• Journal of TMJ Balancing Medicine
• /
• v.6 no.1
• /
• pp.1-4
• /
• 2016

We investigated the potential of electromyography (EMG) for diagnosing imbalance in the temporomandibular joint (TMJ) to apply functional cerebrospinal therapy (FCST). The electromyography signals were measured in the sternocleidomastoid muscle (SCM) in patients with temporomandibular disorder (TMD) while a FCST specialist conducted a restricted cervical rotation test. In addition, we also observed the changes in the electromyography signals according to pre-treatment or treatment with a TMJ balancing appliance (TBA), a customized TMJ balancing appliance (CBA), or a CBA with one paper bar. The right SCMs of the two patients with right TMJ imbalance had high EMG signals in the right cervical rotation test, while the left SCMs showed low EMG signals in the left rotation. In addition, the high EMG signals in the right SCMs decreased when using the TBA or the CBA, but the EMG signals of the left SCMs showed low EMG values during the treatments. Furthermore, the EMG signals of the right SCMs rose again after artificial imbalance of the right TMJ by the CBA with one paper bar. This case report demonstrated the potential of EMG as an objective diagnostic method for FCST.

• Geomechanics and Engineering
• /
• v.23 no.6
• /
• pp.523-533
• /
• 2020

The current study focuses on the effect of the end shape of steel pipe piles on installation effort and bearing resistance using the pressing method of installation under dense ground conditions. The effect of pile rotation on the installation effort and bearing resistance is also investigated. The model steel piles with a flat end, cone end and cutting-edge end were used in this study. The test results indicated that cone end pile with the pressing method of installation required the least installation effort (load) and showed higher ultimate resistance than flat and cutting-edge end piles. However, pressing and rotation during cutting-edge end pile installation considerably reduces the installation effort (load and torque) if pile penetration in one rotation equal to the cutting-edge depth. Inclusion of rotation during pile installation reduces the ultimate bearing resistance. However, if penetration of the cutting-edge end pile equal to the cutting-edge depth in one rotation, the reduction in ultimate resistance can be minimized. In comparing the cone and cutting-edge end piles installed with pressing and rotation, the least installation effort is observed in the cutting-edge end pile installed with penetration rate equal to the cutting-edge depth per rotation.

• Tribology and Lubricants
• /
• v.14 no.3
• /
• pp.81-86
• /
• 1998

The purpose of this paper is to measure the rotational speed of tappet in OHC valve train system. Tappet has eccentricity about cam center, which induces the tappet rotation and prevents from wear. In this paper, the experimental test rig which composes of one cam system is developed to measure the tappet rotation by using the laser generating system, rotary encoder, optical fiber, and photo transistor. The direction of tappet rotation is judged from the oder of optical signal. As results of experiment, average and instant rotational speed and average rotation angle per one cam revolution are presented. Measured results show that eccentricity ratio is dominant factor for the tappet rotation, and tappet is rotated at the base circle.

• The Journal of Korean Physical Therapy
• /
• v.12 no.2
• /
• pp.95-105
• /
• 2000

Glenohumeral internal and external rotation with shoulder abducted in the frontal plane often causes impingement of the supraspinatus tendon. whereas similar activity in scapular plane does not cause impingement. The Purpose of this study was to determine if assessment among the three positions as 30 degrees, 60 degrees, 90 degrees abduction in the sitting position of the scapular plane could be affected the comparison between intemal and external peak torque, total work, average power. In this study, Isokinetic shoulder rotational strength was evaluated in twenty healthy male university students, using the Cybex NORMTM System (CYBEX Division of LUMEX, Inc., Ronkonkoma, New York). Test data was gathered in the plane of the scapular, 30 degrees of horizontal flexion anterior to coronal plane, and the subjects performed the test with the arm 30, 60, and 90degrees abducted in the sitting position. also, test speed was set at deg/sec. Statistical analysis was performed using SPSS 7.5 for Windows software and mean and standard deviations were calculated. ANOVA was used to analyze the difference of the values in the three test positions. A paired t-test was used of examining the difference in the means peak torque between external and internal rotation. Not any significant difference was found among three abduction positions in scapular plane, even though there was a consistent pattern of greater strength in the abducted position of 60 degrees. Internal relation strength peak torque and total work were greater than those of external rotation in every test positions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.313-323
• /
• 2018

This study was conducted to develop an individualized upper extremity exercise program for patients after mastectomy and evaluate its effectiveness. A nonequivalent control-group pretest-posttest design was used for this investigation. Research participants were patients with breast cancer who underwent mastectomy at two university hospitals (experimental group, n=17; control group, n=16). The experimental group received an individualized upper extremity exercise program three times a week for 7 weeks. Data were analyzed by the ${\chi}^2-test$, Fisher's exact test, Mann-Whitney U-test and Wilcoxon Signed Rank test using SPSS WIN 21.0. Inter-group comparison revealed significant differences between pre-test and post-test in hands behind the back, flexion, abduction, external rotation, internal rotation, and grip strength. Moreover, the experimental group showed significant improvements in hands behind the back, flexion, abduction, external rotation, internal rotation, and grip strength relative to the control. In conclusion, the individualized upper extremity exercise program was shown to be an effective intervention to improve physical functions in upper limbs and shoulders. Therefore, this program should be applied to patients after mastectomy in clinics since many patients have suffered from decreased physical functions in upper extremities.

