• 동력기계공학회지
• /
• 제17권1호
• /
• pp.85-90
• /
• 2013

Dry CVT consists of a driving pulley and a driven pulley joined by rubber V-belt. Each pulley consists of a fixed flange and a movable flange. The movable flange moves toward a fixed flange under the actuation of a centrifugal roller, as the driving pulley speed increases. The important claim which have an influence on the performance of the Dry CVT is the wear of the centrifugal roller. In this study ball type is proposed instead of roller type of movable flange to resolve the claim. Simulation is carried out for new model to verificate performance, experiments are carried out for new model to evaluate performances.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.39-43
• /
• 2012

This paper presents a study on the design of a pulling module for silicon ingot and an apparatus of manufacturing silicon single crystal ingot using the same method. The pulling module is conceptually designed by using TRIZ. Czochralski method(CZ) is representative way to manufacture single crystal ingot for wafers. The seed can be broken by high tension which is caused by large weight of a silicon ingot. The solution of this problem has been derived using 6SC(6 steps creativity)TRIZ. The pulling module is actuated by DC motor and rollers. High tension in the seed is removed by the rotate-elevate motion of rollers in the pulling module. A rubber belt is included in the rotate-elevate mechanism for increasing friction between rollers and silicon ingot.

• Elastomers and Composites
• /
• 제34권2호
• /
• pp.156-176
• /
• 1999

Rubber chemicals such as accelerators, antidegradants, vulcanizing agents, processing agents and retarders are very important to the production and protection of tires and rubber goods. The use of accelerators and antidegradants are evaluated in various tire components. This paper will focus on how to vulcanize tires economically and maintain the physical properties of each tire component without severe degradation due to oxygen, heat and ozone. Also, new non-nitrosoamine accelerators and non-staining antiozonants will be discussed. Lastly, the future requirements of antidegradants and accelerators in the tire industry will be reviewed. Tires have been vulcanized with Sulfenamides as primary accelerators and either Guamdine's or Thiurams as secondary accelerators to achieve proper properties at service conditions. However, interior components such as the carcass can be vulcanized with Thiazoles as a primary accelerator to cure faster than the external components. Using the combination of Sulfenamide with secondary accelerators in a tire tread compound and the combination of a Thiazole and Guanidine in a carcass compound will be presented with performance data. Uniroyal Chemical and another Rubber Chemical Manufacturer have developed, "Tetrabenzyl Thiuram Disulfide," (TBzTD) as a non-Nitrosoamine accelerator, which could replace Nitrosoamine generating Thiurams. This new accelerator has been evaluated in a tread compound as a secondary accelerator. Also, Flexsys has developed N-t-butyl-2-benzothiazole Sulfenamide (TBSI) as a non-Nitrosoamine accelerator which could replace 2-(Morpholinothio) -benzothiazole (MBS), a scorch delayed Sulfendamide accelerator. TBSI has been evaluated in a Natural Rubber (NR) belt skim compound vs. MBS. An optimum low rolling resistant cure system has been developed in a NR tread with Dithiomorpholine (DTDM). Also, future requirements for developing accelerators will be discussed such as the replacement of DTDM and other stable crosslink systems. Antidegradants are divided into two different types for use in tire compounds. Internal tire compounds such as apex, carcass, liner, wire breaker, cushion, base tread and bead compounds are protected by antioxidants against degradation from oxygen and heat due to mechanical shear. The external components such as sidewall, chafer and cap tread com-pounds are protected from ozone by antiozonants and waxes. Various kinds of staining and non-staining antioxidants have been evaluated in a tire carcass compound. Also, various para-phenylene diamine antiozonants have been evaluated in a tire sidewall compound to achieve the improved lifetime of the tire. New non-staining antiozonants such as 2, 4, 6-tris-(N-1, 4-dimethylpentyl-p-phenylene diamine) 1, 3, 5 Trizine (D-37) and un-saturated Acetal (AFS) will be discussed in the tire sidewall to achieve better appearance. The future requirements of antidegradants will be presented to improve tire performance such as durability, better appearance and longer lasting tires.

