• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.4
• /
• pp.335-338
• /
• 1992

A Cheju-leading mungbean cultivar Seonhwanogdu was seeded at 20, 30, 40, 50 and 60cm row width with within-row plant spacing of 10cm in mid-June of 1988 to 1990 to determine effects of row width on growth and seed yield of mungbean in Cheju area. Initial flowering and maturing dates were not influenced by the row width. Stem length, pods per plant, seeds per pod, 1000-seed weight linearly decreased as row width decreased because planting density increased. The relationship between seed yield and row width was quadratic, and the optimum row width with within-row plant spacing of 10cm for higher yield of mungbean was 40cm in Cheju.

• Clinics in Shoulder and Elbow
• /
• v.18 no.4
• /
• pp.197-205
• /
• 2015

Background: The purpose of this study was to evaluate the postoperative magnetic resonance imaging (MRI) results of minimal-tying (one medial-row tie among 4 medial-row sutures) on the medial-row in double-row suture-bridge configuration ($2{\times}2$ anchor with $4{\times}4$ suture stands). Methods: From 2011 March to 2012 July, 79 patients underwent arthroscopic rotator cuff repair using $2{\times}2$ anchor double-row configuration. The mean age was 61.3 years (range, 31-81 years). Two double-loaded suture anchors were used for medial-row. Four medial-row stitches were made with only one medial-row knot-tying (the most anterior suture). Lateral-row was secured using the conventional suture-bridge anchor technique; all 4 strands were used for each anchor. Repair integrity was evaluated with MRI at mean 6.2 months postoperatively. Retear and the pattern of retear, change of fatty infiltration, and muscle atrophy of supraspinatus were evaluated using pre- and postoperative MRI. Results: Repaired tendon integrity was 38 for type I, 30 for type II, 6 for type III, 4 for type IV, and 1 for type V, according to Sugaya classification. Considering type IV/V as retear, the rate was 6.3% (5 out of 79 patients). Medial cuff failure was observed in 4 patients. Fatty atrophy of supraspinatus was significantly improved postoperatively according to Goutallier grading (p=0.01). The level of muscle atrophy of supraspinatus was not changed significantly after surgery. Conclusions: Minimal tying technique with suture configuration of four-by-four strand double-row suture-bridge yielded a lower retear rate (6.3%) in medium to large rotator cuff tears.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.6
• /
• pp.411-414
• /
• 2005

The purpose of this study was to determine proper method for alternative row culture of two varieties to increase seed yield in soybean. The test varieties 'Hwangkeumkong' and 'Taekwangkong' which were planted monoculture of each variety, seeding after mixing same number of seeds of two varieties, 1-row alternation, 2­row alternation, 2-row 'Hwangkeumkong' and 1-row 'Taekwangkong' and 1-row 'Hwangkeumkong' and 2­row 'Taekwangkong'. Alternative planting of 1-row 'Hwangkeumkong' and 1-row 'Taekwangkong' resulted the highest canopy height and reduced lodging most effectively. The terminal and the 9th leaves of 'Taekwangkong' in alternative variety planting showed the higher photosynthetic ability than pure stand of that. Alternative planting of two varieties in every other row increased yield by $17\%$ in 'Hwangkeumkong' and by $8\%$ in 'Taekwangkong'.

• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.152-161
• /
• 2006

In order to test the capacity of Si(5 5 12) as a potential template for nanowire fabrication, Bi/Si(5 5 12) system has been studied by STM. With Bi deposition, Si(5 5 12) has been transformed to Si(3 3 7) terrace. Initially Bi atoms selectively replace Si-dimers and Si-adatoms with Bi-dimers and Bi-adatoms, respectively. With extended Bi adsorption, Bi-dimers adsorb on the pre-adsorbed Bi-dimers and Bi-atoms. These dimers in the second layer form Bi-dimer pairs having relatively stable $p^3$ bonding, Finally, the Bi-dimer adsorbs on the Bi-dimers in the second layer and saturates. It can be deduced that both surface transformation to (3 3 7) and site-selective Bi adsorption are possible due to substrate-strain relaxation through inserting Bi atoms into subsurface of Si substrate.

• Journal of Information Processing Systems
• /
• v.13 no.6
• /
• pp.1575-1584
• /
• 2017

As interest in big data has increased recently, NoSQL, a solution for storing and processing big data, is getting attention. NoSQL supports high speed, high availability, and high scalability, but is limited in areas where data integrity is important because it does not support multiple row transactions. To overcome these drawbacks, many studies are underway to support multiple row transactions in NoSQL. However, existing studies have a disadvantage that the number of transactions that can be processed per unit of time is low and performance is degraded. Therefore, in this paper, we design and implement a multi-row transaction system for data integrity in big data environment based on HBase, a column-based NoSQL which is widely used recently. The multi-row transaction system efficiently performs multi-row transactions by adding columns to manage transaction information for every user table. In addition, it controls the execution, collision, and recovery of multiple row transactions through the transaction manager, and it communicates with HBase through the communication manager so that it can exchange information necessary for multiple row transactions. Finally, we performed a comparative performance evaluation with HAcid and Haeinsa, and verified the superiority of the multirow transaction system developed in this paper.

