• 한국식품영양학회지
• /
• 제1권2호
• /
• pp.43-49
• /
• 1988

Fermented barley food was produced by the combining action of an enzyme and a lactobacillus. When Lactobacillus sp. L-5 and commercial liquefying amylase from Tae Pyeong Yang Chemical Co. were selected, inoculated on steamed barley and cultivated at 37$^{\circ}C$ for 48hrs, the fermented product of good quality was obtained. In batch cultivation using rotary drum fermentor, viable cell count reached 1.1$\times$10CFU/g after 12hrs' cultivation, and specific growth rate in logarithmic phase was 0.6hr-1. Viable cell count, acidity, pH, concentration of reducing sugar and viscosity of the 48hrs' fermentation product from rotary drum fermentor was 4.3$\times$108CFU/g, 1.17%, 3.1, 10.7% and 1430cp.

• 한국축산시설환경학회지
• /
• 제11권2호
• /
• pp.125-134
• /
• 2005

본 연구는 남은 음식물에 수분흡수제 또는 영양 보충제로 유기성 부산물인 제과부산물, 밀기울, 맥강, 육계분 등을 혼합한 후 rotary drum 방식의 반건식 살균처리 및 호기적 숙성 과정 별 혼합사료 내의 미생물 분포 및 사료단백질 pepsin 소화율과 in vitro 영양소 소화율을 측정하여 실제 동물 급여 시의 효능을 사전 예측하고자 실시하였다. 살균 처리 공정($80^{\circ}C$에서 30분간)은 전반적으로 균수를 감소시키는 경향과 곰팡이를 사멸시키는 효과가 있었으며(P<0.05), 연이은 숙성 과정은 살균과정에서 감소된 lactic acid bacteria를 증식시키는 효과가 있었다(P<0.05). 열처리 살균 공정은 혼합사료 단백질의 pepsin 소화율을 감소시켰다(P<0.05). 사료원료 건물 및 유기물의 in vitro 소화율은 제과부산물>밀기울>남은 음식물=맥강 순으로 높았다. 상기한 연구 결과는 반건식 남은 음식물 혼합사료의 동물 급여시 중요한 기초 자료로 활용될 것이다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.41-45
• /
• 2004

A dust injection system was developed for the lime calcining rotary kiln for the coke dust from the coke dry quenching(CDQ) facility to be used as a fuel. The CDQ dust was injected with the gaseous fuel through the hole in the burner. In order to prevent the spot heating large particles should be removed from dust and dust should be injected as fast as possible so that particle combustion lasts as long as possible without precipitation. This is especially necessary when dust is burned together with gaseous fuel because the gaseous fuel can not go so far and in addition dust combustion aggravates hot spot heating. In this research a rotation drum screen was used to remove particles with diameter larger than 4mm and dust injection speed was 40m/sec. And the burner was adjusted not to use swirl that hinders flame go far away. With these measures scale generation iside the kiln could be reduced to be negligible and in addition NOx emission could be reduced from 150ppm to 20ppm. The fuel reduction was about 85Mcal/T-lime.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.473-476
• /
• 2008

In this paper, we designed the main mechanism of high throughput device for rod-cuts of spent fuel. For this, we analyzed the mechanical methods(slitting, ball mill, roller straightening) and chemical methods(muffle furnace, rotary kiln). As the results, methods of ball drop and rotary drum for concepts design were selected in the analysis step. For enhancement of oxidation rate, we devised the blades on the reactor with mesh type. Also, for enhancement of decladding rate, we designed ball size and rotation reactor with mesh type and devised the vacuum system for fission products. Mechanisms of oxidation and recovery can simultaneously handle the rod-cuts of spent fuel and independently recover. The results of mechanism design can be used for scale-up of high throughput device.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.877-885
• /
• 1993

Three types of solar grain dryers, namely , the solar grain bin dryer, the solar greenhouse rotary drum dryer and small scale solar green house tray dryer, have been tested. The results showed that each type of solar grain dryer has its feature. These solar drying units have three main advantages : (1) Required commercial energy to remove 1Kg moist from rough rice is only 5.3% to 15.8% of the energy consumed by common heated dryer : 2) The area of solar drying system is only about 10% of the area of the sunny ground to give equal drying capacity ; (3) There are good drying quality in the moisture uniform , germination percentage, and grain color.

• Journal of Biosystems Engineering
• /
• 제34권3호
• /
• pp.140-146
• /
• 2009

The garlic, along with the red pepper, is one of the major seasoning vegetables in Korea. Garlic clove planting is one of the most laborious operations. Labor cost is the main source of high production cost of the garlic. Because of the geometrical uniqueness and irregularity of garlic cloves, mechanization of garlic clove planting is very difficult. To overcome price competition against the imported garlic, however, there has been a need of development of a clove metering device and a planting device for the garlic clove planter. Computer simulation, laboratory tests and field tests were conducted to develop a garlic clove planter. This research was conducted to drop garlic cloves into a soil holes through a drum bucket metering system and a rotary type planting system. Followings are the major achievements from this study. 1. The metering device consisted of a drum, a guide, a bucket and a bucket cover. Opening positions of the metering hopper were evaluated at different positions and trajectories of planting hoppers. The simulation showed that the optimum positions of hopper was -15${\sim}$0 mm in the x direction. 2. When the planter was tested under different soil textures and water contents, the best performances were obtained in a upland field with 29.1% water content and a paddy field with 18.3% water content where single clove metering and missing rate were 88.4% and 1.3%, and 90.7% and 2.0%, respectively.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.54-59
• /
• 2004