• 한국의류산업학회지
• /
• 제6권2호
• /
• pp.213-220
• /
• 2004

This study shows the result of the survey conducted for male adults who had to use wheelchairs. The objectives of this study are to develop and improve the clothes for the disabled people and to make those garments put into practice. For this purpose, the survey was conducted at first so as to understand the situation of the disabled peoples wearing clothes and the garment demands. This survey is to suggest the suited form of the pants they want. The result of the study is as follows. 1) The average age of the subjects was 38.4 years old. They have used wheelchairs for 12 years on the average. Most subjects two limbs were paralyzed because of the acquired spinal paralysis. 60 percent of them were wearing the urine bags all the time. The average size of the pants they purchased was 39 inches, which means that their waist and abdominal circumstance were very big. 2) Regarding the situation of wearing habits, although the subjects usually purchased ready-to-wear, most of them are very dissatisfied with them. Especially, they considered the size as their main dissatisfaction. The main concern for buying garments was how comfortable and mobile they are while wearing them. They also needed outdoor garments. Lastly, they looked forward to the shop specialized in the garments for disabled people. 3) The functional pants for adult men using wheelchairs had the same zipper as that of general pants. The waist belt was made of rubber to reduce the pressure on waist and to cover 2 inches (5 cm) of waist circumference. Also it should be made to secure each button within the belt in accordance with size. Finally, it was designed as formal wrinkled pants that had pockets within the reach of hands when the disabled used wheelchairs.

• 한국해안·해양공학회논문집
• /
• 제23권1호
• /
• pp.34-42
• /
• 2011

지구온난화로 인한 태풍 강도 증가와 장기해수면 상승에 대처하기 위하여 호안 및 방파제의 마루높이를 고정식으로 증가시키는 것이 일반적이다. 그러나 이와 같은 대처방식은 월파저지에는 효과적이나 수변공간의 바다 조망권을 저하시키는 단점을 가지고 있다. 본 연구에서는 황천 시에 전개시키고 평상 시 격납하여 월파저지와 조망권 확보 기능을 동시에 달성할 수 있는 일종의 동적 가변형 구조물인 고무막체 파라펫의 개발을 시도하였다. 본 구조물은 순전히 공기의 주입 및 배출에 의하여 제어되는 무인 작동 구조물로서 해황에 따라 원격제어가 가능하다. 고무막체 파라펫의 여러 최적형상이 도출되었으며 비선형 유한요소 프로그램을 사용한 수치해석 및 수리모형실험을 통하여 이들 파라펫들의 전개 및 격납 과정, 그리고 월파발생시의 거동 및 구조적 안정성을 검토하였다.

• Structural Engineering and Mechanics
• /
• 제16권4호
• /
• pp.371-390
• /
• 2003

The concept of the seismic slit shear wall was proposed in the early 1990's. A series of experimental and theoretic studies on the wall with reinforced concrete short connecting beams cast in the slit were carried out. In this paper another type of slit shear wall is studied. It is one with vertical slit purposely cast within the wall, and the rubber belt penetrated by a part of web shear reinforcement as seismic energy-dissipation device is filled in the slit. Firstly, an experiment under cyclic loading was carried out on two shear wall models, one slit and the other solid. The failure mechanism and energy-dissipation capacity are compared between the two different models, which testifies the seismic performance of the slit wall improved significantly. Secondly, for engineering practice purpose, a macroscopic analytical model is developed to predict the nonlinear behavior of the slit shear wall under cyclic loading. The mechanical properties of each constituent elements of this model are based on the actual behavior of the materials. Furthermore, the effects of both the axial force and bending moment on the shear behavior are taken into account with the aid of the modified compression-field theory. The numerical results are verified to be in close agreement with the experimental measurements.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.135-141
• /
• 2019

Polyphenylene sulfide (PPS) was filled with glass fiber (GF), aramid fiber (AF), and solid lubricants to improve the mechanical properties and wear resistance. The addition of GF effectively enhanced the tensile strength, flexural modulus, and impact strength of PPS, while solid lubricants such as polytetrafluoroethylene (PTFE), molybdenum disulfide ($MoS_2$), and tungsten disulfide ($WS_2$) lowered the friction coefficients of the composites to below 0.3. The ball nut and motor pulley of the electric power steering (EPS) were manufactured using the PPS composites, and feasibility was ascertained thereafter by conducting the durability test. The composites filled with GF and AF showed high mechanical strength, but slip occurred at the interface between the pulley and belt while testing above $50^{\circ}C$. When small amounts of lubricants were added, the slip was no longer detected because of the suppression of friction heat. It is realized that the low friction as well as high mechanical properties is important to ensure the reliability of plastic pulleys.