• Journal of Power System Engineering
• /
• v.21 no.1
• /
• pp.70-79
• /
• 2017

The output power of turbine is greatly affected by the losses generated within the passage. In order to develop a better turbine or loss models, an experimental study was conducted using a linear cascade experimental apparatus. The total pressure loss and flow structures were measured at two cross-sectional planes located downstream of blade row. Measurement was conducted in a steady state for the several different locations of the blade row along the rotational direction. The blade row moved by 20 % of the pitch, and tip clearance was varied from 2% to 8%. Axial-type blades were used and its blade chord was 200mm. A square nozzle was applied and its size was $200mm{\times}200mm$. The experiment was conducted at a Reynolds number of $3{\times}10^5$ based on the chord. Nozzle flow angle sets to $65^{\circ}$ based on the axial direction and the solidity of blade row was 1.38. From the experimental results, the total pressure loss was greatly varied in the receding region than in the entering region. The flow properties within the blade passage were strongly changed according to the location of blade row.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.589-590
• /
• 2008

Sound absorption characteristics of audience seating is very important when design and simulate room acoustics of concert halls or multi-purpose auditoriums. Sound absorption characteristics of audience seats were measured in reverberation chamber by varying the row to row spacing and number of audiences. By the increment of the row to row spacing, sound absorption characteristics in mid frequency band was increased. Also, sound absorption was proportionated to the number of audience.

• International Journal of Fluid Machinery and Systems
• /
• v.5 no.4
• /
• pp.161-167
• /
• 2012

Small-sized axial fans are used as air coolers for electric equipment. There is a strong demand for higher power of fans according to the increase of quantity of heat from electric devices. Therefore, higher rotational speed design is conducted, although, it causes the deterioration of the efficiency and the increase of noise. Then, the adoption of contra-rotating rotors for small-sized fans is proposed for the improvement of the performance. In the case of contra-rotating rotors, blade row distance between the front and the rear rotors influences on the performance and the noise. Therefore, it is important to clarify the optimum blade row distance between front and rear rotors. The performance curves of the contra-rotating small-sized axial fan under the condition of different blade row distances are shown and the blade row interaction between the front and the rear rotors are discussed by the numerical results. Furthermore, the optimum blade row distance of the contra-rotating small-sized axial fan is considered.

• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.175-180
• /
• 2002

This study was conducted to examine the effect of row covering materials on the growth and yield of broccoli for early production in the open meld. Materials for plastic tunnel were row-covering (ventilating non-woven fabric), perforated film (2.3％ pore space) and P.E. film. The types of row covers were tunnel and covering period was one months after transplanting. The row cover and perforated film increased daily air and soil temperature by 3~4$^{\circ}C$ and 2~3$^{\circ}C$, respectively as compared to no covering. Also, relative humidities in those treatments were higher than those in P.E. and no covering. The row covering and perforated film enhanced plant growth. Broccoli grew best and abnormal head appeared the least with row covering treatment. Days taken for head formation, however, did not differ between treatments but the weight of curd was over 400 g in the treatment of row covering and perforated film covering. Marketable yield doubled under row covering as compared to no covering. The first harvest time was earlier by two weeks in row-covering. The results of this experiment indicated that covering row-cover film in spring cultivation was effective fer not only yield increase but also quality evaluation in early production of broccoli.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.155-159
• /
• 2004

This experiment was carried out to evaluate the microclimate of wheat canopy, growth and yield characteristics of wheat under north-south and east-west row orientation. The variety used in this experiment was "AG South 2000", which was developed in USA. Solar radiation, air temperature, relative humidity, and soil temperature were monitored by data logger from March to May in 2002, The ratio of light penetration to the bottom from the upper canopy was 36.8% in north-south and 21.4% in east-west row orientation. Temporal march of light penetration to the bottom from March to May decreased as wheat developed canopy structure and decreased a little from May as plant were matured. The highest light penetration to the bottom from upper canopy occurred at 13：00 in both north-south and east-west row orientations, respectively which were 36 times in north-south and 27 times in east-west row orientation, respectively. Daily maximum temperature at the bottom of canopy occurred at 14：00 with 29 times in north-south, while 19 times were obtained at 14：00 and 15：00, respectively in east-west row orientation. Relative humidity at the bottom of the canopy in east-west yow orientation showed higher than that of north-south row orientation. Occurrence of daily maximum soil temperature of north-south showed one hour later compared with east-west yow orientation. 1000 grain weight and test weight of north-south row orientation was higher than those of east-west vow orientation. Correlation coefficient between solar radiation of upper canopy and 1000 grain weight showed r=$0.8132^{*}$, and between air temperature of upper canopy and number of spikes per $\textrm{m}^{2}$ and 1000 grain weight showed significant positive correlation with r=$0.8139^{*}$, and r=$0.8293^{*}$, respectively.