• Nuclear Engineering and Technology
• /
• 제32권6호
• /
• pp.595-604
• /
• 2000

Flow-Accelerated Corrosion Behavior of SA106 Gr.C steel in room temperature alkaline solution simulating the CANDU primary water condition was studied using Rotating Cylinder Electrode. Systems of RCE were set up and electrochemical parameters were applied at various rotating speeds. Corrosion current density decreased up to pH 10.4 then it increased rapidly at higher pH. This is due to the increasing tendency of cathodic and anodic exchange half-cell current. Corrosion potential shifted slightly upward with rotating velocity. Passive film was formed from pH 9.8 by the mechanism of step oxidation and the subsequent precipitation of ferrous species into hydroxyl compound. Above pH 10.4, the film formation process was active and the film became stable. Corrosion current density showed increment in pH 6.98 with the rotating velocity, while it soon saturated from 1000 rpm above pH 9.8. This seems that activation process which represents formation of passive film on the bare metal surface controls the entire corrosion process

• Corrosion Science and Technology
• /
• 제2권1호
• /
• pp.41-46
• /
• 2003

Flow-Accelerated Corrosion behavior concerning both activation and mass transfer process of SA106 Gr.C steel was studied using rotating cylinder electrode in room temperature alkaline solution by DC and AC electrochemical techniques. Passive film was tanned from pH 9.8 by step oxidation of ferrous product into hydroxyl compound. Corrosion potential shifted slightly upward with rotating velocity through the diffusion of cathodic species. Corrosion current density increased with rotating velocity in pH 6.98, while it soon saturated from 1000 rpm at above pH 9.8. On the other hand the limiting current increased with rotating speed regardless of pH values. It seems that activation process, which represents formation of passive film on the bare metal surface, controls the entire corrosion kinetics

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 요약집 춘계학술발표대회
• /
• pp.326.1-326.1
• /
• 2004

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2019년도 춘계학술논문요약집
• /
• pp.102-103
• /
• 2019

• Journal of Electrochemical Science and Technology
• /
• 제12권1호
• /
• pp.58-66
• /
• 2021

Spiral-wound woven wire meshes packed bed rotating cylinder electrode was used for the simultaneous removal of cadmium (Cd) and copper (Cu) from a binary solution. The effects of weight percent of each metal on the removal and current efficiencies were studied at an operating current of 345A, while the effect of current on the removal efficiency of both metals was investigated at three levels of current (240, 345.and 400 mA). The experiments were carried out at constant rotation speed 800 rpm, pH = 3, and a total concentration of metals (500 ppm). The results showed that the removal efficiency of copper increased from 89% to 99.4% as its weight percent increased from 20% to100%. In a similar fashion, the removal efficiency of cadmium increased from 81% to 97% as its weight percent increased from 20% to100%. The results confirmed that the removal efficiency of any metals declined in the presence of the other. Increasing of current resulted in increasing the removal efficiency of both metals at different weight percents. The results confirmed that current efficiencies for removing of copper and cadmium simultaneously decline with increasing of electrolysis time and weight percent of cadmium or with decreasing the weight percent of copper. Current efficiency was higher at the initial stage of electrolysis for all weight percents of metals. The results showed that the decay of copper concentration was exponential at all weight percents of copper, confirming that the electrodeposition of copper is under mass transfer control in the presence of cadmium. While the decay of cadmium concentration was linear at lower weight percent of cadmium then changed to an exponential behavior at high weight percent of cadmium in the presence of copper.

