• The Korean Journal of Pesticide Science
• /
• v.4 no.4
• /
• pp.61-65
• /
• 2000

Effects of temperature, soil moisture level, flooding, and soil microflora on decay of root galls in club root disease of Chinese cabbage were examined in the laboratory. Number of days required for complete decay of root galls was 3 days at $32^{\circ}C$ or higher, 12 days at $16{\sim}20^{\circ}C$ and 28 days at $8^{\circ}C$. As soil moisture content goes up, root gall decay became faster resulting 3 days for complete decay under saturated moisture condition at high temperature of $32^{\circ}C$, and 8 days under the same moisture level at $24^{\circ}C$. Soil moisture effect was relatively low at $24^{\circ}C$ compared to $32^{\circ}C$. Stimulation of decay by soil flooding was not observed at $32^{\circ}C$ but became apparent at $12^{\circ}C$. Influence of soil microflora on root gall decay was negligiable. Based on these results, temperature appears to be the most important factor affecting root gall decay in soil. Root gall decay is thought to be affected more easily by other environmental factors under low temperature conditions. Maturity of resting spores of Plasmodioprora brassicae in root galls tended to increase as time prolongs during root gall decay. Density of the resting spores was lower in fresh root galls where their maturity was also low as compared to completely decayed root galls. Number of resting spores in completely decayed root gall was $6.5{\times}10^{6}/g$ tissue and its maturity was over 95%.

• Journal of Ecology and Environment
• /
• v.32 no.3
• /
• pp.159-165
• /
• 2009

The purpose of this study was to investigate the effects of thinning on fine root biomass and vertical distribution. and litterfall amount in a 50 year old Pinus koraiensis plantation in Chuncheon, Kangwon Province. Fine root (< 2 mm in diameter) biomass ($367\;g/m^2$) in the site 'OC_75', thinning once in 1975, was 68% of those in the site 'CON', no thinning after planting, and in the site 'TC_00', thinning twice in 1975 and 2000. There were no significant differences of dead roots among treatments. Diameter $0{\sim}1\;mm$ roots were vertically decreased only in the TC_00 site. The litterfall was very similar between OC_75 ($5.2\;Mg\;ha^{-1}\;yr^{-1}$) and TC_00 ($4.7\;Mg\;ha^{-1}\;yr^{-1}$), but the composition of litterfall was different: The proportion of leaves and branches was 80% and 13% in OC_75 and 56% and 36% in TC_00, respectively. Reduction of P. koraiensis density by thinning decreased leaf litter as well as fine roots of P. koraiensis, but increased fine roots production by neighboring understory plants offset the reduction of fine roots of P. koraiensis. We suggest that belowground as well as aboveground responses, including both over- and understory vegetation, should be considered to measure the responses of trees in thinned forest ecosystems.

• Communications for Statistical Applications and Methods
• /
• v.31 no.3
• /
• pp.349-363
• /
• 2024

Compositional data refers to data where the sum of the values of the components is a constant, hence the sample space is defined as a simplex making it impossible to apply statistical methods developed in the usual Euclidean vector space. A natural approach to overcome this restriction is to consider an appropriate transformation which moves the sample space onto the Euclidean space, and log-ratio typed transformations, such as the additive log-ratio (ALR), the centered log-ratio (CLR) and the isometric log-ratio (ILR) transformations, have been mostly conducted. However, in scenarios with sparsity, where certain components take on exact zero values, these log-ratio type transformations may not be effective. In this work, we mainly suggest an alternative transformation, that is the square-root transformation which moves the original sample space onto the directional space. We compare the square-root transformation with the log-ratio typed transformation by the simulation study and the real data example. In the real data example, we applied both types of transformations to the USG% data obtained from NBA, and used a density based clustering method, DBSCAN (density-based spatial clustering of applications with noise), to show the result.

