• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1565-1574
• /
• 2000

Surface edge crack subjected to contact stresses is analysed. A punch with corner radii is considered to press the semi-infinite plane. Partial slip problem is solved when a shear force is applied to the punch. Dislocation density function method is used to solve the present mixed mode crack problem. The crack length of positive K1 is examined, which is affected by the ratio of the flat portion to the total width of the punch. Surface traction during one cycle of the shear force is evaluated to simulate the fretting condition. The compliance change of the contact surface is also investigated during the shear cycle. It is found that the crack grows during only a part of the cycle, which may be termed as effective period of crack growing. A design method for restraining the fretting failure is discussed, from which recommendable geometry of the punch is suggested.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.30-36
• /
• 1968

The measurements on the various items, such as arch form, kinds of anterior dental arch, degree of curvature in anterior dental arches, relationship between direction of the disto-incisal edge of the canine and first premolar, and kinds of posterior dental arch in upper dental arches were studied on 311 cases of the Korean adults aged from 20 to 30years. The results were as follows. 1. The commonest type of the upper dental arches was U-type (53.7%), the remaining were O-type (25.4%) and V-type (20.0%). 2. A slight curvature type (71.87%) prevailed against angulated curvature type in upper anterior dental arches. 3. The degree of curvature from $121^{\circ}$ to $160^{\circ}$ in anterior dental arches was common, and the degree of curve of 1-type with on curvature was smaller than 4, 5 type with two curvature. 4. The direction of the disto-incisal edge of canine went between the tip of the buccal cusp and the lingual incline of the buccal cusp of the first premolar in most dental arches and went lingual incline of the buccal cusp of the first premolar in U-type, from buccal cusp to lingual cusp of the first premolar in O-type and were distributed from buccal edge to central groove of the first premolar in V-type. 5. A posterior dental arch with almost straight curvature was common in 60.87%, and 4-type with a half rounded curve from first premolar to second molar was next.

• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.813-819
• /
• 1999

Inner crack-like pores with controlled amount of Ca impurity level in the high purity alumina single crystal sapphire had been created by micro-fabrication technique which includes ion implantation photo-lithography Ar ion milling and hot press technique. The morphological change and the healing of crack-like pore in the Ca doped high purity single crystal alumina during high temperature heat treatment in vacuum were observed using optical microscopy. The hexagonal bridging ligaments were developed and the size of hexagonal bridging ligaments had been increased with temperature and Ca amount and had grown to their corner rounded. It appeared that the hexagonal bridging ligaments would have an equilbrium size with temperature and the amount of Ca addition. Three kinds of crack-like pore healing type were observed. Edge regression and ligament growth were observed from relatively low temperature in the crack-like pore. Edge regression were found in almost all of the crack-like pore but the ligament growth were found only in the several crack-like pores accelerating heating very fast. Flow type healing was observed above $1800^{\circ}C$ and It healed the crack-like pore very slowly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.2
• /
• pp.1-10
• /
• 2006

In the present study, the aerodynamic characteristics of elliptic airfoils are investigated numerically based on the RANS equations and the S-A turbulent model on unstructured meshes. Unlike the NACA series airfoil sections, elliptic airfoils have a relatively small leading edge radius and a rounded trailing edge. Also the maximum thickness is located in the middle of the chord. This geometric characteristics are responsible for the difference in the aerodynamic characteristics from those of NACA family airfoils. To identify the aerodynamic characteristics of elliptic airfoils, the results were compared with those of NACA series airfoils with a same maximum thickness. The effect of airfoil thickness variation on the aerodynamic characteristics were also investigated.

• Tribology and Lubricants
• /
• v.1 no.1
• /
• pp.69-79
• /
• 1985

EHD(elastohydrodynamic) lubrication theories are applied to analyse the contact characteristies between the circular are profiled teeth of the plano-wheel gear and the cylindrical pin type teeth of the inner gear for the planocentric gears unit, For improving lubrication characteristic and contact frictional interference between the teeth, a new design method of optimising continuous meshing position is introduced, and the new tooth profile which is modified as a rounded curvature of the edge of circular arc is also suggested. The results of mathematical computation from conventional and the modified gear unit are compared, respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.25.2-25.2
• /
• 2009

