• 한국농촌생활과학회지
• /
• 제8권2호
• /
• pp.119-124
• /
• 1997

In this study we tried to give a decision on propriety of working conditions, to present ideas on reducing work loads, and to grope for efficiency of agricultural works. For this we examined the actual working conditions of cultivating welsh onion in the summer ground. And we improved harmful factors that affect farmer's health by considering results of previous study and farmer's subjective sensation. And we measured. compared, and analyzed the farmer's work loads before and after improvement. The results of this study are as follows ; 1. According to examine the actual working conditions of cultivating welsh onion in the summer ground, farmers have experienced physical and mental chronic fatigue on the basis of farmer's appel to eye - fatigue and sun - burned skin on hot working environment including excessive ultraviolet rays, the rough ground condition, inconsistent arrangement of working stand and sorter, heavy - weared habits, and unsuitable working posture. 2. When we improved harmful factors that affect farmer's health, conformed the effects on important work efficiency index such as heart rate, electromyovolume, body temperature, and microclimate inside clothing and work loads were decreased by eliminating the hillock and obstacles of ground, decreasing the clothing weight, using proper clothing appliances such as hat and sunglasses, controlling height of working stand and sorter suitably, improving the working postures and methods as using assistant appliances, alloting the working time and sequence effectively and presenting the light gymnastic exercises and rest for fatigue restoration.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.20-27
• /
• 2009

The characteristics of titanium alloy as a relatively advanced material is low density, avirulent and, superior corrosive resistant, therefore the use of titanium alloy is increasing lately in aerospace and mechanical technologies, precision machinery, electronics industry, petro-chemical industries and biomedical areas. In these days, the titanium alloy product is required various surface qualities of not only smooth surface but also rough surface depending on usages. The purpose of this experimental research is to find the optimum surface roughness of titanium alloy of Ti-6Al-4V, by micro abrasive blasting as depending variable conditions of working pressure, nozzle size, working time, stand of distance and power particle size.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.69-74
• /
• 1999

This paper aims to DNC application of car seat cushion die. DNC systems are consist of CAD(CATIA1, CAM(Z-MASTER, OMEGA) software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

• Journal of Biosystems Engineering
• /
• 제38권1호
• /
• pp.18-24
• /
• 2013

Purpose: This study was conducted to develop an optimal combine scheduling program using Max-Coverage algorithm which derives the maximum efficiency for a specific location in harvest seasons. Methods: The combine scheduling program was operated with information about combine specification and farmland. Four operating types (Max-Coverage algorithm type, Boustrophedon path type, max quality value type, and max area type) were selected to compare quality and working capacity. Result: The working time of Max-Coverage algorithm type was shorter than others, and the total quality value of Max-Coverage algorithm and max quality value type were higher than others. Conclusion: The developed combine scheduling program using Max-Coverage algorithm will provide optimal operation and maximum quality in a limited area and time.

• Journal of Biosystems Engineering
• /
• 제27권5호
• /
• pp.433-450
• /
• 2002

The daily food intake for dairy cows has to be effectively controlled to breed a sound group of cows as well as to enhance the productivity of the cows. But, feed stuffs are fed in the common bulk for a group of cows in most cases despite that the individual food intake has to be varied. To obtain the feed for each cow, both the nutrient requirements and the nutrient composition of fred have to be provided in advance, which are based on the status of cows such as weigh marginal weight amount of milk, fat concentration in milk, growth and milking stages, and rough feed ratio, etc. Then, the mixed ration fur diet would be computed by the nutrient requirements constraints. However, when TMR (Total Mixed Ration) is conventionally supplied for a group of cows, it is almost impossible to get an optimal feed mixed ration meeting the nutrient requirements of each individual cow since the constraints are usually conflicting and over-constrained although they are linear. Hence, addressed in this paper is a simulated annealing (SA) technique to find the food intake for dairy cows, considering the characteristics of individual or grouped cows. Appropriate parameters fur the successful working of SA are determined through preliminary experiments. The parameters include initial temperature, epoch length. cooling scheduling, and stopping criteria. In addition, a neighborhood solution generation method for the effective improvement of solutions is presented. Experimental results show that the final solution for the mixture of feed fits the rough feed ratio and some other nutrient requirements such as rough fiber, acid detergent fiber, and neutral detergent fiber, with 100 percent, while fulfilling net energy for lactating, metabolic energy, total digestible nutrients, crude protein, and undegraded intake protein within average five percent.

• Mass Spectrometry Letters
• /
• 제11권2호
• /
• pp.36-40
• /
• 2020

Untargeted metabolomics is a useful tool for drug development focusing on novel chemotherapeutic and chemopreventative agents against cancer cells. In recent years, quadrupole time of flight liquid chromatography-mass spectrometry (Q-TOF LC/MS)-based untargeted metabolomic approaches have gained importance to evaluate the effect of these agents at the molecular level. The researchers working on cell culture studies still do not apply standardized methodologies on sample preparation for untargeted metabolomics approaches. In this study, the rough and wet lysis techniques performed on MCF-7 breast cancer cells were compared with each other via the Q-TOF LC/MS-based metabolomic approach. The C18 and hydrophilic interaction liquid chromatography (HILIC) columns were used for the separation of the metabolites in MCF-7 cell lysates. 505 peaks were detected through the HILIC column and 551 peaks were found through the C18 column for the wet lysis technique. This situation supported by the base peak chromatograms showed that the wet lysis technique allowed us to extract higher number of non-polar metabolites. Almost equal number of metabolites was found for the C18 and HILIC columns (697 peaks for the HILIC column and 695 peaks for the C18 column) when the rough lysis technique was used. However, the intensities of polar metabolites were higher for the rough lysis technique on base peak chromatograms for both the HILIC and C18 columns. Although cell lysis technique, which is the first step in the sample preparation for cell culture studies, does not cause dramatic differences in the number of the detected metabolite peaks, it affects the polar and non-polar metabolite ratio significantly. Therefore, it must be considered carefully especially for in vitro drug development studies.

