• Archives of Plastic Surgery
• /
• 제33권5호
• /
• pp.531-535
• /
• 2006

Purpose: To report our experience of retro-angular flap for reconstruction of the midface defect. The midface, including nose, lower eyelid, and intercanthal area, is the very prominent area of face. Also midface is more vulnerable to trauma and skin cancer and defect of mid face of highly perceptible. Reconstruction of mid face is difficult because of complexity of anatomy and functions. Following factors should be considered in reconstructive prcedure of midface. First, multiple procedure may need for complete the reconstruction of mid face defect. Second, secondary reconstructive surgeries such as flap rotation or skin graft may need for donor site morbidity. Third, the color, texture and thickness of the skin used are not always complacency. Methods: 8 cases of the midface defects (3 cases of lower eyelid, 1 case of intercanthal area, and 4 cases of nose) from skin cancer were reconstructed with retroangular flap from March 2004 to August 2005. Results: Satisfactory result were obtained in color, texture and donor site scar. There was no major complication such as wound disruption, hematoma, and atrophy of flap. But partial necrosis of flap and bulkiness were observed one case in each. Retroangular flap is simple procedure that can be preceded in one stage under local anesthesia closing primary wound closure. It will leave less visible donor scar, acceptable color, texture and thickness of the skin. Conclusions: The retro-angular flap could be suggested as a safe and effective method for midface reconstruction.

• Earthquakes and Structures
• /
• 제6권1호
• /
• pp.71-87
• /
• 2014

Interaction between closely-spaced buildings subject to earthquake induced strong ground motions, termed in the literature as "seismic pounding", occurs commonly during major seismic events in contemporary congested urban environments. Seismic pounding is not taken into account by current codes of practice and is rarely considered in practice at the design stage of new buildings constructed "in contact" with existing ones. Thus far, limited research work has been devoted to quantify the influence of slab-to-slab pounding on the inelastic seismic demands at critical locations of structural members in adjacent structures that are not aligned in series. In this respect, this paper considers a typical case study of a "new" reinforced concrete (R/C) EC8-compliant, torsionally sensitive, 7-story corner building constructed within a block, in bi-lateral contact with two existing R/C 5-story structures with same height floors. A non-linear local plasticity numerical model is developed and a series of non-linear time-history analyses is undertaken considering the corner building "in isolation" from the existing ones (no-pounding case), and in combination with the existing ones (pounding case). Numerical results are reported in terms of averages of ratios of peak inelastic rotation demands at all structural elements (beams, columns, shear walls) at each storey. It is shown that seismic pounding reduces on average the inelastic demands of the structural members at the lower floors of the 7-story building. However, the discrepancy in structural response of the entire block due to torsion-induced, bi-directionally seismic pounding is substantial as a result of the complex nonlinear dynamics of the coupled building block system.

• Journal of Astronomy and Space Sciences
• /
• 제34권2호
• /
• pp.171-182
• /
• 2017

In this study, the internal structure of a Heumgyeonggak-nu (欽敬閣漏) was designed, and the power transmission mechanism was analyzed. Heumgyeonggak-nu is an automated water clock from the Joseon Dynasty that was installed within Heumgyeonggak (欽敬閣), and it was manufactured in the $20^{th}$ year of the reign of King Sejong (1438). As descriptions of Heumgyeonggak-nu in ancient literature have mostly focused on its external shape, the study of its internal mechanism has been difficult. A detailed analysis of the literature record on Heumgyeonggak-nu (e.g., The Annals of the Joseon Dynasty) indicates that Heumgyeonggak-nu had a three-stage water clock, included a waterfall or tilting vessel (欹器) using the overflowed water, and displayed the time using a ball. In this study, the Cheonhyeong apparatus, water wheel, scoop, and various mechanism wheels were designed so that 16 fixed-type scoops could operate at a constant speed for the water wheel with a diameter of 100 cm. As the scoop can contain 1.25 l of water and the water wheel rotates 61 times a day, a total of 1,220 l of water is required. Also, the power gear wheel was designed as a 366-tooth gear, which supported the operation of the time signal gear wheel. To implement the movement of stars on the celestial sphere, the rotation ratio of the celestial gear wheel to the diurnal motion gear ring was set to 366:365. In addition, to operate the sun movement apparatus on the ecliptic, a gear device was installed on the South Pole axis. It is expected that the results of this study can be used for the manufacture and restoration of the operation model of Heumgyeonggak-nu.