The methods for the minimization of fresh water consumption, waste water generation and water contamination have been greatly investigated and developed for last ten years. Recently, the rising cost of waste water treatment and the more strict environmental regulation lead to the higher demand of more efficient and systematic methods for process water management. The water reuse technology, which not only reduce the process water needs but also minimize waste water generation within the process, could be one of most efficient way for current demand. In this study, the practical way for reduction of water pollution and optimal reuse or recycle of process water in a newsprint mill was investigated by using a simulation model. The result of computer simulation showed that the COD level of approach system could be reduced by 50% after the stock concentration at the 2nd disc filter was increased upto 30%. The application of WRDF(Wrinkled Rotary Drum Filter) to the newsprint mill was carried out with pilot scale. The process water treated by WRDF had enough cleanliness to substitute the forming fabric shower water with the PDF water, which could result in the 30% reduction in fresh water consumption.

• 수도
• /
• 제24권5호통권86호
• /
• pp.29-44
• /
• 1997

Sewage sludge produced in Korea was 1,275,800 tons (dewatered sludge cake) per year in 1996, which is 3,495 tons per day, 0.303% of 11,526,100 tons per day of sewage treated in 79 sewage treatment plants. Sludge production has been and will be increasing in accordance with construction of new facilities for sewage treatment. Most of the sludge is currently disposed by landfill and ocean dumping, but it is becoming difficult to find suitable sites for landfill, particularly in big cities such as Seoul. In addition, rapid increase of landfill cost is anticipated in a near future. Current trend for sludge disposal in advanced countries is land application. Over the past 10 to 20 years in the United States, sludge management practices have changed significantly, moving from disposal to beneficial use. They use biosolid for utilization instead of sludge for disposal. Under the Clean Water Act of 1972, amended in 1987 by Congress, the U.S. EPA was required to develop regulations for the use and disposal of sewage sludge. The EPA assessed the potential for pollutants in sewage sludge to affect public health and the environment through a number of different routes of exposure. The Agency also assessed the potential risk to human health through contamination of drinking water sources or surface water when sludge is disposed on land. The Final Rules were signed by the EPA Administrator and were published (Federal Register, 1993). These rules state that sewage sludge shall not be applied to land if the concentration of any pollutant in the sludge exceeds the ceiling concentration. In addition, the cumulative loading rate for each pollutant shall not exceed the cumulative pollutant loading rate nor should the concentration of each pollutant in the sludge exceed the monthly average concentration for the pollutant. The annual pollutant loading rate generally applies to applications of sewage sludge on agricultural lands. The most popular beneficial use of sewage sludge is land application. The sludge has to be stabilized for appling to land. One of the stabilization process for sewage sludge is lime stabilization process. The stabilization process is consisted of the stabilizing process and the drying process. Stabilization reactor can be a drum type reactor in which a crossed mixer is equipped. The additive agents are a very reactive mixture of calcium oxide and others. The stabilized sludge is dried in sun drier or rotary kiln.

• 한국건설순환자원학회논문집
• /
• 제3권2호
• /
• pp.171-179
• /
• 2015

최근 건설산업에서는 천연 골재 고갈과 엄격한 환경 규제로 인하여 골재 부족 현상이 지속되고 있기 때문에 대체 골재 개발이 시급한 실정이다. 따라서 본 연구에서는 기존 전로슬래그 처리방식의 문제점을 해결하기 위한 새로운 처리방식 즉, 고온 용융슬래그를 회전식 드럼내에 투입한 다음 냉각수, 압축공기 및 강철구를 이용하여 급속 냉각, 파쇄 처리하는 공정에서 발생되는 습식 급랭 전로슬래그를 콘크리트용 잔골재로 활용하기 위하여 기초물성을 검토하였다. 또한 본 연구를 통하여 콘크리트용 잔골재로써 습식 급랭 전로슬래그의 활용 방안을 제안하고자 한다.

• 한국터널지하공간학회 논문집
• /
• 제21권1호
• /
• pp.49-59
• /
• 2019

본 연구는 로터리드럼커터에 적용된 두 종류의 코니컬 픽커터에 대한 현장시험을 통해 시험 전과 후의 육안조사와 중량감소 및 마모부피를 측정하여 코니컬 픽커터의 내구성을 비교 분석하였다. 육안조사를 통해 슬림 타입 코니컬 픽커터에서만 총 9개의 삽입재 손실이 나타남을 확인하였고 삽입재 보호를 위해 두부의 두께가 중요함을 알 수 있었다. 시험 전과 후의 픽커터의 중량손실과 마모부피는 헤비타입이 슬림타입에 비해 반이하로 작게 나타나 경암반에서 헤비타입이 더 유용함을 확인할 수 있었다. 픽커터의 마모손실을 판단할 때, 중량측정과 마모부피 측정결과의 상호 비교는 재료의 단위중량과 굴착에 의한 스폴링에 의해 차이가 나타날 수 있으므로 주의해야 할 것으로 판단된다.