Vertically aligned zinc oxide(ZnO) nanorods (NRs) with different surface morphology were grown by metal organic chemical vapor deposition (MOCVD) on sapphire substrate with different deposition condition. Based on the surface morphology, ZnO nanostructures are divided into three types: nanoneedles, nanonails and nanorods with rounded tip. Variable temperature photoluminescence (PL) have employed to probe the exciton recombination in high density and vertically aligned ZnO Nanorod arrays. Low temperature photoluminescence measurements do not show any significant yellow emission, but the near band edge excitonic emission shows very strong dependence with the surface morphology. The recombination properties are expected to be different due to different surface-to-volume ratio and distribution of potential fluctuations of intrinsic defects.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2011.04a
• /
• pp.226-230
• /
• 2011

The purpose of this study was to investigate the living environment design of orphanage based on universal design. The 3 orphanages which were rebuilded recently was selected and evaluated by checklists. The checklists which are based on 'Universal Design Principles' are consist of 120 items. The major results are summarized as follows: 1) The items related to safety were insufficient such as separation of pedestrian passage, rounded edge. 2) The items related to accessibility were high grade such as width of corridor, curb height. 3) Private zones for sleep, study and storage are needed more and living room is needed more furnitures for activities to increase friendship in the family of orphanage. The results will be expected to make contributions to developing orphanage environment design based on universal design, to understanding the nature of universal design paradigm.

• Korean Journal of Ichthyology
• /
• v.21 no.4
• /
• pp.273-282
• /
• 2009

The taxonomic review of the family Trachipteridae was carried out based on the Trachipterus ishikawae (7 specimens), Zu cristatus (4 specimens), Desmodema polystictum (2 specimens) collected from the East Sea, South Sea and adjacent waters of Jeju Island of Korea from June 2006 to August 2008. Among them, D. polystictum was revealed as an unrecorded species from Korea, being characterized by the following characters: the ventral edge smooth; body color silvery white with a lot of large dark rounded spot. We proposed the new Korean name of the genus Desmodema as "Jeom-tu-ra-chi-sog", D. polystictum as "Jeom-tu-ra-chi". Z. cristatus has a elongated first six dorsal fin and pelvic fin rays. T. ishikawae has a row of sharp tubercles along the ventral edge, and straightly elongated body form. In meristic characters, the number of dorsal fin rays were 178~195 in T. ishikawae, 137~148 in Z. cristatus and 125~130 in D. polystictum, the number of vertebrae were well distinguished among three species; T. ishikawae (80~83), D. polystictum (72~74) and Z. cristatus (65~68).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.535-543
• /
• 2014

A computational simulation for a nonslender BWB UCAV configuration with rounded leading edge and span of 1.0m was performed to analyze its aerodynamic characteristics. The freestream is 50m/s over -4 to 26 degree A.o.A.s. Reynolds number based on the mean chord length is $1.25{\times}10^6$. 3D multi block hexahedral grids are used which allow good grid quality and ease to capture boundary layer. ${\gamma}-Re_{\theta}$ model as well as $k-{\omega}$ SST model is employed to assess the effect of transition for flow behavior. Drag and lift of the UCAV were well predicted while $C_M$ is under predicted at high angle of attacks and influenced by the turbulence models strongly. After assessing pressure distribution, skin friction lines and velocity field around the UCAV configuration, it was found that transition effect should be considered to enhance the prediction of aerodynamic behavior by a vortical flowfield.

• ALGAE
• /
• v.31 no.3
• /
• pp.205-217
• /
• 2016

Freshwater red tides due to dinoflagellates have caused spectacular and regular “summer reddening” in recent years in Baishihai Lake, a temperate, meromictic, meso- or oligotrophic, high-altitude, landslide-dammed, deep lake located at the eastern edge of Tibetan Plateau in China. Based on morphological and molecular analyses, the causative organism has been identified as a new woloszynskioid dinoflagellate, Tovellia diexiensis Q. Zhang et G. X. Liu sp. nov. The vegetative cells are 20-32 μm long and 16-24 μm wide. They have a hemispherical episome and a broadly rounded hyposome with a short characteristic antapical spine. Usually cells are bright red due to the presence of numerous red-pigmented bodies, which often masked the yellowish green discoid chloroplasts. The amphiesma of motile cells comprise mainly quadrilateral, pentagonal or hexagonal thin plates, arranged in 4-5 latitudinal series on the episome, 1 in the cingulum and 4 on the hyposome. Molecular phylogenies based on small subunit ribosomal DNA and large subunit ribosomal DNA (LSU) indicate T. diexiensis from Baishihai Lake to belong to the family Tovelliaceae, which was monophyletic in our LSU phylogenies. During the bloom-forming period in 2005, cell density of T. diexiensis reached 9.15 × 10⁵ cells L⁻¹. Astaxanthin and its diester were found to be the major pigments in T. diexiensis, resulting in a characteristic blood-red color of the water in Baishihai Lake.