• Journal of the Korean Society of Costume
• /
• v.61 no.1
• /
• pp.58-68
• /
• 2011

With Expo 2012 Yeosu to be held in 2012, this study intends to propose designs for fashion cultural products into which the characteristics of local cultures of Yeosu are fused. Using symbols of Expo 2012 Yeosu and cultural symbols of Yeosu City as motifs, this study will develop patterns and then, apply them to neckties, handkerchiefs, and T-shirts. Adobe Illustrator CS2 and Adobe Photoshop CS2 will be used. This study developed basic motifs so that cultural resources using camellia, Odong Island, and the Turtle Ship, which represent Yeosu City, could be well harmonized with the topic of Expo 2012 Yeosu. This paper set three basic motifs of new formative images, using graphic images that were made by omission of forms, simplification, overlap, repetition, and calligraphy of the name of Yeosu holding the event. Each set motif was expanded to three motifs again through change, conversion, and mixture of colors, and three types of repetitive applied patterns were developed through revolution, symmetry, repetition, and reversal of each motif. The modern and refined image for neckties, to which the developed motif was applied, was made by directly applying the repetitive pattern of each motif or by making $45^{\circ}$ revolution. For handkerchiefs, revolution, enlargement, reduction, and gradation were applied to the motif so the pattern could be highlighted to the maximum and finally, a colorful image was developed. For T-shirts, three designs-a half-sleeved box type, a sleeveless round neckline type, and a sleeveless V-neckline tight type-were developed, through which availability of the design was increased. Through enlargement, reduction, revolution, and repetition of each motif, this paper layout the pattern on the whole part of a T-shirt, pursuing a decorative and casual image.

• Korean Journal of Digital Imaging in Medicine
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2012

This round of tests in patients with UGI and Esophagography data collected by national and international reference levels based on the original set of guidelines and fluoroscopy, through the provision of medical radiation exposure reduction and further optimization of Defense to realize that is intended. 359 names in our hospital underwent Esophagography 302 patients who underwent UGI average fluoroscopy time and number of images to calculate the average 21 cm Acryl phantom dose for 10 seconds and 20 seconds, average area dose and the area dose of 1 spot image, 5 spot consecutive images by measuring the patient dose and third quartile of the mean area dose was set seonryangin reference dose. Esophagography average patient dose was set to 30.05 $Gy{\cdot}cm^2$, DRL was set at a 25.37 $Gy{\cdot}cm^2$. Average dose of UGI patients were selected as 45.33 $Gy{\cdot}cm^2$, DRL was set at a 34 $Gy{\cdot}cm^2$. UGI patients with established average dose recommended in the 2008 national recommendation from the UGI examination with a dose of less than 49.7 $Gy{\cdot}cm^2$ seonryangin is evaluated. This Note examines the dose of self-aware through education recognizes the importance of dose reduction and examine if their efforts and further reduce patient dose could achieve optimization of the medical exposure is considered.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.6
• /
• pp.778-783
• /
• 1999

Campylobacter is a pathogen for both humans and animals that can be transferred from animals to humans. Four isolates, which grew under 5-10% $CO_2$ and had small and translucent colonies, were obtained from swine gastric mucosa and characterized using various methods. These bacteria were gram negative, spirally shaped with round ends. One or two non-sheathed polar flagella were observed under electron microscopy. A PCR with species-specific protein (SSP) primers for 16S rRNA gene in Campylobacter produced a typical 462 bp fragment. The isolates had various biochemical and molecular characteristics which differentiated them from other Campylobacters. The isolates were catalase and oxidase positive, urease (rapid) negative, nitrate reduction positive, indoxyl acetate hydrolysis positive, y-glutamyl transpeptidase negative, and alkaline phosphatase negative. All four isolates showed growth at $37^{\circ}C{\;}and{\;}42^{\circ}C{\;}but{\;}not{\;}at{\;}25^{\circ}C$, were resistant to cephalotin and cefoperazone, and susceptible to carbenicillin. The isolates showed various results in the reduction of chloride to triphenyl tetrazolium (TTC) and a susceptibility to nalidixic acid. Western blot analysis of these isolates with antiserum raised against one isolate showed different patterns from those of reference strains. A dendrogram drawn with the RAPD results showed that these isolates belonged to a new Campylobacter spp. group different from those of C. jejuni, C. doylei, C. lari, and C. coli.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.297-308
• /
• 1995

