• Journal of electromagnetic engineering and science
• /
• 제15권1호
• /
• pp.20-25
• /
• 2015

A circularly rotated array for a dual polarized applicator in a superficial hyperthermia system is proposed. The applicator has a wider effective treatment area due to the $180^{\circ}$ phase shift. The dual polarized circularly rotated array (DPCRA) suppresses overheating at the center of the array and helps evenly distribute the heat. This array provides a more effective treatment area than a lattice array when a $2{\times}2$ dual polarized array is fitted to the treatment area. The treatment area is 71.5% of the aperture, whereas the effective treatment areas of the $2{\times}2$ dual polarized lattice array (DPLA) and the single polarized array (SPA) are 57.2% and 38.6% of the same aperture, respectively. The measurement matches the simulation results without blood circulation effects. In a $2{\times}2$ array applicator, the proposed DPCRA has more heat uniformity than the DLA and the SPA.

• International Journal of Internet, Broadcasting and Communication
• /
• 제11권3호
• /
• pp.34-40
• /
• 2019

In spatial modulation (SM), both the signal symbol and spatial symbol, i.e., the index of the antenna from which signal symbol is transmitted, carry information. To increase the number of bits carried by spatial symbols, more transmit antennas are required. In the generalized SM (GSM), the same signal symbol is transmitted from a combination of antennas, resulting in a reduction in the number of antennas required to achieve a given spectral efficiency. In this paper, we propose a rotated-symbol GSM (RGSM), in which the signal symbol is rotated with an angle corresponding to the position of the antenna index within the combination. This increases the number of spatial symbols by a factor equivalent to the length of the antenna combinations of the GSM. Numerically, SM, GSM and RGSM require 128, 17 and 12 transmit antennas to convey seven bits through the spatial symbols. Simulation results show that RGSM performs relatively close to GSM, and in several system settings, their error performances coincide.

• 한국전문물리치료학회지
• /
• 제8권2호
• /
• pp.1-16
• /
• 2001

This study was designed to identify the effects of foot position on electromyographic (EMG) activity of the quadriceps femoris during maximum voluntary contraction (MVC) in standing. Twenty young adults who had not experienced any knee injuries were recruited. Their Q-angles were within a normal range. They were asked to stand in five different foot positions ($40^{\circ}$ externally rotated, $30^{\circ}$ internally rotated, neutral, $20^{\circ}$ plantarflexed, and $10^{\circ}$ dorsiflexed foot position). The EMG activities of the vastus lateralis (VL), rectus femoris (RF), and vastus medialis oblique (VMO) were recorded in standing by surface electrodes and normalized by MVC EMG values derived from manual muscle test. The normalized EMG activity levels (%MVC EMG) of muscles in the five foot positions were compared using repeated measures ANOVA. The EMG activity levels of the VL, RF, and VMO were the highest when foot was externally rotated. The EMG activity levels of the VL and RF were significantly different among the foot positions (p<.05). However, EMG activity levels of the VL, RF, VMO, and VMO/VL ratio did not show significant differences in each foot position (p> .05). The results suggest that the quadriceps femoris may be effectively activated by performing MVC at an externally rotated foot position. Therefore, the externally rotated foot position can be considered as an effective foot position for quadriceps femoris strengthening exercise. Further studies are needed to identify whether there are differences in the effects of foot position on muscle strength after MVC exercise of quadriceps femoris in standing.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.146.2-146.2
• /
• 2013

Copper is considered to be the most promising substrate for the growth of high-quality and large area graphene by chemical vapor deposition (CVD), in particular, on the (111) facet. Because the interactions between graphene and Cu substrates influence the orientation, quality, and properties of the synthesized graphene, we studied the interactions using angle-resolved photoemission spectroscopy. The evolution of both the Shockley surface state of the Cu(111) and the ${\pi}$ band of the graphene was measured from the initial stage of CVD growth to the formation of a monolayer. Graphene growth was initiated along the Cu(111) lattice, where the Dirac band crossed the Fermi energy (EF) at the K point without hybridization with the d-band of Cu. Then two rotated domains were additionally grown as the area covered with graphene became wider. The Dirac energy was about -0.4 eV and the energy of the Shockley surface state of Cu(111) shifted toward the EF by ~0.15 eV upon graphene formation. These results indicate weak interactions between graphene and Cu, and the electron transfer is limited to that between the Shockley surface state of Cu(111) and the ${\pi}$ band of graphene. This weak interaction and slight lattice mismatch between graphene and Cu resulted in the growth of rotated graphene domains ($9.6^{\circ}$ and $8.4^{\circ}$), which showed no significant differences in the Dirac band with respect to different orientations. These rotated graphene domains resulted in grain boundaries which would hinder a large-sized single monolayer growth on Cu substrates.

• 한국컴퓨터그래픽스학회논문지
• /
• 제15권1호
• /
• pp.17-23
• /
• 2009

본 논문에서는 다수의 회전 이미지를 생성, 이용해 결과의 다양성을 추구하고 기존 기법들의 문제인 예제 가장자리 경계면의 Neighborhood를 이용해 생기는 경계선을 완화한 합성 결과물을 생성하는 새 예제 기반 텍스처 합성 방법을 제안한다. 논문에서 제안하는 방법은 구현하기에 따라 공간 결정적인 형태로 구축할 수 있으며 병렬 처리가 가능한 하드웨어를 이용한 병렬 연산처리로 합성 속도 가속을 하는데도 유리한 구조를 가지고 있다.

