• Title/Summary/Keyword: Rough surface

Search Result 938, Processing Time 0.032 seconds

Chemical weathering in King George Island, Antarctica

  • Jeong, Gi-Young
    • Proceedings of the Mineralogical Society of Korea Conference
    • /
    • 2003.05a
    • /
    • pp.66-66
    • /
    • 2003
  • King George island, Antarctica, is mostly covered by ice sheet and glaciers, but the land area is focally exposed for several thousand years after deglaciation. For a mineralogical study of chemical weathering in the polar environment, glacial debris was sampled at the well-developed patterned ground which was formed by long periglaclal process. As fresh equivalents, recently exposed tills were sampled at the base of ice cliff of outlet glaciers and at the melting margin of ice cap together with fresh bedrock samples. Fresh tills are mostly composed of quartz, plagioclase, chlorite, and illite, but those derived from hydrothermal alteration zone contain smectite and illite-smectite. In bedrocks, chlorite was the major clay minerals in most samples with minor illite near hydrothermal alteration zone and interstratified chlorite-smectite in some samples. Smectite closely associated with eolian volcanic glass was assigned to alteration in their source region. Blocks with rough surface due to chemical disintegration showed weathering rinds of several millimeter thick. Comparision between inner fresh and outer altered zones did not show notable change in clay mineralogy except dissolution of calcite and some plagioclase. Most significant weathering was observed in the biotite flakes, eolian volcanic glass, sulfides, and carbonates in the debris. Biotite flakes derived from granodiorite were altered to hydrobiotite and vermiculite of yellow brown color. Minor epitactic kaolinite and gibbsite were formed in the cleaved flakes of weathered biotite. Pyrite was replaced by iron oxides. Calcite was congruently dissolved. Volcanic glass of basaltic andesite composition showed alteration rim of several micrometer thick or completely dissolved leaving mesh of plagioclase laths. In the alteration rim, Si, Na, Mg, and Ca were depleted, whereas Al, Ti, and Fe were relatively enriched. Mineralization of lichen and moss debris is of much interest. They are rich of A3 and Si roughly in the ratio of 2:1 to 3:1 typical of allophane. In some case, Fe and Ti are enriched in addition to Al and Si. Transmission electron microscopy of the samples rich of volcanic glass showed abundant amorphous aluminosilicates, which are interpreted as allophane. Chemical weathering in the King George Island is dominated by the leaching of primary phyllosilicates, carbonates, eolian volcanic glass, and minor sulfides. Authigenesls of clay minerals is less active. Absence of a positive evidence of significant authigenic smectite formation suggests that its contribution to the clay mineralogy of marine sediments are doubtful even near the maritime Antarctica undergoing a more rapid and intenser chemical weathering under more humid and milder climate.

  • PDF

Effect of Turbidity Changes on Tissues of Zacco koreanus (탁도 변화가 참갈겨니 (Zacco koreanus) 조직에 미치는 영향)

  • Shin, Myung-Ja;Kim, Jeong-Sook;Hwang, Yun-Hee;Lee, Jong-Eun;Seo, Eul-Won
    • Korean Journal of Ecology and Environment
    • /
    • v.41 no.1
    • /
    • pp.73-80
    • /
    • 2008
  • Present study aims to investigate the effect of muddy water on the gill and the kidney tissues of Zacco koreanus under high turbidity rearing condition. The gill of Z. koreanus showed abnormal shapes in its secondary lamellae and a rough surface with impure debris in the high level of turbidity and the longer raising period condition. In addition, the gills showed the edema, the exfoliation of epithelial cell, and the fusion of the secondary lamellae. In case of kidney tissue, the atrophied glomerulus was observed, and the empty space in Bowman's capsule was wider. The SOD activities in both gill and kidney tissues were increased in proportion to the high level of turbidity. On the while, CAT and GPX activities were shown constant level in the gill, but were increased in the kidney in the high turbid muddy water. These results indicate that the harmful radicals which generate by high level of turbidity could be removed partly by antioxidant enzymes in the kidney. The concentrations of micro heavy metal ions accumulated in the gill increased drastically at the 1,000 NTU. Based on the above results, it is considered that the exposure to the high level of turbidity for long period may affect on the structures of tissues, and change the enzymatic balance in Z. koreanus, causing the fatal disease.

