• Journal of architectural history
• /
• v.28 no.4
• /
• pp.7-16
• /
• 2019

In this study, I would like to inquire about the composition of oegi(外機) on the hip and gable roof. Oegi purlin compose the basic member of framework of a hip and gable roof in both sides roof, supporting the inside end of the side rafter. However, the oegi purlin is not simply used to form hip and gable roof. The effects of using oegi purlin have the advantages of spatial. The spatial advantages are the width of the toekan(退間) increases as the oegi purlin escapes from column row and to increase the ceiling height by becoming a point of staying the ceiling. That reflect the desire to expand indoor space due to changes in worship behavior. Oegi purlin was used not only for structural needs, but also for altering in indoor space due to the changing times.

• Steel and Composite Structures
• /
• v.22 no.5
• /
• pp.1039-1054
• /
• 2016

This paper presents the dynamic characteristics analysis of the purlin-sheet roofs by the random vibration theories. Results show that the natural vibration frequency of the purlin-sheet roof is low, while the frequencies and mode distributions are very intensive. The random vibration theory should be used for the dynamic characteristics of the roof structures due to complex vibration response. Among the first 20th vibration modes, the first vibration mode is mainly the deformations of purlins, while the rest modes are the overall deformations of the roof. In the following 30th modes, it mainly performs unilateral local deformations of the roof. The frequency distribution of the first 20th modes varies significantly while those of the following 30th modes are relatively sensitive. For different parts, the contributions of vibration modes on the vibration response are different. For the part far from the roof ridge, only considering the first 5th modes can reflect the wind-induced vibration response. For the part near the ridge, at least the first 12 modes should be considered, due to complex vibration response. The wind vibration coefficients of the upwind side are slightly higher than that of the leeward side. Finally, the corresponding wind vibration coefficient for the purlin-sheet roof is proposed.

• Journal of architectural history
• /
• v.14 no.4 s.44
• /
• pp.87-100
• /
• 2005

We have focused on the roof construction method of Urban Hanok in Bukchon, Seoul. The Urban Hanok, urban traditional housing type, had been evolved In modern context from 1930's to 1960's. We have confused Urban Hanok with traditional Hanok, because they have similar figures. But Urban Hanok have the characteristics as a result of the roof construction method. The purpose of this paper is to define Urban Hanok more concretely, thus we payed attention to the roof structure, specially to the comer that each roof structure meets. So we got some characteristics of the roof construction method of Urban Hanok in Bukchon. First, the roof construction methods of the roof are transformed at the corner parts, where three purlin structure and five purlin structure meet. The collision of the different roof structure has made a lot of types. Second, the roof slope of Urban Hanok is more gentle than traditional Hanok, that is caused by ornamental double eaves and awnings. Finally these characteristics are results of the compact lot size in urban neighborhood. The construction method is a inclusive word that contain materials, composition, ornament and social common sense. With the understanding on the roof construction method of Urban Hanok, we can define the identity and the value of Urban Hanok, And we can suggest the policy and the design guidelines for the reservation and rehabilitation for Urban Hanok of Bukchon, Seoul.

• Structural Engineering and Mechanics
• /
• v.63 no.2
• /
• pp.195-206
• /
• 2017

This paper presents the parametric numerical analysis on the ultimate bearing capacity of the purlin-sheet roofs connected by standing seam clips. The effects of several factors on failure modes and ultimate bearing capacity of the purlins are studied, including setup of anti-sag bar, purlin type, sheet thickness and connection type et al. A simplified design formula is proposed for predicting the ultimate bearing capacity of purlins. Results show that setting the anti-sag bars can improve the ultimate bearing capacity and change the failure modes of C purlins significantly. The failure modes and ultimate bearing capacity of C purlins are significantly different from those of Z purlins, in the purlin-sheet roof connected by standing seam clips. Setting the anti-sag bars near the lower flange is more favorable for increasing the ultimate bearing capacity of purlins. The ultimate bearing capacity of C purlins increases slightly with sheet thickness increasing from 0.6 mm to 0.8 mm. The ultimate bearing capacity of the purlin-sheet roofs connected by standing seam clips is always higher than those by self-drilling screws. The predictions of the proposed design formulas are relatively in good agreement with those of EN 1993-1-3: 2006, compared with GB 50018-2002.