• 전기전자학회논문지
• /
• 제18권1호
• /
• pp.165-171
• /
• 2014

본 논문에서는 MIMO 검출기를 위한 저 복잡도 QR 분해 구조를 제시한다. 제안된 접근 방식에서는, QRD 하드웨어의 연산 복잡도를 감소시키기 위해 다양한 코딕 기반 QRD 알고리즘들이 효율적으로 조합된다. 다양한 QRD 알고리즘들에 대한 연산 복잡도 분석에 기초하여, QRD 과정의 매 단계마다 저 복잡도 접근 방식이 선택된다. 제안된 QRD 구조는 어떤 임의의 차원을 갖는 채널 매트릭스에도 적용 될 수 있고, 매트릭스 차원의 증가에 따라 연산 복잡도 감소도 늘어난다. 제안하는 QR 분해 하드웨어는 삼성 $0.13{\mu}m$ 공정을 사용하여 구현되었다. 실험결과, $4{\times}4$ 행렬의 QR 분해에 대한 제안 구조는 기존의 Householder 코딕 기반의 구조에 비해 47%의 QAR(QRD Rate/Gate count) 향상과 28%의 전력을 절감을 이뤄낼 수 있었다.

• 대한전자공학회논문지
• /
• 제27권10호
• /
• pp.68-77
• /
• 1990

본 논문에서는 CAD 시스템의 신경망을 이용한 자동 입력기 구축을 위한 논리 심볼 인식방법을 제시한다. 손으로 작성한 도면을 인식하기 위해 특징 추출과 log mapping, 그리고 패턴 인식의 다단계 과정을 거친다. 각 논리 심볼의 현태 정보를 추출하기 위해 억제 가중치를 학습할 수 있는 경쟁 학습법을 제안하고 회전과 크기의 변화를 병진된 결과로 나타내는 log mapping을 하고 형태가 변한 심볼을 인식할 수 있도록 겹쳐지는 수용야(Receptive field)를 준비하여 error back propagation을 이용한 다층망으로 심볼을 인식한다.

• 전자공학회논문지T
• /
• 제36T권4호
• /
• pp.1-8
• /
• 1999

본 논문에서는 2차원 물체영상으로부터 면을 분할하고 분할된 면의 형태에 대한 정보를 추출하는 새로운 면 분할 및 표현 알고리즘을 제안한다. 본 논문에서 사용된 signature기법은 물체나 면의 중심을 구하고 중심점으로부터 반시계방향으로 360도 회전하면서 중심점과 경계선까지의 거리 D를 회전각도 ${\theta}$의 함수로 표현하는 방법으로, 물체영상에 적용했을 때 면의 위치에 따라 signature영역에서 하나의 회전각도에 대응하여 2개 이상의 거리값을 갖는 구간들이 존재하게 되며, 이들 거리값들은 각 구간 내에서 면의 개수 만큼의 폐곡선을 형성한다. 이와 같은 특징을 이용하여 면을 분할할 수 있으며, 분할된 면으로부터 꼭지점의 수, 모서리의 수, 오목특성 등과 같은 면의 특성을 얻을 수 있다. 제안된 알고리즘은 면의 일부분이 손실된 경우에도 curve fitting방법을 적용하여 손실된 부분을 용이하게 복구할 수 있다는 장점을 갖는다.

• 복식
• /
• 제63권1호
• /
• pp.97-107
• /
• 2013

To give satisfaction with the fit to a wearer, the wearer's body size and body types should be considered first, this study conducted the descriptive statistical analysis on the upper body measurements of women in their 20s because their body shape has reached the completion stage of adult female's physical development. Also, the analysis classified their upper body types into groups to secure basic data for (maximum satisfaction with the fit of ready-to-wear clothing. The factor analysis was conducted using 49 items of measurement. The main factor analysis was used as a factor extraction method. After extracting the factors with Eigenevalues over 1, the factor loadings were drawn using the Varimax rotation. As a result, 6 factors were extracted. To secure internal consistency, factors that could lower the reliability of the experiment were taken out, so only 36 of the 49 items were used for the analysis. After selecting the items to recognize the main features of each body type, they were used for the final factor analysis. The entire R square of the 6 factors was 84.06%. To classify the upper body types of women in their 20s and to recognize the main features of each body shape type, the researcher conducted the cluster analysis with the items generated from the factor analysis. Through the cluster analysis, the upper body type of women in their 20s were classified into 3 body types. Also, since there are some restrictions on this research objects in terms of local and numbers of measured objects, the results of the this research should only be used as basic data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권10호
• /
• pp.4903-4929
• /
• 2018

