• The Plant Pathology Journal
• /
• v.20 no.2
• /
• pp.81-84
• /
• 2004

Branched broomrape (Orobanche ramosa) is a holo-parasitic flowering plant that attaches to the root of its host, green plant, by means of a specialized structure known as haustorium. Following successful contact and penetration on susceptible plant root, complex tissue of Orobanche cells is formed which is known as the tubercle. Newly formed tubercles contain high activity ofindole-3-acetic acid (IAA). Triiodobenzoic acid (TIBA), as an inhibitor of IAA polar transport, was utilized to investigate the supply and requirement of auxin to the developing O. ramosa on tomato plant. There was no significant reduction in the incidence of O. ramosa per pot of different TIBA treatments. However, infection severity in terms of the number of O. ramosa shoots that emerged per plant and number of attachments per plant root system were significantly reduced by 60 % and 45 % on TIBA treated plants, respectively. Histo-logical studies revealed conspicuous delay in the initiation of xylem vessel differentiation inside tubercles of the TIBA treated tomato plants. Also, differentiated vessels showed thinner secondary wall deposition, and improper alignment within bundles inside those tubercles. They were wider and shorter in diameter in comparison to those of untreated plants. These findings were attri-buted to the short supply of IAA required for normal development, and to the xylem vessel differentiation of O. ramosa tubercles on infected tomato. Hence, this parasitic flowering plant seems to depend upon its host in its requirements for IAA, in a source to sink relation-ship.

• Journal of Pharmacopuncture
• /
• v.15 no.2
• /
• pp.7-10
• /
• 2012

Objectives: The root of Lithospermum erythrorhizon Sieb. et Zucc. (Lithospermi Radix, LR) is a kind of heat clearing and blood cooling medicinal herbs. It can clear away heat and cool the blood, reduce toxins and disperse maculae. LR has long been used as efficacious therapy for inflammation, burns, frostbite and skin diseases such as eczema and psoriasis. Methods: In the present study, we investigate anti-allergic and anti-inflammatory effects of LR by using the 1-fluoro-2, 4- dinitrofluorobenzene (DNFB)-induced contact dermatitis mouse model. Results: Topical application of 10 mg/mL of LR effectively inhibited skin lesions induced by repeated paintings with DNFB. Topical application of LR also inhibited hyperplasia, edema, spongiosis and infiltrations of mononuclear cells. In addition, production levels of total immunoglobulin and IgG1 in serum were decreased by using LR in vivo. Conclusions: These data suggest that LR acts as an antiinflammatory agent, improving skin lesions in CD mice.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.533-538
• /
• 2003

It has been shown that ion implantation produces remarkable improvements in surface-sensitive physical and chemical properties as well as other mechanical properties, in polymers. In this study, ion implantation was performed onto polymer, PC(polycarbonate), in order to investigate surface hydrophilic property through contact angle measurement using distilled water. PC was irradiated with N, Ar, Xe ions at the irradiation energy of $20\;{\sim}\;50keV$ and the dose range of $5{\times}10^{15},\;1{\times}10^{16},\;7{\times}10^{16}\;ions/cm^2$. The contact angle of water has been reduced with increasing fluence and ion mass but increased with increasing implanted energy. The changes of chemical and structural property are discussed in view of infrared spectroscopy and FT-IR, XPS, which shows increasing C-O bonding and C-C bonding. The root mean square of surface roughness examined by means of AFM changed smoothly from 0.387nm to 0.207nm and the change of wettability was discussed with respect to elastic and inelastic collisions obtained as results of TRIM simulation. It was found that wettability of the modified PC surface was affected on change of functional group and nuclear stopping or linear energy transfer(LET, energy deposited per unit track length per ion) that causes chain scission by displacing atom from polymer chains, but was not greatly dependant on surface morphology.

• Restorative Dentistry and Endodontics
• /
• v.45 no.4
• /
• pp.47.1-47.11
• /
• 2020

Objectives: The aim of this study was to assess the physicochemical properties, cytotoxicity and penetration into dentinal tubules of ChlorCid^TM Surf (3% sodium hypochlorite [NaOCl] with surfactant) in comparison to ChlorCid^TM (3% NaOCl without surfactant). Materials and Methods: The physicochemical properties evaluated were pH, surface tension, free available chlorine (FAC) and contact angle. Cytotoxicity was evaluated in L929 fibroblasts exposed to the solutions by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide and neutral red assays. Assessment of penetration into dentinal tubules was performed by staining single-rooted permanent human teeth with crystal violet (n = 9), which were irrigated with the solutions and analyzed in cervical, middle and apical segments. Data were analyzed by one-way analysis of variance (ANOVA) and Tukey's post-test, 2-way ANOVA and Bonferroni's post-test or t-test (α = 0.05). Results: ChlorCid^TM Surf and ChlorCid^TM FAC values were close to those indicated by the manufacturer. ChlorCid^TM Surf showed lower surface tension and contact angle on dentin, and higher pH than ChlorCid^TM (p < 0.05). The penetration of ChlorCid^TM Surf was higher in cervical and middle segments, compared with ChlorCid^TM (p < 0.05). There was no difference in irrigant cytotoxicity (p > 0.05). Conclusions: ChlorCid^TM Surf showed lower surface tension, lower contact angle on root canal dentin, higher penetration into dentinal tubules and more alkaline pH, compared with ChlorCid^TM. However, both solutions showed similar cytotoxicity and FAC content.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.

