• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.81-84
• /
• 2002

Dispersion of coolant jets in a film cooling flow field is the result of a highly complex interaction between the film cooling jets and the mainstream. In order to investigate the effect of blowing ratios on the film cooling of turbine blade, cylindrical body model was used. Mainstream Reynolds number based on the cylinder diameter was $7.1\;\times\;10^4$. The free-stream turbulence intensity kept at $5.0\%$ by using turbulence grid. The effect of coolant flow rates was studied for blowing ratios of 0.9, 1.3 and 1.6, respectively. The temperature distribution of the cylindrical model surface is visualized by infrared thermography (IRT). Results show that the film-cooling performance may be significantly improved by controlling the blowing ratio. As blowing ratio increases, the adiabatic film cooling effectiveness is more broadly distributed and the area protected by coolant increases. The mass flow rate of the coolant through the first-row holes is less than that through the second-row holes due to the pressure variation around the cylinder surface.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.5
• /
• pp.674-680
• /
• 1986

In this paper, a new design method for high density PLA by a simple row folding technique is proposed. The normal input line and its complement line of different two input lines are folded on the same row. Especially the only one input line pair of the different two input lines are folded by this method. Conseqently, the results of folding are better than those of conventional methods. An efficient technique of ordering columns is described. Also, constraints about outside circuitry are consideted in this algorithm. The proposed algorithm has been implemented on a personal computer by C language.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.1
• /
• pp.55-60
• /
• 2011

Numerical analyses of a turbine redesigned to achieving the weight reduction by equipping square nozzles and the original turbine have been conducted and the results have been compared. The results show that the turbine with square section nozzles has more even flow distribution at the first row rotor inlet and less inactive areas but the loss induced by wake is increased. Despite the wake loss, the newly designed turbine shows better performance than the original one. It has also been found that the turbine performance can be improved by reshaping its stator and second row rotor.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.123-128
• /
• 2005

This study purposes to increase the energy-saving effects by reducing excessive intensity of radiation of artificial lighting through analyzing daylight incident A photosensor sends amounts of detected luminous flux to digital control unit(DCU) as a signal and then, it can decide dimming ratios, received a proper dimming signal from DCU. Generally it Is effective to control artificial lighting with the different control ratio of each row by setting a photosensor as same numbers and rows as artificial lighting. However, it is ineffective to do in initial costs of systems aspect in offices. As a result of grasping the distribution of daylight previously, we can dim different dimming ratios to each row of artificial lighting by a single photosensor.

• Journal of Korean Society for Quality Management
• /
• v.19 no.1
• /
• pp.151-162
• /
• 1991

The purpose of this study is to propose a facility layout design algorithm based on artificial intelligence concept, and then to develop a computer program which is more practical than any other conventional facility layout design systems. The algorithm is composed of five step layout procedures; knowledge and data input, knowledge interpretation, priority determination, inference of layout design, and evaluation, In the step of priority determination, the algorithm is divided into single row and multi row layout problem. In the step of inference of layout design, alternatives are generated by constraints-directed reasoning and depth first search method based on artificial intelligence concept. Alternatives are evaluated by the moving cost and relationship value by interactive man-machine interface in the step of evaluation. As a case study, analytical considerations over conventional programs such as CRAFT and CORELAP was investigated and compared with algorithm propsed in this study. The proposed algorithm in this study will give useful practical tool for layout planner. The computer progran was written in C language for IBM PC-AT.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.3
• /
• pp.265-270
• /
• 2012

A finned tube type heat exchange module has been proposed for a multi-burner water tube boiler. Fin density and length increase in streamwise direction to equalize the evaporation for each module, which makes it difficult to apply conventional bulk design procedure. The design program has been improved by updating data for every row of tubes along the flow. A numerical simulation has been also conducted to evaluate the effect of inlet conditions and validated with experiment. The heat transfer of the first row has been underpredicted by the conventional Zhukauskas correlation, since the acceleration of the flow due to the blockage is not fully inflected. The fin tip temperature is also underpredicted by Bessel solution, because of the interaction with neighboring fins.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.528-533
• /
• 2007

A finned tube type heat transfer module has been proposed for a multi-burner water tube boiler. Fins change their geometry along the streamwise direction to maximize the performance, which makes it difficult to apply conventional bulk analysis. The design program has been improved by updating data for every row of tubes along the flow. A numerical simulation has been also performed to evaluate the effect of inlet conditions and validated with experiment. The heat transfer of the first row has been underpredicted by the conventional Zhukauskas correlation, where the acceleration of the flow due to the blockage is not fully inflected. The fin tip temperature is also underpredicted by Bessel solution, because of the interaction with neighboring fins.

• Journal of Applied and Pure Mathematics
• /
• v.5 no.5_6
• /
• pp.303-313
• /
• 2023

Generalized strictly diagonally dominant matrices have a wide range of applications in matrix theory and practical applications, so it is of great theoretical and practical value to study their numerical determination methods. In this paper, we study the numerical determination of generalized strictly diagonally dominant matrices by using the properties of generalized strictly diagonally dominant matrices. We obtain a new criterion for subdivision iteration determination of the generalized strictly diagonally dominant matrices by subdividing the set of non-prevailing row indices and constructing new iteration factors for the set of predominant row indices, new elements of the positive diagonal factors are derived. Advantages are illustrated by numerical examples.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1986-1991
• /
• 2003

To research on change of blade row flow field with tip clearance caused by upstream periodic wake, an apparatus that generate periodic wake through traversing cylinders were installed. Then how movement of upstream wake affect cascade flow and tip leakage flow were measured. Cylinder was installed in front of 50% of chord length, and traversing velocity was calculated at approximately 11.7m/s regarding inlet velocity and chord length. To measure three-dimensional velocity of flow inside blade row, single slanted hot-wire was used. From the results, when the periodic wake is inserted, the flow inside of cascade is dominantly affected by vortex that is generated from cylinder. This periodic wake affects passage vortex and tip leakage vortex.

• Geomechanics and Engineering
• /
• v.23 no.5
• /
• pp.481-491
• /
• 2020

Piles installed in row(s) are used as an effective technique to improve the stability of soil slopes. The analysis of pile-stabilized slopes require a reliable prediction of lateral resistance offered by the piles. In this work, an analytical solution is developed to estimate the lateral resistance offered by the stabilizing piles in sand and c - 𝜙 soil slopes considering soil arching phenomenon. The soil arching in both horizontal direction (between the neighboring piles) and vertical direction (in the active wedge in front of the pile row) are studied and their effects are incorporated in the proposed model. The shape of soil arch is assumed to be circular and principal stress trajectories are defined separately for both modes of arching. Experimental and numerical studies found in literature were used to validate the proposed method. A detailed parametric analysis was performed to study the influence of pile diameter, center-to-center spacing, slope angle and angle of internal friction on the lateral pile resistance.