• 한국생산제조학회지
• /
• 제6권2호
• /
• pp.19-25
• /
• 1997

The purpose of this study is the development of professional measuring system of piston. Designed values are compared with values of measured data of oval shape piston and allowable range and deviation are printed out by using this system. Thereafter, it is able to measure ovality precisely and to estimate its quality rapidly.

• 한국정밀공학회지
• /
• 제13권4호
• /
• pp.67-74
• /
• 1996

3차원좌표측정기(Coordinate Measuring Machine)의 공간오차(Volumetric error)의 측정을 위하여 홀-플레이트(Hole-Plate)를 이용하는 방법이 연구되었다. 티타늄 또는 세라믹으로 제작되는 홀-플레이트의 설계 예를 보였다. 홀-플레이트의 측정홀 숫자와 진원도(Roundness)의 영향이 연구되었으며, 또한 홀-플레이트의 설치시 발생하는 오차도 검토되었다. 3차원좌표측정기의 공간오차성분 모두를 별도로 측정하는 방법이 제안되었다. 홀-플레이트를 이용 2차원 및 3차원 공간의 길이 오차를 직접적으로 측정하는 방법도 소개되었다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.32-38
• /
• 2003

An analytical model of the interference phenomena in the centerless grinding process is developed to investigate their effects on the roundness profile of a centerless ground workpiece. In this work, the regulating wheel and work-rest blade interferences are modeled as a single point contact. The grinding wheel interference is modeled as multiple points contact because material removal is determined by the duration of contact. The computer simulation results show good agreement with the experimental data. From this work, the existence and effects of the interference phenomena in the centerless grinding process are found.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.20-22
• /
• 2005

In this study, deformation of flange of pedestal crane due to Lug welding and lifting. Thermo elasto-plastic analysis was performed using commercial FE code MSC/MARC. The accuracy control of roundness is critical to the final product assembly. Deformation is mainly occurs during Lug welding. So, we determine welding sequence and Lug space in order to reduce deformation. And we also investigate safety of lifting Lug during crane lifting.

• Journal of Biosystems Engineering
• /
• 제24권1호
• /
• pp.59-66
• /
• 1999

Weed identification is important for precision farming. A machine vision system was applied to detect weeds. Shape features were analyzed with the binary images obtained from color images of radish, purslane, goosefoot, and crabgrass. Features studied were aspect, roundness, compactness, elongation, PTB, LTP, LTW, and PTAL of each plant. Discriminant analysis was used to classify plant species. The best shape features that distinguished crabgrass were LTP and LTW which distinguished the crabgrass from the others with 100%. Two dimensional discrimination by using LTP and PTB appeared to be effective for distinguishing radish, purslane, and goosefoot.

• 한국기계연구소 소보
• /
• 통권20호
• /
• pp.21-26
• /
• 1990

In order to satisfy the industrial requirements to measure the rotational error motion of main spindles and to find out the source of the error motion, some measuring systems were made. Their measuring principle are based on the 3-point roundness measurement. In these measuring systems, the measurements are processed by digital calculation technique and the form error and the rotational error motion of main spindles are spearated. In the present paper, the principle of 3-point metnod is introduced and some application examples are shown.

• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.155-161
• /
• 2000

Recently, environmental pollution has become a big problem in industry and many researches have been done in order to preserve the environment. In the grinding process, the coolant has great influence on environment. It contains several chemicals(sulfur, phosphorus and chlorine) to improve the grinding efficiency. If these additives go into the workplace atmosphere, it is harmful for workers. It can also cause the environment pollution. Because of these reasons many studies have been done to minimize the amount of coolant. However the small amount of coolant can cause the thermal defect on the ground surface layer. This study forced the effects of the compressed cold air when the spindle shaft materials(SCM4 & SCM21) were cylindrical ground with WA wheel. The compressed cold air was used as the coolant and grinding performance was compared with that of the conventional grinding fluids(emulsion). Many experiments were carried out with these two cooling materials. The surface roughness, residual stress, and roundness were measured for the cylindrical grinding. The test results showed that the compressed cold air was very useful as the cooling materials for grinding process. It was also efficient to minimize the thermal defects of workpiece and could also play a role in solving environmental pollution.

