• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.81-87
• /
• 2020

A stable rotational-to-linear motion transformation structure using a driving mechanism with 2 degrees of freedom was developed for an orthogonal mechanism to prevent the interference of each axis in 2D motion. In this mechanism, a step motor was used for precise position control. This structure was developed to maneuver workparts in micro particle blast machining experiments. To determine the real-time performance of micro particle blast machining, the control, input, and output were operated simultaneously and precise position control was implemented, using a timer interrupt with multiple execution codes. The two step motors obtained precise position control by removing backlash with a ball-screw mechanism. The device has menu-type control codes for user-friendliness, and real-time sequence control was simultaneously adopted for user control input.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.11-16
• /
• 2008

The goal of this study is to evaluate the KLT(Kanade-Lucas-Tomasi) for extracting and tracking the features using various data acquired from UAV. Sequences of images were collected for Jangsu-Gun area to perform the analysis. Four data sets were subjected to extract and track the features using the parameters of the KLT. From the results of the experiment, more than 90 percent of the features extracted from the first frame could successfully track through the next frame when the shift between frames is small. But when the frame to frame motion is large in non-consecutive frames, KLT tracker is failed to track the corresponding points. Future research will be focused on feature tracking of sequence frames with large shift and rotation.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.140-146
• /
• 2005

In this paper, we proposed the frequency offset compensation algorithm and tracking algorithm which could improve the accumulated phase error for HDR-WPAN system. The proposed frequency offset compensation technique estimated each sample phase error by autocorrelation characteristics of CAZAC sequence, estimated phase error multiple each sample in a symbol, and finally compensated for the frequency offset. After frequency offset compensation using two steps, coarse and fine frequency offset, tracking algorithm have to use to compensate for the accumulated phase error. Because there is no pilot symbol in payload, more phase rotation occurred in received signal constellations due to the accumulated phase error as the payload length increase. Tracking algorithm compensates for a cumulative phase error ${\theta}$ between payload data.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.11
• /
• pp.64-69
• /
• 2020

To determine the effective factors for microparticle blasting with precise sequence position control in the x-axis and y-axis directions, we conducted a statistical experimental analysis of blasted square shapes by considering five condition factors. The control input and output were operated simultaneously by rotation-linear motion conversion and fine particles were blasted onto the aluminum specimen by precise position control driving using multiple execution codes. The micro-driving device used for processing was capable of microparticle blasting and of controlling the system through contact with a limit sensor at high speed and a two-degree-of-freedom driving mechanism. Our experiments were conducted on 1,050 specimens of pure aluminum (containing <1% of other elements). The effects of several factors (e.g., particle and nozzle diameters, blasting pressure, and federate and blasting cycle numbers) on the surface roughness and blasted surface's depth were verified through a statistical experimental analysis by applying the dispersion analysis method. This statistical analysis revealed that the nozzle diameter, the blasting pressure, and the blasting cycle number were the dominant factors.

• Journal of KIISE
• /
• v.42 no.6
• /
• pp.748-754
• /
• 2015

This paper proposes a sequential state estimation model consisting of continuous and discrete variables, as a way of generalizing all discrete-state factorial HMM, and gives a design of gait motion model based on the idea. The discrete state variable implements a Markov chain that models the gait dynamics, and for each state of the Markov chain, we created a Gaussian process over the space of the continuous variable. The Markov chain controls the switching among Gaussian processes, each of which models the rotation or various views of a gait state. Then a particle filter-based algorithm is presented to give an approximate filtering solution. Given an input vector sequence presented over time, this finds a trajectory that follows a Gaussian process and occasionally switches to another dynamically. Experimental results show that the proposed model can provide a very intuitive interpretation of video-based gait into a sequence of poses and a sequence of posture states.