• Journal of architectural history
• /
• v.27 no.2
• /
• pp.39-50
• /
• 2018

This study investigates the types and spread of framed structures of gable roofs meeting at right angle showed in old architecture and documentary paintings of houses, which were well liked in the early Joseon Dynasty. The conclusions of this study were as follows. First, the framed structure of gable roof meeting at right angle can be divided or recognized in 4 types according to their structure's size and purlin's position. Three of those types were noted to be in Seoul. Second, the framed structure of gable roofs meeting at right angle begun from the awareness of their independence from one another. Each space was divided based on their functions. Therefore, it could be extended in various forms, not only in the square plan physique but also in many different forms. And allowed free plan configuration regardless of column layouts or size of structure. Third, 5 purlins and 3 purlins crossing structure were preferred in Han-yang, the early Joseon Dynasty. It is related to the specific construction conditions of urban houses, such as the slope of land, limited land area, and economic power. Fourth, urban housing techniques were diffused throughout the country by officials who lived in Kae-gyeong and Han-yang at the end of Goryeo and early Joseon Dynasty. In other regions, framed structure of gable roof meeting at right angle households decreased, but in some regions of Gyeongsang-province, framed structure of gable roof meeting at right angle has maintained with Staggered purlin.

• Journal of architectural history
• /
• v.28 no.1
• /
• pp.7-16
• /
• 2019

As a part of the research on existing structures of private homes from Joseon Era. Focusing on one hundred twenty five-purlin houses, the current study investigated the features and characteristics of the house structure from style, size, proportion and roof pitch, and measurements of key parts, and developed the following conclusions. Most are single-houses (89, 83%), and among them, there are 47 single front-terrace houses (39%), which is the highest number. The sizes of lower house structure do not differ greatly depending on the vertical structure, and single rear terrace house and double-house have relatively larger side sizes. The size of upper structure is larger in double-houses compared to other vertical structures, indicating a relatively higher roof. The cross-section measurement of major parts show that double-houses are larger than single-houses by 3cm in pillar, 3-4.5cm in crossbeam length, and 4.5cm in crossbeam width. However, Janghyeo width was consistent at 7.5 to 10.5cm, maintaining uniformity regardless of vertical structure of the houses. In addition, the cross-section measurements decreased from sixteenth to nineteenth century, with the size of pillar size decreasing the most. The result that the Janghyeo width is not related to the house structure house confirmed that the Janghyeo width was kept consistent regardless of the size of the house structure.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.22-47
• /
• 2014

This study was to understand the basic principles of the East Asian wooden structure system research and analysis. The Korea and China ancient architecture internal structure research that the combination of girders and crossbeams position. The ancient wooden structures of eastern Asian countries, Korea and China are not much different from each other in the principles of the wooden architecture structure, combining pillars, purlins and crossbeams. However, it seems that age-division, local-division, national-division differs in detail techniques. China ancient wooden structures combination of purlin and crossbeam, and So-seul Timber(Chinese name: Chashou叉手, Tuojiao 托脚) seems to show differences according to the age of the fulcrum position, detailed approach is also different according to various historical dynasty. Before in the 15th century, Purlin and Crossbeam are coupled to each other, but since the 15th century, seems to have developed a technique combined with each other Girder and Crossbeam and to prevent buckling of the Crossbeam cross-sectional area increased dramatically. For Tuojiao in China Tang-Wudai dynasty(A.D. 618~979), can see that saw the top position Girder and Tuojiao no direct coupling, can be seen as maintaining the safety of the material than the material of the inner wooden structures prevent buckling of the purlin. Korea ancient wooden structures of Goryeo dynasty(A.D. 918~1391), So-seul Timber(Chinese name Tuojiao) why do not to use the fashion? To use Purlin Lower backing material techniques to prevent buckling is a popular trend to stable can be thought of as a preferred way to maintain. I think that with universality beyond the local-division, national-division and the two countries since the 15th century of Korea and China ancient wooden structures detailed mechanism for the purlin buckling. In middle-late Chosen dynasty, The effect of Deotgeolyi- techniques and fleeting beams reduce the purlin buckling that reduces the load transmitted from purlin and crossbeam of how to reduce the load on the roof portion of the architecture fleeting beams used, which of craftsmanship of the Chosen Dynasty building can be referred to as another technique for preventing buckling purlin. This Korea and China ancient architecture purlin beam structure and material So-seul Timber study. Seems to be able to provide a basic research study to restore and designed the old wooden architectures.