• Proceedings of the KACD Conference
• /
• 2001.05a
• /
• pp.247-251
• /
• 2001

;A dental developmental anomaly is defined as an isolated aberration in tooth form, caused by a disturbance or abnormality which occurred during tooth development. There are numerous types of dental anomalies, and a considerable variation in the extent of the defects occurs with each type. Teeth with these anomalies pose unique challenges. Since the defects are not always apparent clinically, they can confuse diagnosticians investigating the etiology of pulpal pathosis. When endodontic treatment is required, the defects often hinder access cavity preparation and canal instrumentation. Treatment planning also becomes more challenging, since the defects can create complicated periodontal problems, and the malformed teeth can be difficult to restore, particularly those weakened by endodontic therapy. Fusion is defined as the joining of two developing tooth germs resulting in a single large tooth structure. The incidence of fusion is < 1% in the Caucasian population, and it is believed that physical force or pressure produces contact of the developing teeth. Clinically and radiographically, a fused tooth usually appears as one large crown with at least partially separated roots and root canals. There may be a vertical groove in the tooth crown delineating the originally separate crowns. Dens invaginatus is a deep surface invagination of the crown or root that is lined by enamel. Teeth in both maxillary and mandibular arches may be affected, but the permanent maxillary lateral incisor is the tooth most commonly involved. Studies have revealed an incidence ranging from 0.25% to as high as 10%. The invagination ranges from a slight pitting to an anomaly occupying most of the crown and root. The invagination frequently communicates with the oral cavity, allowing the entry of irritants and microorganism either directly into pulpal tissues or into an area that is deparated from pulpal tissues by only a thin layer of enamel and dentin. This continuous ingress of irritants and the subsequent inflammation usually lead to necrosis of the adjacent pulp tissue and then to periapical or periodontal abscesses. If the invagination extends from the crown to the periradicular tissue and has no communication with the root canal system, the pulp may remain vital. Recommended treatment of fused tooth and dens invaginatus has been reported in the endodontic literature. This case report describes the endodontic treatment of a maxillary laterl incisors having fused crown and dens invaginatus.natus.

• MALSORI
• /
• no.37
• /
• pp.1-12
• /
• 1999

In this paper, we examine the allophones of an underlying segment /l/ in Korean dialects. In particular, we examine how an underlying /l/ sound surfaces in the Korean dialect spoken at Yonbyon, China. To do so, we employ the following processes: First, we perform the phonetic studies on the allophones of an underlying /l/ in the Yonbyon dialect. Secondly, we compare the phonological environments of the allophones of an underlying /l/ in the Yonbyon dialect with the South Korean dialect. Finally, we discuss the phonological implications of the allophones of the underlying /l/ in terms of Feature Geometry and Syllable Contact Law. Based on the phonetic study, we will argue that the distinctive feature [sonorant] should be placed outside the root node and that the flap, an allophone of an underlying /l/, should be understood as an obstruent, not a sonorant.

• The korean journal of orthodontics
• /
• v.7 no.1
• /
• pp.23-29
• /
• 1977

A 23 year-old female with skeleto-dentoalveolar protrusion of maxilla, minor broken contact points between anterior teeth, and missing of lower 1st molars, has been treated with multibanded edgewise technique. After treatment of 14 months, she has gained functional overbite-overjet relationship and facial harmony due to the retraction of upper anterior teeth. Root resorption was slight. Especially, us ing the space of missed lower 1st molars instead of extracting lower premolars, expected and favorable results were obtained.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.288-297
• /
• 1990

The method of analyzing flexible mechanisms with clearances was studied considering flexibility of beams in the mechanism using finite elements. Both ends of a beam were modeled as free following Dubowsky's impact pair model. Instead some force constraints were imposed at imposed at the connections between adjoining links. Coulomb model has been developed using dry frictions in place of tangential damping forces in the impact pair model and the contact compliance and damping coefficient approximated in a form of root function were used. As examples, impacts of a rigid ball in a cylinder, impact beam model and four-bar mechanisms made up of three flexible links with clearance connections were simulated numerically. The results from examples showed similar but a little bit smaller magnitude of impact forces compared with published studies.

• Communications of the Korean Mathematical Society
• /
• v.18 no.2
• /
• pp.263-280
• /
• 2003

We prove weighted L$^{p}$ estimates with respect to the non-isotropic norm for the (equation omitted)-equation on real ellipsoids, where weights are powers of the distance to the boundary. The non-isotropic norm is smaller than the usual norm, by a factor which is equal to the distance to the boundary in the complex tangential component and which is equal to the m-th root of the distance to the boundary in the complex normal component. Here n is the maximal order of contact of the boundary of the real ellipsoid with complex analytic curves.