• 대한인간공학회지
• /
• 제24권2호
• /
• pp.17-24
• /
• 2005

The objective of this study is to examine the prevalence of musculoskeletal disorders(MSDs) among nursing personnels. A self-reporting survey adapted from Nordic questionnaires was used as diagnostic tool, and conducted for 162 nurses working for a general hospital. The survey was performed five times every three months during a year. The MSDs were defined by using three criteria, depending upon the frequency, duration and pain intensity of the symptoms. The results showed that the 12-month prevalences of MSDs at any body site by criterion 1, 2, 3 were 56.8%, 53.7%, 45.7%, respectively, and that the shoulder was the most susceptible to MSDs, followed by knee/lower leg, lower back, hand/wrist, neck, ankle/feet, finger, etc. Only one statistically significant risk factor of departments or units was identified through the Chi-square test. The prevalence of MSDs was the highest in intensive care unit, second in surgical ward, while the prevalence was the lowest in emergency room. The MSDs prevalence of Korea at any body part or by body part was much lower than that of foreign countries such as Japan, USA, Sweden, etc. This implies that when considering poor working conditions and load in Korea, the incidence rate of MSDs may rapidly increase in Korea in the future.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.179-182
• /
• 1997

In a training simulator for power plant, operator's action in the MCR(Main Control Room) are given to plant process and computer system model as an inputs, and the same response as in real power plant is provided in real time. Inter-process communication and synchronization are especially important among various inputs. In the plant simulator, to simulate the digital control system such as FOXBORO SPEC-200 Micro control system, modification and adaptation of control card(CCC) and its continuous display station(CDS) is necessary. This paper describes the modeling and simulation of FOXBORO SPEC-200 Micro control system applied to Younggwang nuclear power plant unit #3 & 4, and its integration process to the full-scope replica type training simulator. In a simulator, display station like CDS of FOXBORO SPEC-200 Micro control system is classified as ITI(Intelligent Type Instrument), which has a micro processor inside to process information and the corresponding alphanumeric display, and the stimulation of ITI limits the important functions in a training simulator such as backtrack, replay, freeze and IC reset. Therefore, to achieve the better performance of the simulator, modification of CDS and special firmware is developed to simulate the FOXBORO SPEC-200 Micro control system. Each control function inside control card is modeled and simulated in generic approach to accept the plant data and control parameter conveniently, and debugging algorithms are applied for massive coding developed in short period.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.465-466
• /
• 2009

Dye-sensitized Solar Cell (DSC) is a new type of solar cell by using photocatalytic properties of $TiO_2$. The electric potential distribution in DSCs has played a major role in the operation of such cells. $TiO_2$ thin films were deposited on the ITO substrate by Nd:YAG Pulsed Laser Deposition(PLD) at room temperature and post-deposition annealing at $500^{\circ}C$ in flowing $O_2$ atmosphere for 1hour. The structural properties of $TiO_2$ thin films have investigated by X-ray diffraction(XRD). We manufactured DSC unit cells then I-V and efficiency were tested by solar simulator.

• Child Health Nursing Research
• /
• 제26권3호
• /
• pp.376-384
• /
• 2020

Purpose: This study aimed to determine the influence of a breastfeeding coaching program (BCP) for mothers of late preterm infants (LPIs) on the breastfeeding rate and neonatal morbidity within 1 month after discharge. Methods: This was a non-randomized quasi-experimental study with a time series design. The participants were 40 LPIs and their mothers who were hospitalized in a neonatal intensive care unit at a university hospital. Nineteen LPIs were assigned to the control group, and 21 to the experimental group. The mothers of the LPIs in the experimental group received the BCP once on the discharge day and then once a week for 1 month. Neonatal morbidity was defined as an outpatient department or emergency room visit due to an LPI's health problem. Results: The breastfeeding rate in the experimental group was significantly higher than in the control group at the fourth week after discharge (χ²=7.17, p=.028). Five and two LPIs in the control group and the experimental group, respectively, visited a hospital due to neonatal jaundice. Neonatal morbidity was not significantly different between the two groups (χ²=1.95, p=.164). Conclusion: The BCP was useful for improving the breastfeeding rates of LPIs and may have potential to reduce neonatal morbidity.

• 재활간호학회지
• /
• 제10권1호
• /
• pp.21-28
• /
• 2007

Purpose: This study was to examine the effects of auricular acupressure therapy on insomnia of hemodialysis patients. Method: The subjects were recruited at a hemodialysis room in B General hospital in Kyonggi-Do. Thirty one patients who have suffered from insomnia were conveniently assigned to an experimental group(n=16) and a control group(n=15). The experimental group received a 2-week intervention composed of a series of six auricular acupressure therapy every 2~3 days. The effect of intervention was measured by completion of a 15-item sleep scale and a sleep satisfaction scale. Result: The sleep score was higher in the experimental group than in the control group(p=.000). The sleep satisfaction score was higher in the experimental group than in the control group(p=.000). Conclusion: The auricular acupressure therapy can improve the sleep and sleep satisfaction scores in hemodialysis patients with insomnia. Auricular acupressure therapy can be used at the clinical settings as a safe and effective independent nursing intervention to decrease insomnia in hemodialysis patients.

