• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.4
• /
• pp.77-85
• /
• 2002

We present the impossible differential cryptanalysis of the block cipher XTEA[7] and TEA[6]. The core of the design principle of these block ciphers is an easy implementation and a simplicity. But this simplicity dose not offer a large diffusion property. Our impossible differential cryptanalysis of reduced-round versions of XTEA and TEA is based on this fact. We will show how to construct a 12-round impossible characteristic of XTEA. We can then derive 128-bit user key of the 14-round XTEA with $2^{62.5}$ chosen plaintexts and $2^{85}$ encryption times using the 12-round impossible characteristic. In addition, we will show how to construct a 10-round impossible characteristic or TEA. Then we can derive 128-bit user key or the 11-round TEA with $2^{52.5}$ chosen plaintexts and $2^{84}$ encryption times using the 10-round impossible characteristic.

• Journal of information and communication convergence engineering
• /
• v.9 no.3
• /
• pp.260-265
• /
• 2011

In RFID System, when multiple tags respond simultaneously, a collision can occur. A method that solves this collision is referred to anti-collision algorithm. In 13.56MHz RFID system, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. In STAC protocol, there is no differentiation between the collided tags and others in the identification process. Therefore, tags may never be successfully identified because its responses may always collide with others. This situation may cause the tag starvation problem. This paper proposes a fair identification scheme for STAC protocol. In the proposed scheme, if the number of collided slots is large during a query round, the reader broadcasts a CollisionRound command to begin a collision round. During the collision round, the reader identifies only tags that are experienced collision during the previous query round.

• International Journal of Precision Engineering and Manufacturing
• /
• v.2 no.1
• /
• pp.87-93
• /
• 2001

A reliable analytic model that determines the exit cross sectional shape a workpiece(material) in round-oval (oroval-round) pass sequence has been developed. The exit cross sectional shape of an outgoing workpiece is predicted by using the linear interpolation of the radius of curvature of an incoming workpiece and that of roll groovw to the roll axis direction. The requirements placed on the choice of the weighting function were to ensure boundary conditions specified. The validity of the analytic model has been examined by not rod rolling experiment with the roll gap and specimen size changed. The exit cross sectional shape and area of the workpiece predicted by the proposed analytic model were good agreement with those obtained experimentally. We found that the analytic model has not only simplicity and accuracy for practical usage but also save a large amount of computational time compared with finite element method.

• Tribology and Lubricants
• /
• v.19 no.6
• /
• pp.349-356
• /
• 2003

A damper floating ring seal with round hole pattern surfaces is suggested for better leakage control. The flat plate test of the round hole pattern surfaces has been performed to yield an empirical friction factor model. The exact predictions of the lock­up position of the damper floating ring, the leakage performance, and the rotordynamic coefficients of the seal are necessary to evaluate the rotordynamic performance of the turbo pump unit. The governing equations including the empirical friction factor model for round hole pattern surfaces are solved by the Fast Fourier Transform method. The lock­up position, leakage flow rate, and rotordynamic coefficients are evaluated according to the geometric parameters of the damper floating ring seal. Theoretical results show that the damper floating ring seals yield less leakage and better rotordynamic stability than the floating ring seal with a smooth surface.

• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.23-28
• /
• 2004

Seat is one of the most important part of an automobile for passenger's safety especially when an accident happens. A recliner is a part of the seat assembly, having the function of adjusting the back-plate angle of a seat. Recently, many kinds of vehicles have adopted the round recliner module rather than the conventional types of recliners because of its broad compatibility and structural simplicity. In this study a two-dimensional finite element strength analysis has been performed using a commercial code ABAQUS/Standard for the purpose of developing a new round recliner model. The loading condition for the analysis is the same as the FMVSS 301 regulation. The finite element result for the round recliner has been compared with that for the conventional type.

• Journal of Mechanical Science and Technology
• /
• v.16 no.4
• /
• pp.492-500
• /
• 2002

This paper presents a study of the effect of varying the roll gap of oval pass in round-oval-round pass sequence on the interracial slip of workpiece, entrance and exit velocities, stresses and roll load that the workpiece experiences during rolling, by applying analytical method, finite element simulation and verification through hot bar rolling tests. The results have shown that the roll gap variation of oval pass affects the interfacial slip of workpiece along the groove contact and the specific roll pressure. The optimum conditions in terms of minimum interfacial slip and minimum specific roll pressure, which might influence the maximum groove life, is obtained when the subsequent round pass is completely filled.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.292-296
• /
• 2009

The performance of anti-collision algorithm in RFID systems, which are based on FSA algorithm, may be affected by the frame size a query round. In this paper, an anti-collision algorithm with early cancellation of query round is proposed to enhance the performance of EPCglobal Class-1 Gen-2. The Q-algorithm calculates a Q value to determine the next frame size during a query round. In the proposed algorithm, if the new Q value is different from the previous one, the reader transmits a QueryAdjust command to cancel the current query round. The simulation results show that the proposed algorithm can have a stable performance irrespective of the C value of Q-algorithm and the number of tags.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.98-106
• /
• 2006

The substructure of temporary bridges used during the construction period of main bridges needs to be simple and strong at the same time so that it doesn't block running water. When the water flow is hindered by sub-structure of the bridges, as it happens when H beams with bracing are used, either the water floods or the bridge gets damaged. Therefore, using round beams for the substructure and connect them together is a preventive choice considering the intensive raining in the summer. The bridges using round beams for the substructure have also benefited by fast construction because of fewer bracing and in-situ welding. Because the round-pile-connecting method is relatively new, the safety evaluation of the constructed bridge is an essential procedure before being used in the field. The field evaluation of a bridge including the vehicle loading test and moving load analysis has been conducted and the results showed the safety requirement is satisfied.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.834-836
• /
• 2000

The round HTS wire is easier to handle than the rectangular HTS tape. This paper describes the coupling losses of the round HTS wires by finite element method. Effect of filament arrangement and filament size of the round HTS wire are considered. Three types of filaments arrangement, one and double layer radial filaments and Multi-filament, are considered. Calculation results show that coupling losses of the one layer filaments round HTS wire vary only a little with the direction of external magnetic field.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.180-183
• /
• 2014

The purpose of this study is to assess for scattering object for the missile ejection round due to analysis of the human body effectiveness safely. To achieve this goal the measurement method of scattering objects by comparative 2 measurement methods studied, the risk of scattering of the object is evaluated. Result of this study, applied in Europe and Japan, based on the safety criteria for the human body effectiveness when missile ejection round. data showed is not effectiveness to the operator's body safely. Data showed that satisfies the safety criteria for missile ejection round in Europe and Japan through the similarity for the case studies. In case of these safety criteria does not exist regulation in South Korea, this study will be referred as guidelines are considered.