone resistance measurements. The 3mm Aramid chopped fiber better tensile strength than the other Chopped fiber. The Aramid of 3mm chopped fiber showed excellent reinforcing in rubber composite because of homogeneous dispersion. Consequently, the best 3mm Aramid chopped fiber and rubber improved the tensile strength and elongation at break of the composite. Also, 3mm Aramid chopped fiber improved the oil-resistant, ozone resistant and cold resistant.

• Elastomers and Composites
• /
• 제57권3호
• /
• pp.107-113
• /
• 2022

The effects of fillers [talc, calcium carbonate, glass fiber, and EBR (ethylene-butene rubber)] on the shrinkage and mechanical properties of injection-molded polypropylene composites were investigated. The shrinkage correlated with the shape of the filler particles: at the same amount added, glass fibers with a large aspect ratio had the greatest effect on the shrinkage of polypropylene composites, followed by flake-shaped talc and granular calcium carbonate. It was confirmed that the addition of EBR rubber as an impact strength modifier reduced shrinkage proportionally to the added content. In addition, the addition of glass fiber resulted in the greatest increases in tensile and flexural strengths.

• Elastomers and Composites
• /
• 제54권3호
• /
• pp.182-187
• /
• 2019

To improve the mechanical properties of glass-fiber-reinforced polypropylene (PP) composites through interfacial adhesion control between the PP matrix and glass fiber, the surface of the glass fiber was modified with PP-graft-maleic anhydride (MAPP). Surface modification of the glass fiber was carried out through the well-known hydrolysis-condensation reaction using 3-aminopropyltriethoxy silane, and then subsequently treated with MAPP to produce the desired MAPP-anchored glass fiber (MAPP-a-GF). The glass-fiber-reinforced PP composites were prepared by typical melt-mixing technique. The effect of chemical modification of the glass fiber surface on the mechanical properties of composites was investigated. The resulting mechanical and morphological properties showed improved interfacial adhesion between the MAPP-a-GF and PP matrix in the composites.

• Elastomers and Composites
• /
• 제57권4호
• /
• pp.175-180
• /
• 2022

To produce a co-poly-para-aramid fiber (AF, Technora^®)-reinforced neoprene rubber composite, dispersion of AF in a neoprene matrix is investigated. The AF is then surface-modified by mercerization and acetone, plasma, and silane treatments to improve dispersibility. Finally, an internal mixer process is used to disperse the surface-modified fibers in the neoprene rubber matrix.