• Steel and Composite Structures
• /
• v.22 no.1
• /
• pp.141-159
• /
• 2016

Commonly in steel frames, steel beam and concrete slab are connected together by shear keys to work as a unit member which is called composite beam. When a composite beam is subjected to positive bending, flexural strength and stiffness of the beam can be increased due to "composite action". At the same time despite these advantages, composite action increases the strain at the beam bottom flange and it might affect beam plastic rotation capacity. This paper presents results of study on the rotation capacity of composite beam connected to Rectangular Hollow Section (RHS) column in the steel moment resisting frame buildings. Due to out-of-plane deformation of column flange, moment transfer efficiency of web connection is reduced and this results in reduction of beam plastic rotation capacity. In order to investigate the effects of width-to-thickness ratio (B/t) of RHS column on the rotation capacity of composite beam, cyclic loading tests were conducted on three full scale beam-to-column subassemblies. Detailed study on the different steel beam damages and concrete slab damages are presented. Experimental data showed the importance of this parameter of RHS column on the seismic behavior of composite beams. It is found that occurrence of severe concrete bearing crush at the face of RHS column of specimen with smaller width-to-thickness ratio resulted in considerable reduction on the rate of strain increase in the bottom flange. This behavior resulted in considerable improvement of rotation capacity of this specimen compared with composite and even bare steel beam connected to the RHS column with larger width-to-thickness ratio.

• Physical Therapy Korea
• /
• v.19 no.4
• /
• pp.46-54
• /
• 2012

Ely's test is commonly used to assess rectus femoris muscle flexibility. however, a reliability limit of this test was demonstrated by a previous study. In this study, we present an alternative method using an application for a digital horizontal level in a smartphone (DHLS) to complement the reliability limit of Ely's test. The aim of this study was to examine the reliability of Ely's test using DHLS on the pelvis, compared to using visual observation (VO) of pelvic and hip motions. Nineteen patients with lumbar extension-rotation syndrome were recruited for this study. An examiner examined the rectus femoris flexibility (both pass/fail and goniometer scoring) through Ely's test using both DHLS and VO. A retest session was completed two hours later for within-day reliability and seven days later for between-day intra-rater test-retest reliability. Results showed higher Kappa values for pass/fail scoring and higher intraclass correlation coefficient values for goniometer scoring in Ely's test using DHLS, compared to using VO. Measurement error and Bland and Altman plots further demonstrated the degree of intra-rater variance during Ely's test using DHLS in a clinical setting, compared to using VO. These results demonstrated that Ely's test using DHLS showed acceptable reliability compared to using VO. Ely's test using DHLS could be widely used for measuring the rectus femoris muscle flexibility in patients with lumbar extension-rotation syndrome, although the inter-rater reliability needs to be established first.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1114-1121
• /
• 2012

There is a cause and effect relationship in that brain injury causes impairment of mental rotation and ultimately independent functional activities. The purpose of this study was to compare the effects of mental rotation on reaction time and precision between the normal adults and chronic hemiparetic stroke patients. Thirty-one patients with chronic hemiparetic stroke and twenty normal adults participated in this study. The participants conducted 2 types of tasks for mental rotation: a comparison task using mirror images, and a rotation task using angular disparity images for 2 different 3-dimensional objects. Each of the 3 possible angled shapes ($90^{\circ}$, $180^{\circ}$, and $270^{\circ}$) appeared in each pair. The test consisted of 6 mirror-reflected image pairs and 6 angular disparity image pairs visualized during angular rotation, and 12 test periods. The subjects were judged on how accurately and rapidly they could distinguish between the mirrored and non-mirrored pairs. The study measured reaction time and precision to compare the effect of mental rotation tasks. Reaction time during all 3 angular conditions were significantly longer in the stroke patients than that in the normal adult during the comparison tasks and the rotation tasks. In addition, precision during mental rotation tasks was not significantly different between normal adults and stroke patients. Our results suggest that rehabilitation therapists should keep in mind that mental rotation is more difficult in stroke population than in normal adults.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.587-590
• /
• 1999

Gaze detection is to locate the position on a monitor screen where a user is looking at. We implement it by a computer vision system setting a camera above a monitor, and a user move (rotates and or translates) her face to gaze at a different position on the monitor. Up to now, we have tried several different approaches and among them the Two Neural Network approach shows the best result which is described in this paper (1.7 inch error for test data including facial rotation. 3.1 inch error for test data including facial rotation and translation).

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.161-166
• /
• 2001

Overconsolidated clays have a different stress history according to the deposit environment. The stress history is classified into (i) rotation angle of stress path, (ii) overconsolidation ratio, and (iii) magnitude of length of recent stress path. Stress-strain behaviour of overconsolidated clays strongly depends on these stress history. In this study a series of drained stress path tests were carried out. Test results indicated that stress-strain behaviour of overconsolidated clay(focused on strain rate) depends on OCR and length of recent stress path, especially rotation angle.