Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Crack Analysis under Fretting Condition by Rounded Punch

라운딩 펀치에 의한 프레팅 상태에서의 균열 해석

  • Published : 2000.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Surface edge crack subjected to contact stresses is analysed. A punch with corner radii is considered to press the semi-infinite plane. Partial slip problem is solved when a shear force is applied to the punch. Dislocation density function method is used to solve the present mixed mode crack problem. The crack length of positive K1 is examined, which is affected by the ratio of the flat portion to the total width of the punch. Surface traction during one cycle of the shear force is evaluated to simulate the fretting condition. The compliance change of the contact surface is also investigated during the shear cycle. It is found that the crack grows during only a part of the cycle, which may be termed as effective period of crack growing. A design method for restraining the fretting failure is discussed, from which recommendable geometry of the punch is suggested.

Keywords

References

  1. Timoshenko, S. P. and Goodier, J. N., 1970, Theory of Elasticity, 3rd ed., McGraw-Hill
  2. Muskhelishvili, I. N., 1977, Some Basic Problems of Mathematical Theory of Elasticity, Noordhoff, Leiden
  3. Hills, D. A., Nowell, D and Sackfield, A., 1993, Mechanics of Elastic Contacts, Butterworth-Heinemann Ltd
  4. Johnson, K.L., 1989, Contact Mechanics, Cambridge University Press
  5. Mindlin, R. D., 1949, 'Compliance of Elastic Bodies in Contact,' J. Appl. Mech., Vol. 16, pp. 259-268
  6. Cattaneo, C, 1938, 'Sul Contatto di Due Corpi Elastici: Distribuzione Locale Degli Sforzi,' Rendiconti dell' Accademia nazionale dei Lincei, Vol. 27, Ser. 6, p. 342
  7. Sackfield, A. and Hills, D. A., 1983, 'A Note on the Hertzian Contact Problem: A Correlation of Standard Formulae,' J. Strain Analysis, Vol. 18, No. 3, pp. 195-197 https://doi.org/10.1243/03093247V183195
  8. Smith, J. O. and Liu, C. K., 1953, 'Stresses due to Tangential and Normal Loads on an Elastic Solid with Application to Some Contact Problems,' J. Appl. Mech., Vol. 20, pp. 157-166
  9. 김형규, 1999, '종횡방향 사이클 전단하중 작용시 라운딩펀치에 의한 접촉 응력,' 대한기계학회 논문집 A 권, 제 23 권, 제 5 호, pp. 801-813
  10. Suh, N.P., 1977, 'An Overview of the Delamination Theory of Wear,' Wear, Vol. 44, pp. 1-16 https://doi.org/10.1016/0043-1648(77)90081-3
  11. 김상우, 김석삼,1994, 'Hertz 접촉하중하에서의 복수 표면균열의 상호간섭,' 대한기계학회 '94 춘계학술대회 논문집, pp. 170-173
  12. Kim, H.-K. and Lee, S.-B., 1996, 'Crack Initiation and Growth Behaviour of Al 2024-T4 under Fretting Fatigue,' Int. J. Fatigue, Vol. 19, No. 3, pp. 243-251
  13. Ko, P. L., 1985, 'The Significance of Shear and Normal Force Components on Tube Wear due to Fretting and Periodic Impacting,' Wear, Vol. 106, pp. 261-281 https://doi.org/10.1016/0043-1648(85)90112-7
  14. Ciavarella, M., Hills, D. A. and Monno, G., 1998, 'The Influence of Rounded Edges on Indentation by a Flat Punch,' Proc. Instn. Mech. Engrs., Part C, Vol. 212, pp. 319-328
  15. Nowell, D. and Hills, D. A., 1987, 'Open Cracks At or Near Free Edges,' J. Strain Analysis, Vol. 22, No. 3, pp. 177-185 https://doi.org/10.1243/03093247V223177
  16. Kim, H.-K. and Lee, S.-B., 1996, 'Stress Intensity Factors of an Edge Crack subjected to Normal and Shear Tractions,' Theo. Appl. Fract. Mech, Vol. 25, No. 2, pp. 147-154
  17. Dunders, J. and Sendeckyj, G.P., 1965, 'Behavior of an Edge Dislocation near a Bimetallic Interface,' J. Appl. Physics, Vol. 36, pp. 3353-3354 https://doi.org/10.1063/1.1702981
  18. Bueckner, H. E, 1958, 'The Propagation of Cracks and the Energy of Elastic Deformation,' J. Appl. Mech., Vol. 80, pp. 1225-1230
  19. Kim, H.-K., 1997, 'Behavior of a Surface Oblique Edge Crack in Fretting Fatigue,' Ph.D. Dissertation, KAIST, Taejon, Korea
  20. Erdogan, F. et al., 1973, Methods of Analysis and Solutions of Crack Problems, Mechanics of Fracture 1, G.C. Sih ed., Chapter 7, Noordhoff International Publishing, Leiden
  21. Krenk, S., 1975, 'On the Use of Interpolation Polynomial for Solutions of Singular Integral Equations,' Quarterly Applied Mathematics, Vol. 32, pp. 479-484
  22. Suh, N.P., et al., 1974, 'Further Investigation of the Delamination Theory of Wear,' J. Lubr. Tech., Vol. 96, pp. 631-637
  23. 김형규 외 3 인, 1998, '접촉면 마찰에너지 방출에 대한 펀치 형상의 영향,' 대한기계학회 충청지부 98추계학술대회 논문집,pp.169-174
  24. Elber, W., 1970, 'Fatigue Crack Closure under Cyclic Tension,' Eng. Fract. Mech., Vol. 2, pp. 37-45 https://doi.org/10.1016/0013-7944(70)90028-7