• Journal of architectural history
• /
• v.4 no.2 s.8
• /
• pp.45-64
• /
• 1995

This study examines the Section of 'Housing Regulations' in The Chronicles of the Three States (${\ulcorner}$三國史記${\lrcorner}$ 屋舍條) to verify the residential architecture during the period of the Unified Silla Dynasty. Through the study, the basic architectural terms in the Section of 'Housing Regulations', such as the size of the building, glazing roof tile, animal-shaped ornamental piece on roof ridge, eave purlin, wooden bracket arms, roof decoration, decorative paintings, stone steps, wall structure, blind screen, folding screen, bedstead, and gate are analyzed, interpreted and defined, and, in addition, the forms and styles of the residential architecture during the period of the Unified Silla Dynasty are basically reconstructed.

• Journal of architectural history
• /
• v.26 no.3
• /
• pp.39-49
• /
• 2017

It is difficult to build a hipped and gable roof in slender rectangular type due to restraint in variation of lateral length caused by gongpo arranged on the side, purlin space and the form of gable part and aesthetical effect of chunyeo maru. Against this backdrop and with the assumption that this phenomenon is more apparent in roofs of three-bay-kan Buddhist temples with the hipped and gable roof among national treasure Buddhist temples, this study has aimed to prove that a roof can be built in a less slender rectangular type than that of flat form and to present the building methodology and found the following findings. First, The ratio of lateral to longitudinal length of the roof has been adjusted by protruding the chunyeo and the method of adjusting the ratio of lateral to longitudinal length of the roof is considered to be determined depending on the availability of woods to be used in chunyeo. Second, in order to symmetrically arrange the edge of the roof, which is critical from the perspective of construction morphology, the chunyeo angle has been intentionally adjusted to reduce the gap of length between the front roof and the lateral roof. To sum up, the characteristic of the hipped and gable roof, which is difficult to be built in slender rectangular type, is more clearly shown in the roof and it is identified that the length of the front roof and the lateral roof has been intentionally adjusted to achieve the symmetrical arrangement of roofline of the roof edge.

• Journal of architectural history
• /
• v.9 no.2 s.23
• /
• pp.7-17
• /
• 2000

The purpose of this study is the analysis of 'perpendicular crossing Dori' with a structural character of Ddeulzip in Andong cultural area. There are many structural methods to solve the problems of Ddeuljip which is connected space in the rectangular type. There are 'Slope Base', 'Woosangak' roof, 'Seosangak' roof, and '4 beam roof framing' Moreover, they have been used 'perpendicular crossing Dori'. Its characters are as follows ; 1. The 'perpendicular crossing Dori' structure is occurred in different depth of width and length space of 'ㄱ' typed plan. At that time the beam of width is crossed in the middle of the beam of length without the order under them. 2. The 'perpendicular crossing Dori' structure is the method of free depth of width in regular distance of column which is different from general usage of balcony order. 3. The 'perpendicular crossing Dori' structure is founded north-western area of Andong Cultural Area(Bonghwa, Andong, Youngju, and Yeacheun). The best old sample was in Andong(16C) and the next is Yeacheun(17C) and the last is Bonghwa(18C). 4. The frequency in use of roof type of 'perpendicular crossing Dori' structure is 64% of 'Seosangak' and 36% of 'Woosangak'. The sample of 'Woosangak' house of 'perpendicular crossing Dori' structure is concentrated in Bonghwa. 5. The best merit of the 'perpendicular crossing Dori' structure is usage of double swing window in front of Anbang, It is the spacial success which overcomes the structural limits. And it is the structural rationality.