• Journal of the Korean Society of Radiology
• /
• v.11 no.1
• /
• pp.63-68
• /
• 2017

To reduce the exposure dose in head CT, the use of low tube voltage is required. However, increasing noise may cause errors in the second data processing. In this study, we proposed a method to reduce noise by using low tube voltage. Experimental results show that the noise level is high at 100kVp and lowest at 140 kVp. The dose was lower at 100 kVp and higher at 140 kVp. As a result of applying the wavelet according to the threshold value, the noise value in the wavelet Th30 decreased to 4.51. Using the parameter condition(100 kVp, rotation time 0.5 sec, dose: 40.64 mGy) and the wavelet Th 30, the dose reduction of 65.3% was possible. We believe that applying the proposed method to head CT images will help to patient safety and interpret accurate information.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1489-1495
• /
• 2012

In this study, we perform the structural analysis of a floating offshore wind turbine tower by considering the dynamic response of the floating platform. A multibody system consisting of three blades, a hub, a nacelle, the platform, and the tower is used to model the floating wind turbine. The blades and the tower are modeled as flexible bodies using three-dimensional beam elements. The aerodynamic force on the blades is calculated by the Blade Element Momentum (BEM) theory with hub rotation. The hydrostatic, hydrodynamic, and mooring forces are considered for the platform. The structural dynamic responses of the tower are simulated by numerically solving the equations of motion. From the simulation results, the time history of the internal forces at the nodes, such as the bending moment and stress, are obtained. In conclusion, the internal forces are compared with those obtained from static analysis to assess the effects of wave loads on the structural stability of the tower.

• Journal of Fashion Business
• /
• v.21 no.5
• /
• pp.43-60
• /
• 2017

The purpose of this study is to conduct an in-depth examination into the cause of stress as well as reasons for turnover relative to fashion industry workers in their 20s-30s, thereby seeking effective improvement methods to reduce turnover. The study method consisted of one-on-one in-depth interviews to collect data on 15 fashion industry workers. Results were as follow. First, causes of stress for fashion industry workers in their 20s-30s include work related factors, interpersonal relations, and organizational culture, while the most frequently mentioned reasons for turnover were concerns about career track and aptitude as well as annual salary, revealing that self-improvement related growth potential is the most significant factor for turnover. Second, it was not one stress factor that influenced turnover but a composite of several stress factors that motivated individuals to change jobs. Last, time flexibility, self-esteem, and development potential were critical factors for turnover. Self-esteem and development potential that provide a sense of acknowledgment were especially emphasized as the most significant, revealing that the younger generation considers personal happiness to be critical and the more this aspect is not treated adequately the more the odds of choosing turnover. To mitigate this issue, an in-house educational system for self-development and an assignment rotation system must be adopted for workers to change to positions that fit their aptitude.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1211-1222
• /
• 2011

It is necessary to use prestressed modal analysis to calculate the modal frequencies and mode shapes of a prestressed structure such as a spinning blade, a preloaded structure, or a thermally deformed pipe, because the prestress effect sometimes causes significant changes in the frequencies and mode shapes. When the finite element model under consideration has a very large number of degrees of freedom, repeated prestressed modal analyses for investigating the prestress effects might become too computationally expensive to finish within a reasonable design-process time. To alleviate these computational difficulties, a Krylov subspace-based model order reduction, which reduces the number of degrees of freedom of the original finite element model and speeds up the necessary prestressed modal analysis with the reduced order models (ROMs), is presented. The numerical process for the moment-matching model reduction is performed directly on the full order models (FOMs) (modeled in ANSYS) by the Arnoldi process. To demonstrate the advantages of this approach for performing prestressed modal analysis, the prestressed wheel and the compressor impeller under their high-speed rotation are considered as examples.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.803-808
• /
• 2006

This paper was a study about noise reduction through flow stabilization in duel using experimental method and numerical analysis at the same time. To determine the fan's type three kinds of fans(axial fan, centrifugal fan, and axial fan with centrifugal type) was examined to investigate the suitability for duct. As a result, under the equal number of rotation 2000 RPM, performance of an axial fan with centrifugal type was the most superior by 55dBA at 4.3CMM among other fans. After this, analyzed the results of the numerical analysis to find out the optimum design of pitch angle such as $0^{\circ},\;10^{\circ},\;15^{\circ}\;and\;20^{\circ}$. The intensity of turbulence was low when pitch angle was $15^{\circ}$ and air volume became peak by 5.08 CMM. It was observed that axis component of velocity increased gradually when pitch angle increased from $0^{\circ}\;to\;20^{\circ}$. Finally, designed the shapes of D/S(Down Stream) in duct that agreed inlet angle($\delta$) of stationary blades with pitch angle($\beta$) of axial fan with centrifugal type and derived flow to duct medial, and changed the shape of motor-mount to reduce occurance of unstable vortex in tip of impeller, and embodied noise reduction and improvement of air flow rate through flow stabilization.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.8
• /
• pp.65-74
• /
• 2005

It is required for getting the ring laser gyro output purely related to the input rotation to eliminate the output of the modulated angular vibration from the ring laser signal. In this paper we discuss the dither stripping methods of compensating the ring laser signal by converting the rate signal of dither detector from voltage to frequency for a dither type ring laser gyro. We discuss the differential methods for getting rid of the offset of the V-F signal. And we develope the methods of compensating the phase differences between the ring laser signals and the V-F differential signals by using analog integrator and digital time delays. And also, we develope the gain calculation method by comparing the standard deviations of the ring laser signals with V-F differential signals. We implemented these methods and analyzed the effectiveness of these methods by comparing the dither trapping methods.

