• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.10 no.1
• /
• pp.70-74
• /
• 2014

An Operating Experience Report(OER) has written about events and accidents happened at a Nuclear Power Plant(NPP). The purpose of publishing the OER is to prevent the similar event or accident repeatedly by spreading the experience of a single plant to other plants personnel. In this paper, it is analyses that the foreign NPPs' OERs on JIT published by the International Nuclear Agency(WANO, INPO, COG, BE). The analysis introduced in this paper is performed along with the various factors such as type of work, root-cause, and equipment. The root-cause analysis about the OERs shows that the Human-error is the major factor in foreign NPPs, but on the other hand equipment problem is the main part of the Domestic NPPs. The ratio of the foreign NPP's OERs on JIT according to the type of work was applied to KHNP-JIT developed nowadays for the first time in KOREA.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.9 no.1
• /
• pp.35-39
• /
• 2013

The Operating Experience Report(OER) has written about the event and accident happened at a Nuclear Power Plant(NPP). The purpose of publishing the OER is to prevent the similar event or accident repeatedly by spreading the experience of a single plant to other plants personnel. Before initiating the analysis mentioned in this paper, 2,298 review reports for the same number of OER published from 2007 to June 2012 have been written to achieve the correct and objective statistics. The analysis introduced in this paper is performed with the various factors such as year, plant type, equipment, type of work, root-cause. The root-cause analysis is showed that the equipment problem is the major factor in domestic NPPs, but on the other hand human-error is the main part of the foreign NPPs. Moreover, while the number of the man-made event is decreasing, the equipment-made event is rapidly increasing in domestic NPPs.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.4
• /
• pp.776-780
• /
• 1997

Patient with alveolar abscess due to dental caries with severe alveolar bone loss, severe tooth mobility, root resorption need extraction of tooth because it is impossible to carry out pulp treatment and restoration by using conventional method. Early loss of primary molar might cause masticatory interference, extrusion of opposing tooth, problem in maintaining space and interference on eruption of permanent tooth. Especially, early loss of primary second molar before the eruption of permanent first molar might cause space closure by mesially erupted permanent first molar and impaction of second premolar. In such a case, distal shoe space maintainer and removable space regaining appliance was the first choice of treatment. But, distal shoe space maintainer need precise adaptation and might cause chronic inflammation if the oral hygiene is poor. In a case using removable space regaining appliance, patient's cooperation is most important. If the distal root of primary second molar is comparably sound and alveolar abscess with alveolar bone loss is localized at mesial root, hemisection should be carried out for precise guide to eruption of the permanent first molar, restoration of masticatory fuction and solution to the discomfort of the patient

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.131-136
• /
• 2006

In constructing projects, there exist various kinds of work interferences, which cause a delay of the outset and completion of planned schedule because of some attributions, such as variability, uncertainty and complexity. and so schedule delay has been treated as a natural phenomenon. To reduce or prevent the schedule delay, a constant confirmation of schedule delay and a preparation of counter plans for finding out the cause structure of schedule delay should have been done. However, all this time the research has been mostly done on the calculation method or claim cases of schedule delay. Moreover, the analysis method did not consider the trait, which cause the schedule delay, in constructing projects. This paper restricts the range of the cause analysis of schedule delay to the field of site management in the projects and divides the cause structure of schedule delay into the cause objects and cause attributes of schedule delay according to the input elements. The system of classifying causes of schedule delay is examined by interviews with experts and questionnaire. Additionally, this paper analyzes the attributes of cause attributes and cause subjects and presents the analysis method and procedure of schedule delay with the application of VSM.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.2
• /
• pp.68-75
• /
• 2018

A flare from an Air Force fighter was abnormally dispensed during the landing. To determine the cause of the abnormal dispensing, fracture analysis, signal analysis and reproduction experiments based on physics of failures were performed. The primary cause of the failure was analyzed to be due to an intermittent fault of an internal circuit card in the AN/ALE-40 chaff/flare dispenser by a broken lid of a capacitor, and the root cause which had derived the primary cause was considered to be an improper handling during the domestic maintenance which were changed from the overseas maintenance due to the DMSMS problem. Therefore, the overall process of the maintenance capability development system was reviewed and alternative ways that considers maintenance error decision aid(MEDA) for system improvement were suggested to prevent further failures.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1792-1797
• /
• 2007

This paper try to find root-cause of failure in a connector used in transmitting signals for throttle body control in automotives by analyzing possible failure causes and performing experiments to simulate the cable failure in field. The connector comprises fins, wires, and case moldings. The failure is due to degradation of initial clamping force required fixing fins and wires in the connector. Expansion and compression of the case molding material surrounding fins would cause the degradation. Investigations of strict initial claming force and control of thermal expansion property of the molding are required to prevent the failure.

• Research in Plant Disease
• /
• v.14 no.1
• /
• pp.76-78
• /
• 2008

During the investigation of Allium decline in Pohang, Korea, root-knot nematode was found from root of Allium tuberosum Roth. It was identified as Meloidogyne incognita and was first reported from Allium tuberosum. Allium decline was associated with root-knot nematode, root mite and Fusarium sp. but root-knot nematode appeared to be the main cause of Allium decline.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.267-270
• /
• 2011

Root-knot nematodes cause a significant damage on fruit yield and quality of green house growing crops. To asses the effect of eggplant rootstock, Torvum vigor', TaibyouVF' and 'Daitaro' were grafted on eggplants(Solanum melongena cv. Chookyang) and planted in root-knot nematode infested microplot in green house and compared their fruit yield, quality and plant growth with non-grafted control. Eggplant grafted with Torvum vigor had the highest fruit yield and top growth and followed by Daitaro. Non-grafted eggplant had lower yield but had higher root weight because of heavy root-knot nematode infection. Rootstock grafting in eggplant farming is a good alternative technique in root-knot nematode infested green houses without compromising fruit yield and can be applied instantly as organic farming practice.

• Journal of Korean Dental Science
• /
• v.9 no.2
• /
• pp.63-68
• /
• 2016

Pressure root resorption can be observed during the eruption of permanent dentition, especially of the maxillary canines (affecting lateral incisors) and mandibular third molars (affecting mandibular second molars). Since the cause of root resorption of the adjacent affected teeth is evident, treatment simply involves extraction of the impacted tooth. However, there have been few reports on the prognosis of the remaining resorbed tooth, as dentists often choose to extract them when damage due to root resorption is observed. We report a case involving a tooth that was severely resorbed due to pressure from an adjacent impacted tooth. After extraction of the impacted tooth, the remaining tooth retained vital pulp and survived as a functional tooth.

• The Journal of the Korean dental association
• /
• v.57 no.7
• /
• pp.392-402
• /
• 2019

The most important part of everyday root canal treatment is diagnosis about the morphology of tooth, root and root canal. Usually this procedure is performed by visual examination and radiographic (panoramic/periapical) examination. However, 2-dimentional radiography has several limitations such as imposition of anatomic structures including buccal/lingual root canals and distortion of images. Recently, owing to the increased interest in dental implant and affordable cost of CBCT equipment, CBCT has been introduced widely in local dental clinics. CBCT is characterized by their lower radiation dose and shorter exposure time than conventional CT scan, and ability of 3-dimentional reconstruction of the dento-alveolar structure. Also in endodontic field, the data from CBCT could be very helpful in diagnosing complex root canal anatomy, apical periodontitis, cause of failure and in determining treatment plan. However, there are some limitations such as radiation dose and artifact. Therefore, clinicians should know about indication, advantages and limitations of CBCT, and properly use it for successful root canal treatment to save the natural teeth.