• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.365-372
• /
• 2004

LNGC suffers a great heat inflow during navigation and this heat inflow inevitably boils off the LNG. The boiled off gas(BOG) is normally consumed as a fuel for ship's engine. The boiled off LNG means a loss of cargo during transportation in the viewpoint of shipper. Therefore, a contract between shipper and ship operator is made for the limitation of BOR under 0.15 ％/day based on laden voyage. This contract on BOR limit requires that ship's officer has a correct knowledge on BOR for his ship. nut, in most cases ship IS operated based on only officer's experiences. In this study, author presented a simple model to predict the BOG during navigation based on the existing precision heat exchange design technology about the heat distribution on the hull and heat inflow from outside through the hull. The BOG is calculated for ballast and laden voyage based on the actual weather conditions and verified by comparing with the measured BOG for the study ship. The study ship is a membrane type LNGC which is now servicing in Middle east route. Thus, the BOG prediction method which is presented in this study is expected to be used for an useful tool to manage the BOG in now servicing LNGC.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.95-106
• /
• 2015

Unused land is a new load of building and a linear improvement, expanding the loss of function of the road abandoned road construction sites, as well as existing roads is possible additional advantage. However, some space is overcharge checkpoints, materials yard, make this vehicle utilization and maintenance of the unfavorable situation, as vehicle rest area but unused land most of the space required for the use of the system management plan. We are analyzed the location, topographical features, cultural property and in the space which is geospatail open platform set up to classify the type of unused land. Depending on the type of unused land using the geospatial open platform performs a 3D model and a proposed model development and application taking into account the environment and landscape. To derive the Gangwon development Plan and design of future route unused land was becoming helps you make better use of unused land.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.183-196
• /
• 2022

Public transportation accessibility has been evaluated through minimum level of service for public transportation. However it is evaluated based operators rather than users. This study analyzed the users' accessibility(first-mile, last-mile) to public transportation using altteul transport card data. As a result of user's accessibility of public transportation, rural areas was lower than that in the urban areas. This study calssified type 1 and 2 based average approach time, and average approach time of Type 1 and 2 were more than average approach time of total area. We propsed an efficient introduction of autonomous public transportation on-demand service using delphi survey. As a result of delphi survey, experts agreed on 9 items regarding function, service item, route operation, approach distance, route mileage, punctuality.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.332-336
• /
• 2011

IN THIS STUDY, BASED ON THE TYPE OF HIGH SPEED RAILWAY TRACK VIBRATION CHARACTERISTICS WERE MEASURED AT KTX VEHICLE. KTX ROUTE BALLASTED TRACK HAS BEEN INSTALLED TOGETHER WITH THE CONCRETE TRACK. CONCRETE MUST BE TRACK IRREGULARITY THAN BALLASTED TRACK, VEHICLES VIBRATION VALUES THAT ARE SMALLER. ALSO, IN TERMS OF MAINTENANCE, CONCRETE TRACK IS KNOWN TO BE MORE FAVORABLE THAN THE BALLASTED TRACK. PHASE 2 IS THE KTX, DAEGU - BUSAN IS A SECTION OF CONCRETE TRACK. IN THIS STUDY, "KUUNG-BU HIGH-SPEED RAILWAY LINES" INSTALLED ON THE CONCRETE TRACK AND BALLASTED TRACK KTX FROM THE VEHICLE WHEN INSTALLED BETWEEN RAILS, SLEEPER AND BALLAST ON THE TRACK WAS MEASURED VIBRATIONS.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.2
• /
• pp.80-84
• /
• 2014

Phosphorus (P) is an essential nutrient for all living organisms. P is mostly obtained from mined rock phosphate. However, existing rock phosphate reserves could be exhausted in the next 50-100 years. As Korea is totally dependent on imported rock phosphate, we should seek for solution to overcome the P depletion by efficient use and recycling. For this, this study suggested a P flow model to identify the location and flow route of P in urban area based on traditional material flow analysis. The type of P entering the urban areas are fertilizer, food and feed. Each type of P is used in agriculture, human consumption and animal husbandry. After going through each process, P is moved to waste management facilities within food waste, excreta and sewage. Some portion of P in waste are buried, incinerated and discharged, which can be reservoir of P in the future.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.469-475
• /
• 2010

