• Restorative Dentistry and Endodontics
• /
• v.27 no.3
• /
• pp.270-276
• /
• 2002

치근단 수술시 구동형 수술현미경과 미세수술기구들이 사용됨에 따라 치근단 절제술 후 역충전와동의 효과적인 형성 및 충전을 위해 새로운 초음파기구가 개발되었다 따라서 본 연구에서는 최근 상품화되어 사용되고 있는 초음파기구중 신속하게 역충전와동을 형성할 뿐아니라 충분한 깊이를 제공하여 역충전재료의 변연누출 감소에 효과적인 것으로 알려져 있는 3종의 초음파기구를 사용하여 역 충전와동을 형성 한 후 SuperEBA로 충전하여 그 변연누출을 비교하였다. 모두 56개의 근첨형성이 완료된 단근치를 선택하여 Profile .06를 사용하여 근관형성한 후 음성대조군 2개를 제외한 54개의 치아를 수직가압법으로 충전하였다. 근단부 3mm를 절제한 뒤 KaVo Isthmus, KaVo T-shape 그리고 KiS tip을 각각 18개의 치아에 사용하여 역충전와동을 형성하고 그중 각각 2개의 양성대조군 치아를 제외한 나머지 치아에 SuperEBA로 충전하였다. 각치아는 1% methylene blue dye에 침윤시켜 1주일 후 종절단하여 그 색소침투정도를 측정, 비교하였다. 실험결과 측정된 평균 변연누출은 KaVo Isthmus가 $1.5\pm$1.4mm, KaVo T-shape이 1.7$\pm$1.2mm이고 KiS tip은 1.1$\pm$0.7mm 이었으며, 통계적으로 유의할만한 차이는 없었다. 따라서 초음파기구를 사용한 역충전와동의 임상시술 성공여부는 술자의 편의도와 임상적 사용시 조작능력에 달려 있는 것으로 사료된다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.5
• /
• pp.1007-1014
• /
• 1998

A questionnaire was administered to 850 middle school students in Jinju city and Hamyang province to asses their body shape preferences. Their mean current BMI(body mass index, Kg/㎡) in males(19.23±2.77) was higher than that in females(18.61±2.59). On the other hand, significant differences in BMI were not found between areas. The perceived desired weights for their current height were about+0.22kg(males) and -4.32kg(females) of their actual weights. In spite of the average weight group, many wished to lose weight because of their tendency to perceive themselves as overweight, especially among rural females. Their ideal body shape as perceived by them were 'normal' in males and 'a bit thin' in females, independent of the areas. As for the 'contentment' regarding their current weight and health, the most satisfied group in males were estimated average weight and slightly overweight group, respectively. While, the most satisfied group in females were estimated slightly underweight and overweight group, respectively. Their extreme slim-body preference might have its root in the lack of proper understanding of what the 'standard' body weight was.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.3
• /
• pp.276-283
• /
• 2019

Nitinol is an alloy of nickel and titanium. Nitinol is one of the shape memory alloys(SMA) that are restored to a remembered form, changing the crystal structure at a given temperature. Because of these unique features, it is used in medical devices, high precision sensors, and aerospace industries. However, the conventional method of mechanical machining for nitinol has problems of thermal and residual stress after processing. Therefore, the electrochemical machining(ECM), which does not produce residual stress and thermal deformation, has emerged as an alternative processing technique. In addition, to replace the existing experimental planning methods, this study used deep neural network(DNN), which is the basis for AI. This method was shown to be more useful than conventional method of design of experiments(RSM, Taguchi, Regression) by applying deep neural network(DNN) to electrochemical machining(ECM) and comparing root mean square errors(RMSE). Comparison with actual experimental values has shown that DNN is a more useful method than conventional method. (DOE - RSM, Taguchi, Regression). The result of the machining was accurately and efficiently predicted by applying electrochemical machining(ECM) and deep neural network(DNN) to the shape memory alloy(SMA), which is a hard-mechinability material.