• Clinics in Shoulder and Elbow
• /
• v.20 no.1
• /
• pp.3-9
• /
• 2017

Background: Many hyaluronic acid (HA)-based anti-adhesive agents have been commercialized for clinical use in the pharmaceutical market. But their efficacy in arthroscopic rotator cuff repairs remains elusive. To determine their efficacy, we performed a comparative analysis of the effects of two hyaluronate/carboxymethylcellulose (CMC)-based anti-adhesive agents, Protescal and Guardix. Methods: We recruited a total of 256 patients who had received an arthroscopic rotator cuff repair at our hospital between January 2014 and March 2015. Among them, 96 patients fulfilled the study's selection criteria and were enrolled as the final population sample. Thirty patients who had received a postoperative injection of Protescal were allocated into Group A. Another 30 patients who had received a postoperative injection of Guardix were allocated into Group B. As controls, 36 patients who did not receive any injection were allocated into Group C. The patients included in this study were aged between 19 and 75 years. For the clinical assessment, we measured the following clinical parameters-the visual analogue scale for pain (PVAS), the American Shoulder and Elbow Surgeons (ASES) score, and the constant score, as well as passive range of motions (ROMs)-at three time-points (preoperatively, 2-month postoperatively, and 6-month postoperatively). Results: We found that Group A compared to Group B tended to show a swifter recovery in passive anterior elevation and in internal rotation by the 2-month postoperative follow-up, but the differences were not statistically significant. Conclusions: We found that the effects of HA/CMC-based injections were minimal after arthroscopic rotator cuff repairs.

• Journal of Fashion Business
• /
• v.13 no.2
• /
• pp.78-86
• /
• 2009

When scouring and contraction finishing at $90^{\circ}C$ using Relaxer or Rotary Washer contraction and weight loss ratio in warp and weft directions were excellent. Also surface state of fabric after drying or sanding treatment was excellent without crease. Low melting polyester fabric showed a complete melting bond by heat setting(P/S) at above $160^{\circ}C$. The alkali hydrolysis reaction of polyester showed the breakpoint in the weight loss behavior test, polyester yarn showed a breakpoint ranging from 25% to 28%. This is due to the difference of the hydrolysis rate between regular polyester and soluble polyester. Initially the soluble polyester was eluted and micro-fibrillized 5 times faster than a regular polyester. At a later time, a regular polyester was reduced weight to impart a proper flexibility and drape property to the fabric. As a result of surface sanding finishing, the surface of interior fabric showed a surface state most stabilized when using Mesh No. 220 in mono 0.2d after elution finishing. When the rotation direction of sanding roller was pro-, pro-, pro-, and retro-direction, a directional effect of tuft was not shown, a writing effect as suede was exhibited and a surface state was even. Sublimation fastness was 3-4 class for polyester and 2-4 class for nylon. Light fastness 3-4 class after lapse of 100 hours and 2-4 class after lapse of 160 hours. Abrasion fastness was 3-4 class on wet and 4-5 class on dry Laundry fastness was 2-4 class. As such, the abrasion fastness is slightly reduced upon wetting and the use thereof for interior is excellent, whereas laundry fastness is slightly lowered.

• Journal of Internet Computing and Services
• /
• v.10 no.5
• /
• pp.117-125
• /
• 2009

Early in 21st century, researches about intelligent service robot that provide various services for a human out of the industrial robot only has simple pattern repetition. It concentrates in the research regarding the URC(Ubiquitous Robotic Companion) robot which connects the network in the intelligent service. This paper proposes the robot system based on network to guide a way. The robot has made by lego brick and used ultrasonic sensor, rotation sensor and RFID tag to recognize external environment. Also, it includes a PDA to process the data between robot and server. The network server transmits information to robot controller by bluetooth and it controls the course movement and evasion of the robot. In this research, the robot system based on network to guide a way is easy to expand service and is able to process a data in real time due to data processing in the server as a part of intelligent robot. And it can reduce the cost to build a robot thank to use cheaper sensor equipment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3066-3073
• /
• 2009

Joint paths of master and branch pipes are induced mathematically for many kinds of joint patterns between both pipes in 3-axis pipe profile-cutting machines. By compensating them with a kerf width, the real cutting paths are determined, and their CL-data are generated, and the tool paths generated by CL-data are verified by a ghost function. A bevelling of welds is implemented through tilting a cutting torch in the $\beta$-axis direction for 8 sections in the chuck rotation of $\alpha$-axis. A PLC controls simultaneously position and velocity in a real time for $\alpha$, X, $\beta$-axis by loading CL-data generated. We developed the PLC-controlled 3-axis pipe profile-cutting system which can cut a master or branch pipe along the cutting path and simultaneously do a bevelling process.