• 대한지리학회지
• /
• 제38권4호
• /
• pp.505-517
• /
• 2003

본 연구는 우리나라의 서해안에서 해안사구의 발달이 탁월한 충청남도를 선정하여 해안사구의 구성물질이 어디에서 기원하는가를 구명하는 것을 목적으로 하였다. 기존의 문헌을 검토하고 예비조사를 거쳐 중점연구지역을 선정한 다음에 각종 자료를 분석하여 지역연구의 바탕으로 삼았다. 우리나라의 서해안은 수심이 얕아서 조차가 크기 때문에 조류의 작용이 활발한 것이 특징이다. 그러나 태안반도, 안면도와 같이 육지가 바다로 돌출한 지방에서는 파랑의 작용도 활발하여 비치가 나타나고 그 배후에는 해안사구가 발달하였다. 해안사구의 구성물질은 거의 대부분 석영과 장석으로 이루어졌으며 운모, 중광물도 섞여 있다. 사구사는 화강암기원의 것을 제외하면 입도가 아주 작고 원마도가 불량한 것이 특징이다. 이는 모래의 이동거리가 길지 않았음을 의미한다. 해안사구는 고조시에 파랑의 영향을 받아 후퇴한다. 해안사구의 트렌치에서는 플라이스토세층으로 생각되는 적색의 모래층이 관찰되는데, 이 모래층은 빙기의 산물이라고 판단된다.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.65-72
• /
• 1998

The BTA drilling chip is better for deep hole drilling than other self-piloting with pad drilling chips because the large length to diameter ratio allows a unique cutting force dispersion and better supplies the high pressure fluid. Therefore the BTA is useful for many tasks, such as coolant hole drilling of large scale dies, as well as tube seat drilling, which is essential for the heat exchanger, and variable component drilling for automobiles. Deep hole drilling has several significant problems, such as hole deviation, hole over-size, circularity, straightness, and surface roughness. The reasons for these problems, which often result in quality short comings, are an alignment of the BTA drilling system and the unbalance of cutting force by work piece and tool shape. This paper analyzes the properties through an experiment which com¬pared single-edge BTA drills with multiple-edge BTA drills, as well as the shapes of the tools to cause an unbalance of cutting force, and its effect on the precision of the worked hole. Conclusions are as follows. 1) In SMSSC drilling, 60m/min of BTA with single and multi-edged tools proved the best cutting condition and the lowest wear character. 2) The roundness got a little worse as cutting speed was increased, but surface roughness was hot affected. 3) It was proved that the burnishing torque of both drills approached 26%. which is almost the same as the 24% insisted on by Griffiths, and the dispersion characteristic of the multi-edged BTA drill proved better than the single-edge BTA drill.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.70-73
• /
• 2002

Using zirconium ceramics makes the ferrule, which is the part of optical communications. The quality of optical communications is directly affected by the concentricity of the optic ferrule. The products of optic ferrule should be meet the following general conditions which are the outer diameter of 2.5mm and the inner diameter of 0.125mm, and high quality conditions which are the concentricity of 0.1~$0.3\mu\textrm{m}$, the form accuracy of $0.2\mu\textrm{m}$, the roundness and the cylindricity of $0.1\mu\textrm{m}$ and the surface roughness of 10nm. Generally, the diamond wheel is used for the high efficiency and precision grinding of the materials. It is good for keeping the shape as it has little wear. Because of the loading phenomena, however, it is difficult to keep the fresh surface of the wheel. In grinding process, grinding fragments resemble fine powders rather than chips. It can easily get attached to the wheel surface and thus cause a loading. The loading takes place, in which the impurities stick to the wheel surface, and the grinding characteristics of wheel is deteriorated. To prevent all of these, a suitable dressing method should be used for the wheel. In this research, the dressing system fur co-axial grinding machine was designed and produced for the machining of ferrule, which is a high performance part. The performance of the developed dressing system was evaluated by measuring the form accuracy of ferrule, which is machined by the dressed wheel in developed dressing system.