• 에너지공학
• /
• 제11권3호
• /
• pp.254-261
• /
• 2002

The fabrication method for the main components of the polymer electrolyte membrane fuel cell stack such as electrodes, membrane-electrode assemblies, and bipolar plates was established for the effective electrode area of 240 ㎠. A counter-flow type 100-cell stack was fabricated by using the above components and then a maximum power of 7.44 kW for H$_2$/O$_2$ and 5.56 kW for H$_2$/air could be obtained at 70$\^{C}$ and 1 atm. It was seen that the distribution of the OCV for unit cells in the stack was uniform but the voltage deviation increased as the load increased due to the IR drop and the electrode polarization. The stack was applied to the power source of the fuel cell/battery hybrid electric golf car. It produced about 1 kW at a room temperature operation during the test run, which occupied about 43% of the total power required by the 2.3 kW motor.

• 폴리머
• /
• 제27권3호
• /
• pp.169-175
• /
• 2003

무독성의 반응형 난연 도료를 제조할 목적으로 모체수지 1개의 구조단위 속에 2개의 인산기를 보유한 파이로포스포릭 락톤 변성 폴리에스터 (PATT)를 합성하고, PATT에 이소시아네이트인 toluene diisocyanate-isocyanurate를 상온경화시켜 2성분계 폴리우레탄 난연 도료(PIPUC)를 제조하였다. PIPUC로서 도막제작 후 비난연 도료와의 도막물성을 비교한 결과 난연 성분 도입에 따른 난연 도료의 물성이 저하되지 않음을 알았다. 난연성 시험 중 45$^{\circ}$ Meckel burner 법에서는 탄화길이가 3.1~4.4 cm를, LOI법에서는 LOI 27~30%를 각각 나타냄으로써 양호한 난연 효과를 보여주었고, SEM에 의한 표면 도막을 관찰한 결과 도막의 결함이나 상분리 현상이 생기지 않음을 관찰하였다.

• 대한의생명과학회지
• /
• 제22권4호
• /
• pp.115-126
• /
• 2016

Audiometric calibration is a prerequisite for securing the reliability of audiometric test results by checking the internal consistency of the relevant instrument. The purpose of this review is to help instrument operators understand the calibration procedure of aural acoustic immittance instrument which is frequently used for objective assessment. By referring to the latest international standards and the national standards relevant to the aural acoustic immittance instrument, the following parameters will be reviewed: 1) introduction of performance characteristics, 2) detailed procedure of the calibration method. According to the newest international and national standards [IEC 60645-5 (2004), ANSI S3.39-1987 (R2012)], the aural acoustic immittance instrument basically includes six components: 1) calibration cavity, 2) acoustic immittance analysis system, 3) probe assembly/unit and signal, 4) pneumatic air-pressure pump system, 5) acoustic reflex activator system and 6) tympanogram and acoustic reflex plotting system, each of these components should meet set standards. The result of behavioral hearing tests is influenced by various complex factors including the examinee's cooperation, background noise of the examination room, measurement method, skill level of the audiologist and calibration status, but the objective hearing tests is more influenced by the calibration status of the instrument than any other factors. The audiologist should take full responsibility for the reliability of the hearing test result, so he/she should carry out the calibration check and adjustments of aural acoustic immittance instrument periodically and maintain the instrument continuously by referring to the newest standards and the manufacturer's instruction manual.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2004년도 춘계학술발표대회 논문집
• /
• pp.100-105
• /
• 2004

Recently, the assisted living facilities for the elderly are increasing due to the facts, such as rapid increasing ratio of old people, rising incomes and the changing concepts towards family relationship. For the elderly, there is a need to re-examine how environment can incorporate design concepts which enhance accessibility and adaptability. For this survey each seven cases in Korean & American facilities were examined and also 120 copies of a questionnaire for the elderly who are above 60 were analysed. This survey revealed that; 1. The consciousness of the majority elderly was favorably aware of the assisted living facilities for the elderly by a social phenomenon. 2. At a response of the scale for the living unit, majority subjects preferred to live in size of 16${\sim}$20 pyung. 3. Subjects preferred not only clean and modern atmosphere, but also medical area and fitness room, design considerations for these points are needed. 4. Enough spaces for their hobbies and social activities, which are important factors for smooth understanding, communication and psychological remedy effect for the elderly should be provided in the facilities for the elderly. 5.Korean facilities were lack of accessibility, safety and adaptability, thus it is very important to select the suitable materials for the safety and lighting plans with regard to their physical and mental qualities.

• 한국실내디자인학회논문집
• /
• 제24권1호
• /
• pp.169-177
• /
• 2015

The study aimed to classify the types of domestic dormitory furniture, and analyze the characteristics of each furniture type based on the empirical research methodology. The study consisted of literature review and field visit followed by survey and in-depth interview. The researchers collected 140 images of furniture from the web sites of 87 universities. Using affinity diagram, the dormitory furniture was classified into four different types: single fixed type, single semi-fixed type, multi fixed type, and multi semi-fixed type. The finding showed that the use of single fixed type was dominant in the domestic dormitory room, which had competitive price and easy maintenance. Both single fixed type and multi fixed type turned out to be lack of storage space. Meanwhile, both single semi-fixed type and multi semi-fixed type got the high value on the space efficiency due to the multi function. However, these two types could only be applied to a wide space enough for the furniture to be transformed and extended. The study analyzed the main characteristics of the dormitory furniture according to the type classification, and it is expected that this empirical study could work as a medium and database for the upcoming dormitory furniture design studies.