• 한국지역사회생활과학회지
• /
• 제24권2호
• /
• pp.187-194
• /
• 2013

The purpose of this study was to define the optimal boxthorn berries washing method for developing the boxthorn berries cleaner. We analyzed the rate of removal of residual pesticides according to washing methods; 1st - habitual washing method, 2nd - drum rotation washing method, 3th - drum rotation and air bubble washing method, 4th - drum rotation and nozzle spray washing method, 5th - drum rotation and air bubble and nozzle spray washing method. A rate of removal of residual pesticides of 88% was detected in the drum rotation and air bubble and nozzle spray washing method, and a rate of 82% was detected in the habitual washing method. The drum rotation and air bubble and nozzle spray washing method appeared to be the best good washing effect compared to the habitual washing method(about 6% compared to 82.0% higher). Clothianidin Triadimefon, Triforine ingredients, the drum rotation and air bubble and nozzle spray washing method efficiency was lower compared to the habitual washing method removal efficiency.

• The Journal of Korean Physical Therapy
• /
• 제22권1호
• /
• pp.27-32
• /
• 2010

Purpose: This study was designed to examine the effects of a Halliwick rotation program on improving balance. Methods: Nine healthy females were randomly assigned to a Halliwick rotation program training as an aquatic group (n=9, age=$22.5{\pm}1.3$ years) or to a control group. The aquatic group trained using a Halliwick rotation program (3 times/week, 30 min/day) for 6 weeks. Balance was measured according to stance position: Hard Plate Open Eyes (HOE), Hard Plate Close Eyes (HCE), Soft Plate Open Eyes (SOE) and Soft Plate Close Eyes (SCE). This was done before the training and 3 and 6 weeks after the training. The data were analyzed with the SPSS Win 12.0 program using repeated measure ANOVA. Results: There were significant training-induced differences in SOE and POE (p<0.05), and in SCE and PCE (p<0.05) by Toe pad. There were significant training-induced differences in SOE and POE (p<0.05) by Heel pad after the aquatic rotation exercise program. Conclusion: The Halliwick rotation program can improve balance.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.1-8
• /
• 2004

In this paper we present the effects that valve train design parameters and operating conditions have on the valve rotation properties of a diesel engine. Rotation of intake and exhaust valves are very closely related to the long term durability of diesel engines. of the valves do not rotate even at a rated engine speed, it causes the uneven wear of the valve seat and valve head contact area, which eventually shortens the engine life. Because the rated speed of a diesel engine is relatively lower than that of a gasoline engine, the operating condition of a diesel engine produces tough environment for valve rotation. Therefore, the valve rotation is an important problem which should be solved in the early stage of engine development. In this study, we developed a new technique to measure the valve rotation and shaking motion simultaneously using three proximity sensors. Valve train rotating properties of a diesel engine were measured under various engine operating conditions.

• 전자공학회논문지S
• /
• 제34S권12호
• /
• pp.98-105
• /
• 1997

Image transformation ahs been widely used in compuater graphics, computer vision, robot vision, and image processing. Image rotation is one of important part of image transformation. In image rotation, a two-pass algorithm has many advantages over a one-pass algorithm in high speed computation. This paper presents a new two-pass algorithm that overcomes the limitations of previously reported effect of interpolation. A brief comparison of existent techniques and the twp-pass algorithm newly suggeste is presented. This paper also present the hardware structure for the two-pass algorithm suggested.

• Journal of the Korean Statistical Society
• /
• 제32권2호
• /
• pp.175-191
• /
• 2003

An empirical Bayesian approach is discussed for estimation of characteristics from the two-way balanced rotation sampling design which includes U.S. Current Population Survey and Canadian Labor Force Survey as special cases. An empirical Bayesian estimator is derived for monthly effect under presence of two types of biases and correlations It is shown that the marginal distribution of observation provides more general correlation structure than that frequentist has assumed. Consistent estimators are derived for hyper-parameters in Normal priors.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.221-224
• /
• 2003

In the open die forging process, it is difficult to optimize process parameters such as die shape, initial ingot size, feeding pitch, rotation angle and other process parameters in the operational environments. Therefore in this study, 3D finite element analysis has been performed to obtain optimal process condition for open die forging process. FEM analyses at various feeding pitches and rotation angles provide process conditions to make round bar having precise dimensional accuracy.