• 한국해양공학회지
• /
• 제34권3호
• /
• pp.217-226
• /
• 2020

An offshore plant is an offshore platform that can process oil and gas resources in rough seas with a poor working environment. Moreover, it is a complex structure with different types of offshore facilities and a large amount of outfitting that connects different offshore installations. In particular, an enormous amount of various piping materials is installed in a relatively narrow space, and thus, the difficulty of working is relatively high compared to working in ships or ground plants. Generally, when the 3D detailed design is completed, an offshore plant piping process is carried out at the shipyard with ISO 2D fabrication drawings and ISO 2D installation drawings. If a worker wants to understand the three-dimensional piping composition in the working area, he can only use three-dimensional viewers that provide limited functionality. As offshore plant construction progresses, correlating work with predecessors becomes more complicated and rework occurs because of frequent design changes. This viewer function makes it difficult to identify the 3D piping structure of the urgently needed part. This study deals with the process support method based on a system using a 3D simulator to improve the efficiency of the piping process. The 3D simulator is based on the Unity3D engine and can be simulated by considering the classification and priority of 3D models by the piping process in the system. Further, it makes it possible to visualize progress information of the process. In addition, the punch content can be displayed on the 3D model after the pipe inspection. Finally, in supporting the data in relation to the piping process, it is considered that 3D-simulator-supported piping installing could improve the work efficiency by more than 99% compared to the existing method.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.227-236
• /
• 2018

As consciousness of safety becomes an important social issue, the demand for protective clothing is increasing. Conventional flame-retardant cotton working wear has low durability, and working wear with m-aramid fibers are stiff, heavy, less permeable, and expensive. In this study, recycled m-aramid and cotton have been blended to produce woven fabric of different compositions to enhance high performance and comfort to solve aforementioned problems. The fabrics were analyzed according to constituents and various structural factors. Mechanical properties were measured using KES-FB system. The measured thermal properties are TGA, $Q_{max}$, TPP and RPP. Fabric with polyurethane yarn covered by m-aramid/cotton spun yarn is observed to have good wearability. The fabric of open end spun yarn showed more stiffness than that of ring spun yarn. The sample with the high count of yarn has more smooth surface. In addition, high m-aramid content fabric is considered to have relatively high stiffness when using as clothing. In TGA the fabric with higher m-aramid content showed more stable decomposition behavior. The fabric having rough surface showed lower heat transfer properties in $Q_{max}$. The influence of the fabric thickness was important in convection and radiant heat test.

• 한국산림과학회지
• /
• 제109권2호
• /
• pp.195-201
• /
• 2020

산림작업은 비정형화된 작업 환경(날씨, 지형)에서 신체의 반복적인 동작 등으로 인하여 근골격계 질환에 취약하다. 특히, 조림목의 원활한 생장을 위해 실행하는 풀베기와 칡덩굴제거 작업은 여전히 많은 인력이 투입되고 있으며, 이 작업자세에 대한 인간공학적 평가가 필요하다. 따라서 본 연구에서는 OWAS (Ovako Working Posture Analysis System) 분석방법을 이용하여 예초기를 이용한 풀베기 작업과 낫·손톱을 이용한 칡덩굴제거 작업의 신체부담을 정량적으로 평가하였다. 또한 작업자세 위험도 지수(Postural risk index: PRI)를 통하여 산림작업의 위험 정도를 분석하였다. 풀베기와 칡덩굴제거 작업원에 대한 작업자세를 분석한 결과, 칡덩굴제거작업의 작업자세 위험성이 풀베기작업에 비해 통계적으로 더 높은 수준을 보였다. 칡덩굴을 제거하는 작업 과정 중에서 다리에서는 두 다리를 구부리는 자세와 무릎 꿇는 자세의 비율이 높게 나타나기 때문에 근골격계에 부정적 영향을 미치는 것으로 판단된다. 이 연구결과는 풀베기와 칡덩굴제거 작업원의 작업부하 및 근골격계 질환을 저감하는 기초자료로 활용될 수 있을 것으로 기대된다.

• 전자공학회논문지S
• /
• 제36S권7호
• /
• pp.62-70
• /
• 1999

통상적으로 삼단 적층 테이블은 수 cm에서 수십 cm까지 이송하는 작업영역에 주로 사용되나 작업영역에서 비해 차지하는 공간이 큰 단점이 있다. 최근에는 산업현장에서 테이블이 단소 경박하면서 작업영역이 $5mm{\times}5mm$이내이고 위치제어 정밀도가 최소 ${\pm}4{\mu}m$정도의 고정밀 위치제어용 테이블이 요구되고 있다. 본 논문은 이런 요구에 부응하여 고정밀 위치제어용 병렬 $XY{\theta}$테이블을 설계 제작하며 고정밀 위치제어를 위해 새로운 전동 리니어 액추에이터와 화상처리 알고리즘을 제안한다. $XY{\theta}$의 자유도를 갖도록 테이블 베드의 단일 평면상에 액추에이터를 수평방향으로 한 개 수직방향으로 두 개를 설치한다. 두 대의 CCD 카메라를 이용한 화상처리 알고리즘은 테이블 위에 놓인 패널을 목표 지점으로 고정밀 위치제어를 수행한다. 제작된 테이블로 상기의 작업영역과 위치제어 정밀도를 충족시켜 주는 실험 결과를 얻을 수 있었다.