The operation scenarios, types of ice, draft and propulsion system are important design point on the beginning stage of the ice breaking vessel. The concept of hull form in ice breaking vessel has to compromise the performance according to the operation route especially if ship is operating in ice and ice free water. The several hull forms were proposed to optimize the capability of the vessel in this paper. The effect of hull form according to type of ice is also discussing and explaining the ice resistance in each ice type as like pack ice, brash ice, level ice, rubble ice and ice ridge. The draft effect was examined and propulsion system for example FPP(Fixed pitch propeller), CPP(Controllable pitch propeller) and POD system was compared focusing on the propulsion efficiency.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1192-1200
• /
• 2008

This paper is concerned with the thermal design of the $138,000m^3$ class membrane type LNGC. To predict the temperature distribution, BOG and BOR, 3-dimensional numerical calculation was carried-out for the quarter of No.3 LNG tank. These sequence analyses were performed under the standard conditions of IMO ship design condition, USCG ship design condition and the Korean flag LNGC's route condition according to the 6-voyage modes. As the results, temperature behavior, heat flux, total penetrating heat, BOG and BOR were obtained, and those were compared with the maneuvering results considering the real temperature variation of air and sea water temperature at noon time. For securing the safety of LNGC during the ballast voyage, optimum control patterns of pressure and temperature in LNG tank is suggested in this paper.

• Journal of the Korean Ceramic Society
• /
• v.29 no.11
• /
• pp.855-862
• /
• 1992

Thermoelectric power, electrical conductivity and Hall effect were measured, as functions of temperature in the range of 100 to 600 K, on polycrystalline Bi4/3Sb2/3Te3 which had been prepared via uniaxial hot-pressing at different temperatures in the range of 373 K to 773 K, aiming at searching a profitable processing route to a polycrystalline thermoelectric material, a promising, viable alternative to a single crystalline one. It was found that, with increasing temperature of pressing under a fixed pressure, the material, normally a p-type prior to being hot-pressed, underwent a transition to n-type. This transition was confirmed to be due to plastic deformation during hot-pressing and interpreted as being attributed to the change of the major ionic defect BiTe' into TeBi˙at temperature high enough for structure elements mobility. Thermoelectric figure-of-merit of the hot-pressed material was discussed in connection with the p-n transition in addition to microstructure.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.4
• /
• pp.175-187
• /
• 2004

We consider the simultaneous selection of part routes for multiple part types in Flexible Manufacturing Systems (FMSs). Using an optimization framework we investigate two alternative route assignment policies. The one, called routing mix policy in the literature, specifies the optimal proportion of each part type to be produced along its alternative routes, assuming that the proportions can be kept during execution. The other one, which we propose and call pallet allocation policy, partitions the pallets assigned to each part type among the routes. The optimization framework used is a nonlinear programming superimposed on a closed queueing network model of an FMS which produces multiple part types with distinct repeated visits to certain workstations. The objective is to maximize the weighted throughput. Our study shows that the simultaneous use of multiple routes leads to reduced bottleneck utilization, improved workload balance, and a significant increase in the FMS's weighted throughput, without any additional capital investments. Based on numerical work, we also conjecture that pallet allocation policy is more robust than routing mix policy, operationally easier to implement, and may yield higher revenues.

• Proceedings of the Korea Port Economic Association Conference
• /
• 2007.07a
• /
• pp.37-50
• /
• 2007

Taking advantage of geographical position of Korea located on the main route of world-wide service, Port Logistics Industry can be strategic industry which secures international competitiveness necessary for Korea to be hub of Northeast Asian's logistics. Along with the advent of super large container vessel, world ports environment changed from "milkway" type, which means vessel calls every port for service to "Hub & Spoke" type, which means vessel calls regional central port and feeder service for the rest ports. As environment changes, regional ports in Northeast Asia are competing each other tougher and tougher and introducing or developing port logistics information system based on state-of-the-art technology in order to adapt themselves to new environment, thus to be Hub port. Taking this situation into consideration, we want to define clearly the meaning and scope of port logistics IT and review the global trend of port logistics IT. Finally we want to find future development of port logistics IT which we have to achieve.