• 한국전문물리치료학회지
• /
• 제21권3호
• /
• pp.1-10
• /
• 2014

The aim of this study was to investigate the effect of hip external rotation angle on pelvis and lower limb muscle activity during prone hip extension. Sixteen healthy men were recruited for this study. Each subject performed an abdominal drawing-in maneuver (ADIM) in a prone position, and extended the dominant hip at three different hip external rotation angles ($0^{\circ}$, $20^{\circ}$, $40^{\circ}$) with a $30^{\circ}$ hip joint abduction. Activity of the gluteus maximus (G Max), gluteus medius (G Med), and hamstring (HAM) and the G Max/HAM and G Med/HAM ratios were determined with surface electromyography (EMG). The EMG signal was normalized to 100% maximum voluntary isometric contractions (MVICs) and expressed as %MVIC. Data were analyzed by one-way repeated analysis of variance (alpha level=.05) and the Bonferroni post hoc test. Significant differences in G Max and G Med muscle activity were noted among the three different hip external rotation angles. G Max muscle activity increased significantly at both $40^{\circ}$ (p=.006) and $20^{\circ}$ (p=.010) compared to a $0^{\circ}$ hip external rotation angle. G Med muscle activity increased significantly at $20^{\circ}$ (p=.013) compared to a $40^{\circ}$ hip external rotation angle. The G Max/HAM activity ratio increased significantly at both $40^{\circ}$ (p=.004) and $20^{\circ}$ (p=.014) compared to a $0^{\circ}$ hip external rotation angle. The G Med/HAM activity ratio increased significantly at $20^{\circ}$ (p=.013) compared to a $40^{\circ}$ hip external rotation angle. In conclusion, $40^{\circ}$ and $20^{\circ}$ hip external rotation angles are recommended to increase G Max activity, and $20^{\circ}$ hip external rotation is advocated to enhance G Med muscle activity during prone hip extension with ADIM and $30^{\circ}$ hip abduction in healthy subjects.

• 한국정밀공학회지
• /
• 제4권2호
• /
• pp.47-55
• /
• 1987

Recently, in precision working, precision is in submicron. Therefore, when we measure various finished goods in superfine measurement, because it is relatively difficult to disregard effect of surroundings, these effect of surroundings must be compensated or canceled. In this study, for roundness measurement, three point method is researched which is able to cancel the effect of rotation accuracy of axis and eccenricity of workpiece. It is difference between this three point method and tradi- tional three point method whose measuring apparatus have three movable pickups posit- ioned with angle and between the pickups. As a results, when rotation accuracy of axis is varied from $0.02\mu\textrm{m}$ to $0.05\mu\textrm{m}$ the width of variation of measured roundness is $0.04\mu\textrm{m}$. And, when eccentricity of workpiece is varied from 0 to $4\mu\textrm{m}$, the width of variation of measured roundness is $0.005\mu\textrm{m}$. These error width are disregardable because they are in 10% of measured roundness. Therefore, by this three point method, the effect of rotation accuracy of axis and the effect of eccentricity of workpiece are canceled. And we are able to select the angle between the pickups ($\phi$ and $\tau$) by means of relation between $F_{k}$ and K.

• 보건의료산업학회지
• /
• 제8권2호
• /
• pp.49-59
• /
• 2014

This study attempted to provide some implications for human resource management of health services organizations by investigating the influence of job rotation on motivation and organizational commitment. For empirical analysis, a study model based on literature review of previous researches was developed, and a survey was conducted for the employees of 8 hospitals located in Busan area. In processing the data, frequency analysis, correlation analysis and path analysis were performed using SPSS 18.0 and AMOS 18.0. Main results of empirical analysis can be summarized as follows: First, procedure of job rotation, did not significantly affect tissue immersion and stimulation, but effect of job rotation, has been found to provide a significant effect. Second, motivation was shown to have a significant influence on emotional and normative commitments, sub-factors of organizational commitment variable. In conclusion, suggest that intentions and opinions of the organizational members need to be actively reflected in job rotations of which the effect can be maximized when they are regularly and reasonably implemented.

• 한국재료학회지
• /
• 제27권6호
• /
• pp.331-338
• /
• 2017

This study was carried out to investigate the optimum condition of a friction stir welding process for a joint of AA2219-T87 and AA2195-T8 dissimilar aluminum alloys. These alloys are known to have good cryogenic properties, and as such to be suitable for use in fuel tanks of space vehicles. The welding parameters include the travelling speed, rotation speed and rotation direction of the tool. The experiment was conducted under conditions in which the travelling speed of the tool was 120-300 mm/min and the rotation speed of the tool was 400-800 rpm. To investigate the effect of the rotation direction of the tool, the joining was performed by switching the positions of the two dissimilar alloys. After welding, the microstructure was observed and the micro-hardness were measured; non-destructive evaluation was carried out to perform tensile tests on defect-free specimens. The result was that the microstructure of the weld joint underwent dynamic recrystallization due to sufficient deformation and frictional heat. The travelling speed of the tool had little effect on the properties of the joint, but the properties of the joint varied with the rotation speed of the tool. The conditions for the best joining properties were 600 rpm and 180-240 mm/min when the AA2219-T8 alloy was on the retreating side(RS).