Ship Stability Calculation for Cause Analysis of No. 501 Oryong Sinking Accident (제501 오룡호 침몰사고 원인분석을 위한 선박 복원성 계산)

  • Lee, Jae-Seok;Chung, Young-Gu;Kim, Jee-Hun;Park, Ji-Hoon;Lee, Sang-Gab
    • Journal of Navigation and Port Research
    • /
    • v.42 no.6
    • /
    • pp.459-468
    • /
    • 2018
  • Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sank to the bottom of the Bering Sea. The tragic accident was attributed to rough sea weather after a fishing operation in the Bering Sea, and led to the death or loss of many crewmen. In this study, the ship stability calculation was carried out using KST-SHIP (ship calculation system of KST), considering the free surface effect and fish catch arrangement according to the progress of its sinking accident, and stability after flooding was analyzed. The calculation results obtained using KST-SHIP were verified by comparing them to intact stability calculation sheet of the accident ship under the full load departure condition, and intact stability according to displacement from the departure of accident ship up to the moment of the accident was calculated and analyzed. The stability after flooding was also calculated and analyzed according to the progress during its sinking accident.

Crystallization of the NiZn ferrite nanofibers fabricated by electrospinning method (전기방사법을 이용해 제조된 NiZn ferrite 나노 섬유의 결정화)

  • Na, Kyeong-Han;Yoo, Sun-Ho;Song, Tae-Hyub;Kim, Sung-Wook;Choi, Won-Youl
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.30 no.6
    • /
    • pp.226-231
    • /
    • 2020
  • Polyvinyl pyrrolidone nanofibers including nickel, zinc, and iron precursors were fabricated via the electrospinning method. To convert as-spun nanofibers to Ni0.5Zn0.5Fe2O4 oxide nanof ibers which is capable of shielding an electromagnetic wave, heat treatment conditions were optimized. To obtain the heat treatment condition that can exclude amorphous carbon black and secondary crystal phase, samples were taken at each temperature while the calcination process and analyzed. According to the X-ray diffraction (XRD) analysis, the Ni0.5Zn0.5Fe2O4 crystal phase started to appear from 300℃, but it was confirmed through energy dispersive spectroscopy (EDS) analysis that heat treatment of 500℃ or more was required to remove most of the carbon black. When the calcination temperature exceeds 650℃, crystal nuclei starts to grow and the fiber surface condition becomes rough, so it was confirmed that the heat treatment conditions should be selectively determined according to the application field.

Lunar Exploration Employing a Quadruped Robot on the Fault of the Rupes Recta for Investigating the Geological Formation History of the Mare Nubium (4족 보행 로봇을 활용한 달의 직선절벽(Rupes Recta)의 단층면 탐사를 통한 구름의 바다(Mare Nubium) 지역의 지질학적 형성 연구)

  • Hong, Ik-Seon;Yi, Yu;Ju, Gwanghyeok
    • Journal of Space Technology and Applications
    • /
    • v.1 no.1
    • /
    • pp.64-75
    • /
    • 2021
  • On the moon as well as the earth, one of the easiest ways to understand geological formation history of any region is to observe the stratigraphy if it is available, the order in which the strata build up. By analyzing stratigraphy, it is possible to infer what geological events have occurred in the past. Mare Nubium also has an unique normal fault called Rupes Recta that shows stratigraphy. However, a rover moving with wheels is incompetent to explore the cliff since the Rupes Recta has an inclination of 10° - 30°. Therefore, a quadruped walking robot must be employed for stable expedition. To exploration a fault with a four-legged walking robot, it is necessary to design an expedition route by taking account of whether the stratigraphy is well displayed, whether the slope of the terrain is moderate, and whether there are obstacles and rough texture in the terrain based on the remote sensing data from the previous lunar missions. For the payloads required for fault surface exploration we propose an optical camera to grasp the actual appearance, a spectrometer to analyze the composition, and a drill to obtain samples that are not exposed outward.

Synthesis of Sludge Waste-derived Semiconductor Grade Uniform Colloidal Silica Nanoparticles and Their CMP Application (슬러지 폐기물을 활용한 반도체급 균일한 콜로이달 실리카 나노입자의 제조 및 CMP 응용)

  • Kim, Dong Hyun;Kim, Jiwon;Jekal, Suk;Kim, Min Jeong;Kim, Ha-Yeong;Kim, Min Sang;Kim, Sang-Chun;Park, Seon-Young;Yoon, Chang-Min
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.30 no.3
    • /
    • pp.5-12
    • /
    • 2022
  • This study suggests the effective recycling method of sludge waste from various industrial fields to synthesize uniform colloidal silica nanoparticles. In detail, polymers are removed from the sludge waste to attain sludge-extracted silica (s-SiO2) micron-sized particles, and ammonia assisted sonication is applied to s-SiO2, which has effectively extracted the silanol precursor. The nano-sized silica (n-SiO2) particles are successfully synthesized by a typical sol-gel method using silanol precursor. Also, the yield amounts of n-SiO2 are determined by the function of s-SiO2 etching time. Finally, n-SiO2-based slurry is synthesized for the practical CMP application. As a result, rough-surfaced semiconductor chip is successfully polished by the n-SiO2-based slurry to exhibit the mirror-like clean surface. In this regard, sludge wastes are successfully prepared as valuable semicondutor grade materials.