• Journal of Korean Society of Forest Science
• /
• v.57 no.1
• /
• pp.26-31
• /
• 1982

The hybrid poplar, populus alba ${\times}$ P.glandulosa $F_1$ shows a strong ability to produce root suckers. The relationship between crown density and root sucker was studied and the other factors that may be related to production of root sucker were also discussed. The possibility was also discussed to use its root suckers for fuelwood forests and vegetation in the area that erosion control is needed.

• Korean Journal of Medicinal Crop Science
• /
• v.10 no.5
• /
• pp.353-365
• /
• 2002

This study was conducted to investigate the effect of cultural methods(cutting, flower removal) on growth and quality of B. falcatum L. Jeongseon local cultivar collected in Korea and Mishima local cultivar introduced from Japan were used. Some of the results obtained are as follows; Jeongseon local cultivar showed less stem branches and shoot weight compared to Mishima. However, Jeongseon local cultivar showed tall plant height, high root fresh and dry weight, and high levels of saikosaponin-a and total-saikosaponin, but low saikosaponin-c content than that of Mishima. Both cultivars seeded on March 20 had longer main root, bigger stem diameter, few stem branch, and high saikosaponin-c content compared with those of late seeded one, April 30. Growth characteristics such as plant height, stem diameter, stem branch number, shoot weight, root diameter, root fresh and dry weight, and root branch number were increased in a low planting $density(30{\times}15\;cm)$, but the content of saikosaponin was not affected by planting density. Jeongseon and Mishima cultivars seeded on April 10 with $30{\times}15\;cm$ planting density and April 30 with $30{\times}10\;cm$ planting density contained highest total saikosaponin levels, respectively. However, average root dry weight was not affected by planting time or density in both Bupleurum cultivars. Both cutting and flower removal increased the length of main root, fresh and root weight, and saikosaponin-a, saikosaponin-d and total-saikosaponin in Jeongseon cultivar than that of Mishima. As the harvesting time was delayed, plant height, stem diameter, shoot weight, length of main root, root fresh and dry weight were increased, but content of saikosaponin-a, saikosaponin-d and total-saikosaponin were decreased.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.2
• /
• pp.13-24
• /
• 2016

The safety factor of an infinite slope tends to be analyzed as lower when the effects of root cohesion are not considered into the equation. Thus, it is essential to consider regional characteristics such as root cohesion and crown density in order to obtain a reasonable safety factor value. In this study, The safety factor of the landslide model, both before and after considering crown density and root cohesion, was calculated and a comparative analysis was carried out. The safety factor is increased by the effect of roots cohesion of the analysis results, the amount of increase in safety factor along the inclination of the slope angle has been analyzed with various things, the effect of reinforcing the roots cohesion, slope of the lower angle it was found that the higher the safety factor increase.

• Restorative Dentistry and Endodontics
• /
• v.41 no.1
• /
• pp.22-28
• /
• 2016

Objectives: The goal of this study was to compare the density of gutta-percha root fillings obturated with the following techniques: cold lateral (CL) compaction, ultrasonic lateral (UL) compaction, and warm vertical (WV) compaction. Materials and Methods: Thirty-three extracted mandibular first molars, with two separate mesial canals in each, were selected. After instrumentation, the canals were stratified into three groups based on canal length and curvature, and underwent obturation with one of the techniques. No sealer was used in order to avoid masking any voids. The teeth were imaged pre- and post-obturation using micro-computed tomography. The reconstructed three-dimensional images were analyzed volumetrically to determine the amount of gutta-percha present in every 2 mm segment of the canal. P values < 0.05 were considered to indicate statistical significance. Results: The overall mean volume fraction of gutta-percha was $68.51{\pm}6.75%$ for CL, $86.56{\pm}5.00%$ for UL, and $88.91{\pm}5.16%$ for WV. Significant differences were found between CL and UL and between CL and WV (p < 0.05), but not between UL and WV (p = 0.526). The gutta-percha density of the roots treated with WV and UL increased towards the coronal aspect, but this trend was not noted in the CL group. Conclusions: WV compaction and UL compaction produced a significantly denser gutta-percha root filling than CL compaction. The density of gutta-percha was observed to increase towards the coronal aspect when the former two techniques were used.

• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.281-290
• /
• 2020

The purpose of this study was to determine the optimal planting density for Zelokva serrata plantations. The study sites were located in Gyeongsan (GS) and Sunchang (SC), Korea. One-year-old, bare-root seedlings were planted at densities of 3,000; 5,000; 7,000; and 10,000 trees ha^-1 at the end of March 2015. We measured the root collar diameter and height each September from 2015 to 2019, and then calculated the H/D ratio and stem volume. The root collar diameter and height increased with increased planting density, and the stem volume was significantly higher at 10,000 trees ha^-1 than those at the other planting densities. Planting density did not affect the survival rate or H/D ratio. The root collar diameter, height, and stem volume were higher in GS than those in SC five years after planting. This study highlights that early growth performance was improved at increased planting densities at both sites. This study suggests that the initial planting density of 10,000 trees ha^-1 is suitable to improve the early growth performance of Z. serrata plantations, and that the improved growth performance at higher planting densities may be a silvicultural characteristic of Z. serrata.

• The korean journal of orthodontics
• /
• v.53 no.3
• /
• pp.205-216
• /
• 2023

Objective: To investigate changes in the immature teeth of Sprague-Dawley rats during orthodontic treatment and to explore the changes in the peri-radicular alveolar bone through micro-computed tomography (CT). Methods: Twenty-five 26-day-old male Sprague-Dawley rats were included. The maxillary left first molar was moved mesially under a continuous force of 30 cN, and the right first molar served as the control. After orthodontic treatment for 7, 14, 21, 28, and 42 days, the root length, tooth volume, and alveolar bone mineral density (BMD) around the mesial root were measured through micro-CT. Results: The immature teeth continued to elongate after application of orthodontic force. The root length on the force side was significantly smaller than that on the control side, whereas the differences in the volume change between both sides were not statistically significant. Alveolar bone in the coronal part of the compression and tension sides showed no difference in BMD between the experimental and control groups. The BMD of the experimental group decreased from day 14 to day 42 in the apical part of the compression side and increased from day 7 to day 42 in the apical part of the tension side. The BMD of the experimental group decreased in the root apex part on day 7. Conclusions: The root length and volume of immature teeth showed continued development under orthodontic forces. Alveolar bone resorption was observed on the compression side, and bone formation was observed on the tension side.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.2
• /
• pp.95-98
• /
• 2023

Purpose: The precision error of a bone density meter reflects the equipment and reproducibility of results by an examiner. Precision error values can be expressed as coefficient of variation (CV), CV%, and root mean square-SD (RMS-SD). The International Society for Clinical Densitometry (ISCD) currently recommends using RMS-SD as the precision error value. When a 95% confidence interval is applied, the least significant change (LSC) value is calculated by multiplying the precision error value by 2.77. Exceeding the LSC value reflects a significant difference in measured bone density. Therefore, the LSC value of a bone density equipment is an essential factor for accurately determining a patient's bone density. Accordingly, we aimed to calculate the LSC value of a bone density meter (Lunar iDXA, GE) and compare it with the value recommended by the ISCD. We also assessed whether the value measured by the iDXA equipment was below the LSC value recommended by ISCD. Material and Methods: The bone densities of the lumbar spine and thighs of 30 participants were measured twice, and the LSC values were calculated using the precision calculation tool provided by the ISCD (http://www.iscd.org). To check the reproducibility of the measurement, patients were asked to completely dismount from the equipment after the first measurement; the patient was then repositioned before proceeding with the second measurement. Results: The LSC values derived using the CV% values recommended by the ISCD were 5.3% for the lumbar spine and 5.0% for the thigh. The LSC values measured using our bone density equipment were 2.47% for the lumbar spine and 1.61% for the thigh. The LSC value using RMS-SD was 0.031 g/cm² for the lumbar spine and 0.017 g/cm² for the thigh. Conclusion: that the findings confirm that the CV% value measured using our bone density meter and the LSC value using RMS-SD were maintained very stably. This can be helpful for obtaining accurate measurements during bone density follow-up examinations.