• Smart Structures and Systems
• /
• v.31 no.5
• /
• pp.531-543
• /
• 2023

Base isolation is one of the most widely implemented and well-known technique to reduce structural vibration and damages during an earthquake. However, while the base-isolated structure reduces storey drift significantly, it also increases the base drifts causing many practical problems. This study proposes the use of Shape Memory Alloys (SMA) wires for the reduction in base drift while controlling the overall structure vibrations. A multi-degree-of-freedom (MDOF) structure along with base isolators and Shape-Memory-Alloys (SMA) wires in diagonal is tested experimentally and analytically. The isolation bearing considered in this study consists of laminates of steel and silicon rubber. The performance of the proposed structure is evaluated and studied under different loadings including harmonic loading and seismic excitation. To assess the seismic performance of the proposed structure, shake table tests are conducted on base-isolated MDOF frame structure incorporating SMA wires, which is subjected to incremental harmonic and historic seismic loadings. Root mean square acceleration, displacement and drift are analyzed and discussed in detail for each story. To better understand the structure response, the percentage reduction of displacement is also determined for each story. The result shows that the reduction in the response of the proposed structure is much better than conventional base-isolated structure.

• Journal of Periodontal and Implant Science
• /
• v.27 no.1
• /
• pp.191-203
• /
• 1997

Recently, alteration on chemical treatment on the root and removal of pathologic bacteria, which is the main reason for periodontal disease, by complete removal of infected cementum layer was been emphasied In this study, teeth extracted due to periodontal disease were root planed using periodontal curette and roto bur. Then they were treated with different concentration of Tetracycline HCI at different time. The state of root surface and change in the pre and post treatment was observed. The results were as follows. 1. The group treatment with periodontal curette and saline showed remaining plaque, debris and irregular surface and no dentianl tubule orifice could be seen. 2. The group treatment with periodontal curette and tetracycline HCI showed process compoed with decacified material and there was concanity seemed to be a lacunae of cementocyte. 3. The group treatment with roto bur and saline, there was no remaning plaque and partial dentinal tubule orifice could be seen but smear layer covering them.4. The group treatment with roto bur and tetracycline HCI showed various shape and size dentinal tubule orifice could be seen. From the results, roto bur showed cleaner surfaces than treatment with periodontal curette. But still smear layer existed. Thus for regeneration of periodontal tissue, chemical treatment using tetracycline HCI should follow roto bur treatment. And it is considered that the treatment time is more important than the concentration of tetracycline HCl.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.659-669
• /
• 1997

The goals of root canal instrumentation are complete debridement of pulp tissue, removal of microbes and affected dentin, and proper cleaning and shaping of the root canal space before obturation. Instrumentation with stainless steel files has been shown to produce undesirable results in canals, regardless of the improved technique or modified file type used. Nickel-Titanium(Ni-Ti) alloy has been shown to be exceptionally elastic, having a lower bending moment and lower permanent set after torsion, compared with similar gauge stainless steel. The purpose of this study was to evaluate the change of root canal prepared by Ni-Ti rotary and stainless steel instruments. Thirty-four single rooted teeth of similar shape and canal size were divided into three groups. The teeth were scanned by computed tomography before instrumentation. In group 1, canals were instrumented using a step-back technique with K-file. In group 2, canals were prepared with K-flex file using the same technique as group 1. Group 3 was prepared with nickel-titanium(Ni-Ti) rotary instrument using a manufacture's instruction. Instrumented teeth were again scanned using computed tomography, and reformated images of the uninstrumented canals were compared with images of the instrumented canals. K-flex file and Ni-Ti file caused significantly less canal transportation than K-file in the 8mm root canal section from the apex(p<0.05). K-flex file and Ni-Ti file produced more centered canal preparation than K-file in the 2mm section(p<0.05). Ni-Ti file maintained more precisely the center of the canal than K-flex file in the 10mm section (p<0.05). There was no difference in the removed volume of canals among each groups.

• The Journal of the Korean dental association
• /
• v.47 no.7
• /
• pp.444-454
• /
• 2009