Numerical Analyses on the Behavioral Characteristics of Side of Drilled Shafts in Rocks and Suggestion of Design Charts (수치해석을 통한 암반에 근입된 현장타설말뚝의 주면부 거동특성 분석 및 설계차트 제시)

  • Lee, Hyuk-Jin;Kim, Hong-Taek
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.26 no.6C
    • /
    • pp.407-419
    • /
    • 2006
  • Situations where support is provided solely in shaft resistance of drilled shafts are where the base of the drilled hole cannot be cleaned so that it is uncertain that any end bearing support will be developed. Alternatively, where sound bed rock underlies low strength overburden material, it may be possible to achieve the required support in end bearing on the rock only, and assume that no support is developed in the overburden. However, where the drilled shaft is drilled some depth into sound rock, a combination of side wall resistance and end bearing can be assumed. Both theoretical and field studies of the performance of rock socketed drilled shafts show that the major portion of applied load is usually carried in side wall resistance. Normal stress at the rock-concrete interface is induced by two mechanisms. First, application of a compressive load on the top of the pile results in elastic dilation of the concrete, and second, shear displacement at the rough surface of the drilled hole results in mechanical dilation of the interface. If the stiffness of the material surrounding the socket with respect to normal displacement is constant, then the normal stress will increase with increasing applied load, and there will be a corresponding increase in the shear strength. In this study, the numerical analyses are carried out to investigate the behavioral characteristics of side of rock socketed drilled shafts. The cause of non-linear head load-settlement relationship and failure mechanism at side are also investigated properly and the design charts are suggested and verified for the leading to greater efficiency and reliability in the pile design.

Isolation and Mycelial Cultivation Submerged of Phellinus sp. (Phellinus sp.의 분리 및 균사체의 액체배양)

  • Kang, Tae-Su;Lee, Dong-Gi;Lee, Shin-Young
    • The Korean Journal of Mycology
    • /
    • v.25 no.4 s.83
    • /
    • pp.257-267
    • /
    • 1997
  • Fruit bodies similar to the Phellinus sp. residing on the mulberry were collected at Yang-yang in Kang-won-do province and one strain of Phellinus sp. was isolated from the fruit bodies. For mass production of the isolated mycelia in a submerged culture, the culture conditions, medium composition, and the effect of various culture systems on the mycelial growth, were investigated. The morphological characteristics of the fruit body were as follows: covered with blackish to black and rough, lower surface with yellowish-brown to dull-brown and smooth, 5-7 cm thick and hard woody. Also, the pure cultured mycelia showed yellowish-brown color, capability of purplish-brown pigment production on the PDA plate media, no-formation of clamp-connection, much binding branch, and enzyme activities such as laccase, tyrosinase and peroxidase. Therefore, pure cultured strain was identified to be Phellinus sp. In the flask culture, the optimum culture conditions for the mycelial production were obtained after cultivation of 8 days at inoculum level of 5%(v/v), media volume of 70 mL, 150 rpm, initial pH 6, and temperature of $30^{\circ}C$. Optimum medium composition from the response surface analysis were determined to be glucose 12.12 g/L, sucrose 12.12 g/L, yeast extract 11.15 g/L, malt extract 11.15 g/L, $KH_2PO_4$ 0.855 g/L and $CaCl_2$ 0.855 g/L. The production of the mycelia after 4 and 8 days of cultivation was 1.95 and 9.89 g/L, respectively. The maximum specific growth rate and productivity were $0.020\;hr^{-1}$ and 1.25 g/L/day, respectively. Among the three different culture systems for the growth of mycelia, the maximum mycelial dry weight of 7.5 g/L was obtained after cultivation of 4 days in the air-lift fermentor under aeration rate of 2.5 vvm. The maximum specific growth rate and productivity were $0.033\;hr^{-1}$ and 1.9 g/L/day, respectively, which were about 1.7 and 4.2 times higher than those of flask culture.

  • PDF

Occurrence of Stink Bugs and Pecky Rice Damage by Stink Bugs in Paddy Fields in Gyeonggi-do, Korea (경기도 벼 재배지 노린재류의 발생소장과 벼 반점미 피해)