• Journal of Welding and Joining
• /
• 제19권3호
• /
• pp.334-341
• /
• 2001

The chemical and geometric effects of weld on flow-accelerated corrosion (FAC) of SA106 Gr.C low alloy steel pipe in 3.5wt% NaCl and simulated feedwater of nuclear power plant have been investigated by using rotating cylinder electrode. Polarization test and weight loss test were conducted and compared at rotating speed of 2000rpm (3.14m/s) with the variables of chemical and geometric parameters. The results showed that the chemical effects were relatively larger than the geometric effects, and the welded parts were the local anode and preferentially corroded, which could be explained by the differences between microstructural and compositional parameters. On the other hand, under active corrosion conditions, the heat affected zone were severely corroded and microstructural effects became the important role in the whole process.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.156-156
• /
• 2015

도금 시뮬레이션의 목적은 실제 도금 상황에서의 전류밀도 및 도금두께 분포를 정확히 예측하여 최상의 품질과 최적의 공정조건을 확립하는데 있다. 제품에 부착된 도금 두께는 기하학적 배치에 의한 저항 (1차 전류밀도), 전기화학적 전하교환 반응에 의한 분극 (2차 전류밀도) 및 확산, 유동 등 도금물질의 공급에 의한 분극(3차 전류밀도)에 의해 결정이 된다. 현재까지 도금 시뮬레이션은 1차 전류밀도 예측에 대한 전자기학적 해석과 Butler-Volmer 식에 근거한 동력학적 전기화학 해석을 통해 2차 전류밀도 분포 해석만 이루어졌다. 즉, 도금 반응에 있어서 물질공급은 항상 일정하게 유지되는 것을 가정하고 해석을 하였다. 이는 3차 전류밀도 분포에 있어서 전극반응 계면에서의 유동에 의한 물질공급이 전기화학과는 다른 물리(physics) 영역이어서 이를 전기화학과 coupling 하는데 기술적으로 어렵기 때문이었다. 그러므로, 물질공급반응이 속도결정단계가 되는 고속도금이나 저농도 도금, gap, tranch, via hole, through hole 등의 도금의 경우에는 해석결과에 큰 오차를 야기하게 된다. 본 발표에서는 그동안 접근하지 못했던 전기도금 해석에 있어서 유동해석을 커플링하여 다중물리해석을 한 결과를 발표한다. 시편으로는 회전원판전극과 회전 헐셀을 이용하여 회전속도 (rpm)에 따른 전류밀도 및 도금두께 분포의 변화 거동을 예측하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.269-272
• /
• 2000

The flow accelerated galvanic corrosion characteristics of a carbon steel coupled to stainless steel were investigated in deaerated alkaline-chloride solutions as a function of flow velocities(0, 0.2, 0.4 and 0.6 m/s), pH(8, 9, and 10) and temperature(25, 50 and $75^{\circ}C$). The electrochemical properties of specimens were investigated by potentiodynamic test and galvanic corrosion test using RCE(Rotating Cylinder Electrode). Carbon steel did not show passive behavior in the alkaline-chloride solution. The galvanic current density increases with increasing flow velocity and temperature, but decreased with increasing pH. Flow velocity had a small effect on the galvanic current density at $25^{\circ}C$, whereas the flow velocity increased galvanic current density significantly at $50^{\circ}C$ and $75^{\circ}C$. This might be due to the increased solubility of magnetite at the higher temperature.

• 대한기계학회논문집B
• /
• 제36권10호
• /
• pp.1011-1017
• /
• 2012

본 논문에서는 롤타입 마스크를 사용한 마이크로/나노 구조 제작용 광학 리소그래피 방법을 소개한다. 이 생산 방법은 다양한 목표 해상도에 따라 위상지연 리소그래피방법과 포토리소그래피로 나뉜다. 사용되는 빛의 파장대보다 작은 해상도를 갖는 패턴을 제작하기 위해서 실린더 형태의 위상지연 마스크를 활용한 근거리 노광 방식을 사용한다. 또한 필름 형태의 금속 마스크를 써서 포토리소그래피를 연속방식으로 수행하였는데 이 방식은 실린더 마스크의 회전수를 조절함으로써 노광 결과 패턴의 주기를 실시간으로 조절할 수 있다. 이 기술의 응용으로 금속 그물패턴으로 만들어진 100 $mm^2$ 넓이의 투명전극을 제작하였다.