The purpose of this study was to compare the shaping abilities of LightSpeed, ProTaper-Universal, and hybrid technique using S-series of ProTaper-Universal and LigthSpeed. The 72 simulated root canals of J-shape were used and classified as flowing 3 groups according to the instrumentation methods; Group P of 24 canal blocks were prepared with ProTaper-Universal, Group L was prepared with LightSpeed, and Group H was prepared with hybrid technique (initial shaping with ProTaper-Universal SI and S2 and apical shaping with LightSpeed from #25 to #50). A second-year resident of Endodontic department prepared the resin block canals to apical size #50 (F5 in Group P). The time lapses for instrumentation and the reduction of root canal curvature after shaping were measured. The pre- and post-instrumented root canals were scanned and superimposed to evaluate and calculate the increased canal width and apical centering ratio. The results were as followings: Group Land H showed significant less instrumentation time than Group P (p < 0.05). The ProTaper system showed greater reduction of root canal curvature and working length diminishment than other methods (p < 0.05). LightSpeed system showed best canal curvature preserving characteristics. The Group P had greater instrumented widths at all levels examined (p < 0.05). Group L and Group H showed lower centering ratio (ability to preserve the canal center; the lower ratio means the better canal center preservation) than Group P (p < 0.05). Group H had the lowest centering ratio at the 1 mm level.

• Restorative Dentistry and Endodontics
• /
• v.47 no.2
• /
• pp.19.1-19.15
• /
• 2022

Objectives: The aim of this study was to evaluate and compare the apical constriction (AC) and apical canal morphology of maxillary first and second molars, using micro-computed tomography (micro-CT). Materials and Methods: The anatomical features of 313 root canals from 41 maxillary first molars and 57 maxillary second molars of patients with known age and sex were evaluated using micro-CT, with a resolution of 26.7 ㎛. The factors evaluated were the presence or absence of AC, the morphotypes, bucco-lingual dimension, mesio-distal dimension, and the profile (shape) of AC and the apical root canal. The apical root canal dimensions, location of the apical foramen (AF), AC to AF distance, and presence of accessory canals in the apical 5 mm were also assessed. Descriptive and analytical statistics were used for data evaluation. Results: AC was present in all 313 root canals. Patients' age and sex did not significantly impact either AC or the apical canal dimensions. The most common AC morphotype detected was the traditional (single) constriction (52%), followed by the parallel (29%) morphotype. The mean AC dimensions in maxillary first molars were not significantly different from those in maxillary second molars. Sixty percent of AF were located within 0.5 mm from the anatomic apex. Conclusions: The most common morphotype of AC detected was the traditional constriction. Neither patients' age nor sex had a significant impact on the dimensions of the AC or the apical root canal. The majority of AF (60%) were located within 0.5 mm from the anatomic apex.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.129.2-130
• /
• 2003

Tomato soil pathogens(Phythopthora spp.) analyed high rates in series culture soil and existed in culture parts. To make a diagnosis of Phythopthora sp. and Its concentration, potato slices were manufactured to a round shape(2.5cm) or retangular form(1x4cm). and then, The potato slices dipped into diagnostic reagents with an antibiotic substance for 2∼4hours. Potato slices treated with a few reagents varied into 15cm depths in innoculated soils for 24hrs. Mycelium of the Phytophthora root rot fungus, Phythopthora capsici, were produced easily on potato slice. We collected many potato slice samples on diseased fields in various area. After storage of 24hrs in 20$^{\circ}C$ incubator, White mycelium of Phythopthora sp. formed on potato slice surface. Dilute concentrations of Phythopthora sp. was detected very low contents(1${\times}$10$^1$sporangia/g). But expressing Phythopthora root rots on potato slice did not developed larger lesions upon storage time in room temperature. These results suggest that the use of potato slice in a series of soil cultural system may still serve as efficient means of diagnosis of Phythopthora root rots in the absence of control measures.

• Journal of Drive and Control
• /
• v.13 no.3
• /
• pp.15-23
• /
• 2016

The direct-drive servo valve(DDV) is a kind of one-stage valve because the main spool valve is directly driven by the dc motor. Since the DDV structure is simple, it is less expensive, more reliable, and offers a reduced internal leakage and a reduced sensitivity to fluid contamination. The control system of the DDV is highly nonlinear due to a current limiter, a voltage limiter, and the flow-force effect on the spool motion. The shape of the step response of the DDV-control system varies considerably according to the magnitudes of the step input and the load pressure. The system-design requirements mean that the overshoots should be less than 20%, and the errors at 0.02s should be less than 2%, regardless of the reference-step input sizes of 1V and 5V and the load-pressure magnitudes of 0MPa and 20.7MPa. To satisfy the system-design requirements, the PID-controller parameters of $K_c$, $T_i$ and $T_d$, and the derivative-feedback gain of $K_{der}$ are designed using the root locus and manual tuning.