  • Lee, Jin-Gu;Hong, Soon-Sung;Kim, Jin-Young;Park, Kyeong-Yeol;Lim, Jae-Wook;Lee, Joon-Ho
    • Korean journal of applied entomology
    • /
    • v.48 no.1
    • /
    • pp.37-44
    • /
    • 2009
  • This study was carried out to survey the occurrence of stink bugs and pecky rice grain caused by the stink bugs in paddy fields in six districts of Gyeonggi-do. In the levee of the paddy fields, 30 species of the stink bugs were collected, and the dominant species were Paromius exiguus in Hwaseong and Siheung, and Stenotus rubrovittatus in Pyeongtaek, Icheon and Paju. In the paddy fields, 23 species were collected, and the dominant species were Paromius exiguus in Siheung, and Stenotus rubrovittatus in Pyeongtaek, Icheon and Paju. P. exiguus overwintered and proliferated mainly in the west coastal region, where its host plants, Imperata cylindrica and Calamagrostis epigeois, were abundant, and then moved to paddy fields later in the season, resulting in the peak density in September in paddy area. Stenotus rubrovittatus and Cletus punctiger were abundant in paddy area in August and September, and Eysarcoris aeneus was abundant in June and July. When the stink bugs were inoculated on the rice, the rate of pecky rice caused by E. aeneus and P. exiguus at milk ripe stage was 10.2% and 4.8%, respectively, and the rate by S. rubrovittatus and P. exiguus at dough ripe stage was 4.3% and 2.7%, respectively. The damage shape of pecky rice was distinctive according to the species. The surface of pecky rice by P. exiguus was very smooth but the surface of pecky rice by E. aeneus was rough and caved. In the pecky rice by S. rubrovittatus, the spot occurred at the topside of the grain.

Ultrastructural Changes Induced by Telluric Acid in the Rat Liver (Telluric Acid가 흰쥐 간조직의 미세구조에 미치는 영향)

  • Son, Serk-Joo;Jeong, Young-Gil;Cho, Seung-Muk;Baik, Tai-Kyung;Choi, Chang-Do;Choi, Wol-Bong
    • Applied Microscopy
    • /
    • v.25 no.4
    • /
    • pp.83-103
    • /
    • 1995
  • This experiment was carried out to investigate the effects of telluric acid on the histological and fine structural changes in the rat liver. Fischer 344 rats($150{\sim}200gm$) were used in this study as control and experimental groups. Telluric acid(5 mg/100 gm of body weight) suspensed in olive oil was given intraperitoneally to the animals of the experimental group and only olive oil to those of the control group. At the intervals of 3, 6 and 12 hours, 1, 2, 3, 5, 10, 20, 30 and 60 days after administration, the animals were sacrificed, and livers were obtained from the rats. For light microscopic examination of the liver, sections($5{\mu}m$) were stained with hematoxylineosin(H-E). For electron microscopic examination of the liver, sections were stained with uranyl acetate and lead citrate, finally examined with Zeiss EM 109 electron microscopes. The results obtained were as follows. 1. In the control group, round nucleus. well developed mitochondria, Golgi apparatus, rough endoplasmic reticulum(RER) and numerous glycogen particles were observed in the cytoplasm of the hepatocyte. In the cytoplasmic membranes of the hepatocyte, sinusoidal surface had numerous microvilli and cellular surface is combinated adjacent hepatocyte with desmosomes. The RER cisterns were dilated and zymogen granules were fewer than those of the dark cells. Kupffer cells with irregular nuclear membrane were observed. Fat storing cell and collagenous fiber bundle were observed in the Disse space. 2. Kupffer cell, inflammatory cells in the connective tissue of hepatic triad and lysosome were increased in the 3, 6, and 12 hour experimental group comparing with that of the control group. 3. In the 1 day experimental group, infiltration of inflammatory cells in interlobular connective tissue, dilatation of sinusoidal capillary and increasing of Kupffer cell were observed. Atropic change of hepatocyte and aggregation of glycogen particles in the cytoplasm of hepatocyte were observed. In this group, desmosome near bile canaliculi and collagenous fiber bundle in the Disse space were increased comparing with that of the 12 hours experimental group. In the 2 days experimental group, desmosome, lysosome, peroxisome and collagenous fiber bundle were increased comparing with that of the 1 day experimental group. Furthermore, lamellated bodies were also seen in the cytoplasm of the hepatocyte. 4. In 3 and 5 days experimental groups, transformations of hepatic cell cord and degeneration of the hepatocyte were markedly inclosed comparing with the all experimental groups. And damaged RER and mitochondria. collagenous fiber bundle were also inclosed comparing with that of the 2 days experimental group. Autophagosome and fat storing cells with large lipid droplets were also observed comparing with that of the 2 days experimental group. Tight junction and desmosome between the hepatocytes were separated. These degenerating changes were severe through the all experimental groups. 5. In the 10 and 20 days experimental groups, arrangement of hepatic cell cords and cell organelles of hepatocytes were similar to those of the control group. However, aggregation of glycogen particles, dilatation of sinusoidal capillary and infiltration of inflammatory cells remained. 6. In the 30 days experimental group, the tissue findings were similar to those of the control grout. But lamellated bodies in some hepatocytes and lysosome were remained in the cytoplasms of the Kupffer cells. In the 60 days experimental group, these all changes were recovered as the control group. In conclusion, telluric acid would directly induce the degenerative and necrotic changes on the hepatic tissue. However, these changes were perfectly recoverd in the 60 days experimental group as the control group.

  • PDF