Tribology and Lubricants

Korean Tribology Society (한국트라이볼로지학회)
권호 표지
DOI QR코드

DOI QR Code

Leakage and Rotordynamic Analysis of Damper Floating Ring Seal with Round­Hole Surfaces in the High Pressure Turbo Pump

원형 단면 구멍 표면을 갖는 댐퍼 후로팅 링 실의 누설량 및 회전체 동역학적 특성 해석

  • Published : 2003.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

A damper floating ring seal with round hole pattern surfaces is suggested for better leakage control. The flat plate test of the round hole pattern surfaces has been performed to yield an empirical friction factor model. The exact predictions of the lock­up position of the damper floating ring, the leakage performance, and the rotordynamic coefficients of the seal are necessary to evaluate the rotordynamic performance of the turbo pump unit. The governing equations including the empirical friction factor model for round hole pattern surfaces are solved by the Fast Fourier Transform method. The lock­up position, leakage flow rate, and rotordynamic coefficients are evaluated according to the geometric parameters of the damper floating ring seal. Theoretical results show that the damper floating ring seals yield less leakage and better rotordynamic stability than the floating ring seal with a smooth surface.

Keywords

References

  1. Tribology International v.35 Leakage and Rotordynamic Analysis of a High Pressure Floating Ring Seal in The Turbo Pump Unit of a Liquid Rocket Engine Ha,T.W.;Lee,Y.B.;Kim,C.H. https://doi.org/10.1016/S0301-679X(01)00110-4
  2. Transactions of the ASME v.87-Trib-52 Analysis of Eccentric Annular Incompressible Seals : Part 1-A New Solution Using Fast Fourier Transforms for Determining Hydrodynamic Forces Nelson,C.;Nguyen,D.
  3. NASA Technical paper No.1987 Damping Seal for Turbomachinery Von Pragenau,G.
  4. Proceedings of the Third IFToMM International Conference on Rotordynamics An Experimental Study on the Static and Dynamic Characteristics of Damp Seals Iwatsubo,T.;Sheng,B.
  5. ASME Journal of Tribology v.108 Test Results for Round-Hole-Pattern Damper Seals:Optimum Configurations and Dimensions for Maximum Net damping Childs,D.;Kim,C.H. https://doi.org/10.1115/1.3261277
  6. ASME Journal of Tribology v.121 Test Results for Liquid "Damper" Seals Using a Round-Hole Roughness Pattern for the Stators Childs,D.;Fayolle,P. https://doi.org/10.1115/1.2833809
  7. 임의로 거칠게한 표면의 점성 마찰특성 하태웅;주영찬;이용복;김창호
  8. KSME International Journal v.12 no.3 A Modeling of Pump Impeller Shroud and Wear-ring Seal as a Whole and its Application to the Pump Rotordynamics Ha,T.W.;Lee,A.S.
  9. Journal of Tribology v.110 Analysis of Eccentric Annular Incompressible Seals : Part 2-Effects of Eccentricity on Rotordynamic coefficients Nelson,C.;Nguyen,D. https://doi.org/10.1115/1.3261634
  10. ASME J. of Applied Mechanics The Stability of an Elastic Rotor in Journal Bearings with Flexible, DampedSupports Lund,J.