This study was designed to measure the absorbed dose to organs of special interest from full mouth with intraoral film(l4 films) and to compare the five periapical techniques. Thermoluminescent crystals(TLD-100 chip) were located in brain, orbit, bone marrow of mandibular ramus, bone marrow of mandibular body, bone marrow of 4th cervical spine, parotid gland, submandibular gland and thyroid gland. X -ray machine was operated at 70kVp and round collimating film holding device(XCP) and rectangular collimating film holding device(Precision Instrument) were used. The distance from the X-ray focus to the open end of the collimator was 8 inch, 12 inch and 16 inch. The results were as follows : 1. The absorbed dose was the highest in bone marrow of mandibular body(5.656mGy) and the lowest in brain (0.050mGy). 2. Generally, the lowest absorbed dose was measured from 16 inch cylinder, rectangular collimating film holding device with paralleling technique. But, in bone marrow of mandibular body and the floor of mouth, the highest absorbed dose was measured from 12 inch cylinder, rectangular collimating film holding device with paralleling techniques. 3. Comparing of five intraoral radiographic techniques, it was appeared statistically significant reduction of the absorbed doses measured with rectangular collimating film holding device compared to XCP film holding device (P<0.05). 4. No statistically significant reduction in the absorbed dose was found as cylinder length was changed(P>0.05).

• Annals of Clinical Neurophysiology
• /
• v.5 no.2
• /
• pp.187-191
• /
• 2003

Purpose: MEPs elicited by transmagnetic stimulations of the motor cortex are facilitated by voluntary muscle contraction. We evaluated the effects of the imagination of the movements on latencies of MEPs and reciprocal inhibition by using transmagnetic stimulations. Methods: Twenty two healthy volunteers(eight men and fourteen women) were studied. TMSs were delivered at rest and during imagining abducting or adducting right thumb. A stimulator with a round coil and a fixed intensity of 80% of maximum was used to evoke MEPs. MEPs were evoked by magnetic stimulations over the scalp and cervical spine(C7-T1), and central motor conduction times(CMCT) were calculated by subtracting the latency of compound muscle action potentials(CMAPs) obtained by stimulating over the cervical spine from that obtained by stimulating over the scalp. The motor evoked potentials were recorded from right abductor pollicis brevis muscle(APB) and adductor pollicis muscle(AP) simultaneously. Results: Imagination of abduction resulted in a shortened latency of the CMAPs in APB, and a prolonged latency in AP. Imagination of adduction resulted in a shortened latency in AP, and a prolonged latency in APB. But the imagination caused no significant change in the latency of CMAPs elicited by stimulation over cervical spine. Therefore, the changes of the CMCTs account for these latency changes with imagination of movement. With the imagination of abduction, there are significant reduction of the CMCT's in APB(10.8%) and prolongation in AP(5.8%). On the other hand, with the imagination of adduction, prolongation of the CMCT's in APB(7.3%) and reduction in AP(5.9%) were observed. Conclusion: These findings indicate that imagination of muscle contraction increases the excitability of the human corticospinal system. Reciprocal inhibition may be accountable for the prolonged latency in the antagonist muscle.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.364-367
• /
• 2007

Typical seamless tube production methods are an extrusion and a rotary tube piercing. The rotary piercing process is more competitive than the extrusion process form view point of productivity, quality, and flexibility. It consists of twin rolling mills, a pair of disc or flat guides, and a plug. Twin rolling mills are skewed with proper angles in two directions. A round billet is progressively fed forward and rotated due to the rotation of twin rolling mills. Internal crack initiation and growth at central area of the billet are gradually progress because of the repeating actions of tension and rotation. Design variables in the rotary piercing rolling process are the feed angle, the cross angle, the reduction ratio, and the position of plug. In this work, a rotary tube piercing machine was developed and parametric studies on design variables were carried out using finite element analysis. The Brozzo ductile fracture criterion was utilized to determine an internal crack initiation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1991.10a
• /
• pp.348-361
• /
• 1991