In this study, a fully automatic pose and expression invariant 3D face alignment algorithm is proposed to handle frontal and profile face images which is based on a two pass course to fine alignment strategy. The first pass of the algorithm coarsely aligns the face images to an intrinsic coordinate system (ICS) through a single 3D rotation and the second pass aligns them at fine level using a minimum nose tip-scanner distance (MNSD) approach. For facial recognition, multi-view faces are synthesized to exploit real 3D information and test the efficacy of the proposed system. Due to optimal separating hyper plane (OSH), Support Vector Machine (SVM) is employed in multi-view face verification (FV) task. In addition, a multi stage unified classifier based face identification (FI) algorithm is employed which combines results from seven base classifiers, two parallel face recognition algorithms and an exponential rank combiner, all in a hierarchical manner. The performance figures of the proposed methodology are corroborated by extensive experiments performed on four benchmark datasets: GavabDB, Bosphorus, UMB-DB and FRGC v2.0. Results show mark improvement in alignment accuracy and recognition rates. Moreover, a computational complexity analysis has been carried out for the proposed algorithm which reveals its superiority in terms of computational efficiency as well.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.452-459
• /
• 2015

It is important to use bench test results in the design process of anti-rolling tanks. Traditional bench tester is usually designed to perform only roll motions about a fixed axis and relatively small so that the viscous effects may not be neglected. Novel bench tester which could adjust the motion center to realize the coupled motion of sway and roll has been devised and manufactured therefore, large scaled bench tester could be utilized for designing the passive anti-rolling tanks. The time history of the reference signal from the rotation sensor of the bench tester have been recorded and processed to determine the phase angle to derive the Response Amplitude Operator(RAO) of the stabilized ship. The breadth of ART tank model should be large up to 2 m to diminish viscous scale effect and the vertical position of the tank can be varied with the ship's center of motion. The periods and the amplitude of roll motion can be varied from 1.5 sec to 5 sec and up to ±20°, respectively. The components of the tester was expressed in three dimensional digital mockup (DMU) and assembled together in the CAD space. The final configuration of the bench tester has been determined by confirming the smooth operation of the moving parts without interference through the animation in CAD space. New analytic logic are introduced for the determination of hydrodynamic moment and phase difference due to fluid motion in ART and verified through the test. The developed bench tester is believed to be effective and accurate for the verification of stabilization effect of ART taking into the consideration of the sway effect in the design stage.

• 한국방사선학회논문지
• /
• 제12권1호
• /
• pp.85-91
• /
• 2018

전산화단층촬영기법은 투영 영상을 재구성하여 단면 영상을 획득하는 기법으로 다양한 분야에 적용되고 있다. 재구성된 영상의 공간분해능은 장치, 대상, 재구성 과정에 의존한다. 본 논문은 평행빔 구조에서 투영 영상의 개수 및 검출기의 픽셀 크기가 재구성된 영상의 공간분해능에 미치는 영향을 조사하였다. 재구성 프로그램은 Visual C++로 작성하였으며 단면 영상은 $512{\times}512$ 크기로 하였다. 공간분해능의 특성을 평가하기 위해 수학적 막대 팬텀을 구성하였고, Min-Max 방법을 도입하였다. 재구성에 사용되는 투영의 개수가 작은 경우 허상이 나타났으며 Min-Max도 낮았다. 투영의 개수를 지속적으로 증가시키면 재구성된 영상의 공간분해능을 나타내는 Min-Max는 상향 포화되었다. 검출기의 픽셀 크기를 재구성되는 단면 영상의 픽셀 크기의 50%로 줄이면 영상은 거의 완벽하게 복원되고, 검출기픽셀 크기가 증가할수록 Min-Max는 감소하였다. 본 연구는 CT장치 설계 시 요구되는 공간분해능을 달성하기 위해 필요한 검출기 및 회전 스테이지의 정밀도를 결정하는데 도움이 될 것이다.