• Journal of Acupuncture Research
• /
• v.29 no.5
• /
• pp.151-158
• /
• 2012

Objectives : We hypothesized that reinforcing-reducing manipulations produce different effects by quantity of stimulation, and examined whether the difference is statistically significant or not. Methods : The study was conducted to the students of College of Oriental Medicine, Dongguk University. We needled into $ST_{36}$ and applied 6 kinds of basic reinforcing-reducing manipulations in Huang di nei jing by randomized sequence. And we had the students to fill up the questionnaire in form of visual analog scale(VAS). We examined whether significant differences in VAS existed between reinforcing-reducing manipulations(by t-test). And we examined whether significant differences in VDRRT(VAS difference between reinforcing-reducing technique) values existed along the gender, body mass index(BMI), age(by t-test), and psychological sensitivity(by ANOVA). Results : 1. The total stimulation quantity from reducing technique was significantly higher than that from reinforcing technique. Individually VAS values of reducing techniques were significantly higher in rotation, slow-rapid, lift-thrust, respiration and open-close manipulation. 2. The highest stimulation quantity was from rotation manipulation. And the highest VDRRT value was from slow-rapid manipulation. 3. When VDRRT values were analyzed by gender, age, BMI, and psychological sensitivity, VDRRT was significantly different by BMI in rotation manipulation, and by psychological sensitivity in rotation, lift-thrust, and slow-rapid manipulation. Conclusions : We could verify that reinforcing-reducing techniques induce different therapeutic effects by different quantities of stimulations. It suggests that reinforcing-reducing techniques could be applied universally, regardless of gender or age. Further studies are needed to consider control group, or patient groups in characteristic conditions.

• Structural Engineering and Mechanics
• /
• v.52 no.2
• /
• pp.323-349
• /
• 2014

In this paper, linear buckling analysis of a curved sandwich beam with a flexible core is investigated. Derivation of equations for face sheets is accomplished via the classical theory of curved beam, whereas for the flexible core, the elasticity equations in polar coordinates are implemented. Employing the von-Karman type geometrical non-linearity in strain-displacement relations, nonlinear governing equations are resulted. Linear pre-buckling analysis is performed neglecting the rotation effects in pre-buckling state. Stability equations are concluded based on the adjacent equilibrium criterion. Considering the movable simply supported type of boundary conditions, suitable trigonometric solutions are adopted which satisfy the assumed edge conditions. The critical uniform load of the beam is obtained as a closed-form expression. Numerical results cover the effects of various parameters on the critical buckling load of the curved beam. It is shown that, face thickness, core thickness, core module, fiber angle of faces, stacking sequence of faces and openin angle of the beam all affect greatly on the buckling pressure of the beam and its buckled shape.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.470-473
• /
• 1990

In this thesis, the recognition method of the movement of an 3D object is presented. The information about the movement of a 3D object is used to recognize the object. There are 2 kinds of movements which are translation and rotation. A difference picture is obtained from a sequence of images of a moving object or a scene which is taken by a monocular stationary observer. The 3D movement of an object is recognized by the Artificial Neural Network(ANN) using the difference picture.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.127-130
• /
• 2002

Vibration analysis of rotating blade is the main purpose of the present study. In this study, general formulation is performed for rotating shell structures including the centrifugal force, Coriolis acceleration and initial twist. Furthermore, simplified equations are derived for the case of an open cylindrical shell. Based on the concept of degenerated shell element with the Reisser-Mindlin's assumptions, the finite element method is adopted for solving the problems. In addition, it is investigated the effect of the stacking sequence of the composites on the vibration characteristics of the blade. The results are summarized for the various parameters such as the speed of rotation and pre-twist of the blade. Also, present results are compared with the previous works and experimental data.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.421-427
• /
• 2001

In this paper, a method for selection of the optimal feature vectors is proposed for the classification of closed 2D shapes using the bispectrum of a contour sequence. The bispectrum based on third order cumulants is applied to the contour sequences of the images to extract feature vectors for each planar image. These bispectral feature vectors, which are invariant to shape translation, rotation and scale transformation, can be used to represent two-dimensional planar images, but there is no certain criterion on the selection of the feature vectors for optimal classification of closed 2D images. In this paper, a new method for selecting the optimal bispectral feature vectors based on the variances of the feature vectors. The experimental results are presented using eight different shapes of aircraft images, the feature vectors of the bispectrum from five to fifteen and an weighted mean fuzzy classifier.