When reinforcing strip footing on a sand 8round with reticulated root piles, reinforcing effect depends on the length , number, cross sectional area, penetration angle, spacing, and Young's modulus of piles. the mode of action of reinfocement tendons in soil isn't one of carring developed tensile stresses but of anisotropic(uni-directional) reduction or even supression of one normal strain rate. R. H. Bassett and N. C. Last proposed that the reinforcement should be located on the direction of minor strain rate which coincides with the tensile strain rate in the velocity characteristics. Based on this proposal the author carried out a series of 2 - dimentional finite element analysis which varies the parameters mentioned above.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.228-232
• /
• 2001

Fatigue strength, electrical conductivity and stress-corrosion-cracking resistance are considered as important factors at aircraft Al alloys, therefore Al7050 alloy has been developed to improve such properties. However, hammer-forged Al7050 parts showed the undesirable structures such as severe local grain coarsening and inhomogeneous material flow, resulted in the degraded mechanical properties. In this paper, process conditions are investigated for elimination of the grain coarsening and improved material flow during forging process by both of experiments and FEM analysis. Particular interest has been given to understand role of preform shape on the grain coarsening behavior and magnitude of the hammer forging load The use of preform has been beneficial for reduction of the forging load and elimination of the grain coarsening. However, in the cases of as received bar and the round bar, which was machined to 2.5mm thickness in surface layer, some degree of local grain coarsening behavior has been observed. The optimized preform shape could be properly designed by applying the FEM simulation.

• The Research Journal of the Costume Culture
• /
• v.19 no.3
• /
• pp.460-472
• /
• 2011

This paper developed motifs through the use of images of masks with which the Korean innate consciousness of aesthetics is expressed. The motifs were applied to fashion items. This paper investigated the concept, origin and types of traditional masks through the existing literature. Using the computer graphic programs of Illustrator and Photoshop CS2, three basic motifs were set from the images of the nobleman, Bune of Hahoi Tal and Byeongsan Tal. Each motif was extended into two motifs by changing shape and color. For the basic motif design, this study sought to express contemporary images, suitably for each fashion item, while maintaining the basic shape of the masks and their traditional images. In addition, this study set the concept of the design so that could be accepted by various age groups. For the design of handkerchiefs, a rotating array, involving enlargement, reduction, repetition, and the gradation of motifs, as well as a diagonal symmetric array, and all-over patterns were developed. The T-shirt design created here was divided into a half-sleeve box type, a round neckline sleeveless type, a V-neckline close-fitting sleeveless type, and a V-neckline close-fitting cap sleeve type. For the design of necklaces, OLED or LED, which are considered as a future display type, was used. Additionally, the production of an entertainment styled new atmosphere is proposed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.3
• /
• pp.237-250
• /
• 1998

In this study, the characteristics of electrostatic bag filter to overcome the main problems such as the high pressure drop and low collection efficiency for submicron particles are investigated with the experimental parameters. Especially, the experiment is carried out focusing on collection efficiency and pressure drop change mechanism as a function of discharge electrode shapes and filter properties, including the applied voltages, filtration velocities and particle concentrations, etc . Results show that the collection efficiency is improved over 30% for the fine particle below 1 pm and pressure drop reduction ratio (PDRR) increases in the following order 4 mm screwy > 4 mm square > 4mm round discharge electrodes . For the filter properties, Nomex is more effective than PE under the influence of electrostatic force. Applying 30 kV for a screwy discharge electrode, higher overall collection efficiency is maintained in spite of the increment of filtration velocity over four times (8 m/min) in comparison with that of 2 m/min and PDRR are highly shown over 80o1o with various filtration velocities, 5, 8, 11 m/min.