• Journal of Biosystems Engineering
• /
• 제41권3호
• /
• pp.201-207
• /
• 2016

Purpose: A water-spraying type automatic glochids removal system for cactus (Opuntia humifusa) stem was developed, and its performance was evaluated. The system was developed to reduce intensive human labor in removing glochids from cactus stem skin without inducing damage prior to further processing into value-added products. Methods: The developed system consists of conveyor and water-spraying systems. The conveyor system delivers cactus stems through water-spraying compartments and finally to a collecting box. In order to remove the glochids, rotating nozzles spray water over all areas (i.e., front and back faces and sides) of the cactus skin under controlled water pressure. Operating conditions such as conveyor speed, water pressure, angle of water-spraying nozzles, distance between conveyor belt and rotating nozzles, and angle of cactus flipping slide were adopted from our previous study and applied on the system design and manufacturing. The performance of glochids removal was evaluated by counting the number of glochids on the cactus stem before and after processing on the system. Results: The developed system performed efficiently and effectively under the pre-studied operating conditions except for the angle of cactus flipping slide. The new system had a glochids removal ratio of 94.1% without damaging the cactus skin. Considering the original number (approximately 30-60) of glochids, the remaining number was low (1-4), and most of them were found at the side edge of the cactus stem. This system can remove glochids from 360 cactus stems in 1 hr regardless of cactus size. Conclusions: The performance of the new system in glochids removal without damaging cactus skin is superior to any other existing device (i.e., brush type, rubber-friction type, and agitation type). The system is expected to be applied in cactus (O. humifusa) processing facilities.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.471-474
• /
• 2007

Eucalyptus plantations play a major role in the China's ecological, social, economic and other aspects and presently China is the second largest producer of Eucalyptus in the world next to Brazil. It was introduced as an ornamental tree during 1890 but later it became a commercial crop. During 1960s large number of Eucalyptus timber were used for railway sleepers and it was also used as shelter belt for rubber trees. It becomes one of the important national resources of commercial timber once the production reached to 5 million $m^{3}/yr$. Through Eucalyptus oil, it brought about 20% of foreign exchange. In the present study, it was aimed to estimate the Eucalyptus growing area in the southern Guangdong in China in terms of aerial extent and changes between 1991 and 2001 using Landsat TM and ETM+ data. Object based classification technique and subsequent temporal change detection analysis were followed to identify the changes between the periods. In the present study, the total area was divided into three classes viz., plantation area with trees, plantation area without trees and others. Object oriented classification was found to be more accurate in the present study. Overall increase of about 23.62 $km^{2}$ was noted between 1991 and 2001 in the plantation area. With reference to the present study area, the growth of Eucalyptus growing area was 7.4% in the 10 year periods. From this study it is clear that the area under Eucalyptus cultivation is growing considerably year by year in China. However, elaborate study must be conducted considering larger areas to accurately predict the growth of Eucalyptus growing areas.

• 패션비즈니스
• /
• 제22권5호
• /
• pp.96-112
• /
• 2018

This study developed the pants pattern, that improved appearance and gesture functions in clothes to resolve inconveniences in case of activities with being adequate in fitness of slim-fit pants for obese adolescents. The slim-fit pants pattern was developed through the fitting test after designing and making the pattern of the experimental clothing A(c/pu; 99/1%) with the primary commercial clothing as basic prototype, through the fitting test and implementation of the experimental clothing, modified and supplemented secondarily, and through the fitting test of the second experimental clothing, modified and supplemented tertiary. In terms of findings, first, as a result of analyzing the commercial slim-fit pants, it is interpreted to have projected an optical illusion, that appears to be slim due to being narrow in width of the front panel when observed from the front of the pants. Second, in the fitting test of the first experimental clothing, the prototype of commercial clothing was understood to have improved butt, crotch, waist and femoral regions. Third, pattern design of the second experimental clothing was allowed to decline abdominal pressure, in case of the sitting position, by making the crotch line in the front panel short and by handling it with a yoke belt, and was processed a difference between waist and hip circumference in the back panel, with a rubber band in the whole waist part. Fourth, in the gesture function test of the third experimental clothing, high evaluation was received in every item excluding the knee region.