• Nuclear Engineering and Technology
• /
• 제38권1호
• /
• pp.69-80
• /
• 2006

Fluid-elastic instability in an air-water two-phase cross-flow has been experimentally investigated using two different arrays of straight tube bundles: normal square (NS) array and rotated square (RS) array tube bundles with the same pitch-to-diameter ratio of 1.633. Experiments have been performed over wide ranges of mass flux and void fraction. The quantitative tube vibration displacement was measured using a pair of strain gages and the detailed orbit of the tube motion was analyzed from high-speed video recordings. The present study provides the flow pattern, detailed tube vibration response, damping ratio, hydrodynamic mass, and the fluid-elastic instability for each tube bundle. Tube vibration characteristics of the RS array tube bundle in the two-phase flow condition were quite different from those of the NS array tube bundle with respect to the vortex shedding induced vibration and the shape of the oval orbit of the tube motion at the fluid-elastic instability as well as the fluid-elastic instability constant.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.855-868
• /
• 1996

In this paper, multiplhase only filter(MPOFs) are designed using simulated annealing algorithm. These filters have excellent recognition characteristics for similar patterns or rotated patterns and enhance optical efficiency as well as spatial-bandwidth product by deleting mirror image. As the result of computer simulation to certify recogntion characteristics of similar patterns, simulated annealing-MPOF(SA-MPOF) has superior discrimination and higher correlation peak values than cosine binary phase only filters(CBPOF) and simpulated annealing-BPOF (SA-BPOF). THe filter having training process for rotated patterns of arbitraty possible angle can overcome that phase only filter(POF) and CBPOF can't recognize rotated input patterns.

• 제어로봇시스템학회논문지
• /
• 제16권4호
• /
• pp.339-345
• /
• 2010

This paper introduces GP(Genetic Programming) based robust corner detectors for scaled and rotated images. Various empirical algorithms have been studied to improve computational speed and accuracy including approaches, such as the Harris and SUSAN, FAST corner detectors. These techniques are highly efficient for well-defined corners, but are limited to corner-like edges which are often generated in rotated images. It is very difficult to detect correctly edges which have characteristics similar to corners. In this paper, we have focused the above challenging problem and proposed Genetic Programming-based automated generation of corner detectors which is robust to scaled and rotated images. The proposed method is compared to the existing corner detectors on test images and shows superior results.

• Current Research on Agriculture and Life Sciences
• /
• 제15권
• /
• pp.7-16
• /
• 1997

답전윤환답(沓田輪換沓)에 콩을 재배(栽培)할 경우 석회시용(石灰施用)에 의한 산도보정(酸度補正)과 근류균(根瘤菌) 접종(接種)의 효과를 검토한 바, 시험결과를 요약하면 다음과 같다. 1. 답전윤환답(沓田輪換沓) 콩재배시 근류착생(根瘤着生) 정도(程度)는 1년차에 비하여 3년차 답전윤환답(沓田輪換沓)에서 높았으며 콩의 생육초기(生育初期)에 비하여 개화기(開花期)에는 그 차이가 더 컸으며, 품종간에도 근류착생(根瘤着生)에 차이가 인정 되었다. 2. 3년차 답전윤환답(沓田輪換沓)에서는 유.무한형(有.無限型) 공(共)히 석회(石灰) 무시용구(無施用區)에서는 근류접종(根瘤接種) 효과가 인정되었으나 석회시용시(石灰施用時)는 근류접종(根瘤接種)의 효과(效果)가 인정되지 않았다. 3. 석회시용(石灰施用)과 근류접종(根瘤接種)이 콩의 초기생육(初期生育)에는 크게 영향하지 않았고, 개화기(開花期)에는 이들 형질의 대부분이 석회시용(石灰施用)에 남해(南海)콩에비해 무한형(無限型)인 Williams 79에서 증가폭이 더 컸다. 4. 성숙기(成熟期)의 수량구성(收量構成) 요소(要素) 및 수량생(收量生)이 석회시용(石灰施用)에 의하여 증가하였는데, 품종별(品種別)로는 남해(南海)콩에서 보다 Williams79에서 더 컸다. 또한, 2품종 공(共)히 근류접종(根瘤接種)의 효과(效果)는 석회(石灰) 시용시(施用時)에는 없었으나 석회(石灰) 무시용시(無施用時)에는 근류접종(根瘤接種)의 효과(效果)가 인정(認定)되었다. 5. 석회(石灰) 및 근류접종(根瘤接種)에 관계(關係)없이 1년차 대비(對比) 3년차의 답전윤환답(沓田輪換沓)에서 수량구성(收量構成) 요소(要素) 및 수량성(收量性)이 높아 답전윤환(沓田輪換) 재배(栽培)의 년차증가(年次增加)에 의(依)해 콩의 생육(生育)은 양호(良好)해지는 것으로 나타났다.

• 열처리공학회지
• /
• 제31권6호
• /
• pp.275-282
• /
• 2018

Two different modes of rolling were applied to control the texture development in tantalum sheet. In the conventional uni-directional rolling, the typical rolling textures of a body-centered cubic metal which was primarily composed of <110>//(rolling direction) was developed. In a cross rolling where the specimen was rotated by $90^{\circ}$ between each pass, the rotated cube components, i.e. {100}<011> were greatly reinforced. The prediction of lattice rotation by the full-constraint Taylor model showed that the high stability and the symmetry of the rotated cube components caused their strengthening in cross-rolling. The two specimens were heated to $1,100^{\circ}C$ at $9^{\circ}C/min$and held for 1 hour for annealing, then cooled to room temperature in atmosphere. In spite of the significant difference in the deformation textures, the annealing textures were very similar. They developed strong <111>//(plane normal) components with negligible intensity at the rotated cube components, which was attributed to the negligible capability of the latter components to provide effective recrystallized grains.