• The Journal of Korean Physical Therapy
• /
• v.6 no.1
• /
• pp.23-35
• /
• 1994

In this research, the mentally-handicapped children being able to be trained were investigated the actual condition of train function making 40 mentally-handicapped children in Kummi Hyedang Spacial Education School, to exmine the effect of physical exercise function when training the mentally-handicapped children who can be trained as applying exercise education programs, and trains for 10 weeks by assigning to both experiment group and control group according to children who are similar to training functions from pre-examination. The results are in following: First, the results of test in the exercise ability of mentally-handicapped children with the degree of being able to trained are very delayed in comparison with normal mental children through the both top and bottom examination. The developments of 5 exercise functions classified by domain, have the order of eyesight exercise, softness, physical strength, quickness, parallelism, the interaction of both eye and hand, and, have the exercise function being equal to the level of between 6 and 12 years old. In 13 bottom test, throwing bean-bag is equal to the nomal 12 years old boy. the board jump, sitting position / bending forward / closing are equal to the level of 12 years old boy. standing with only leg is the level of 9 years old, threading pearls is 7 years old, transfering the wood building, picking the upper body up, walking board, balancing one leg with opened, eye, fist / opening palm / palm, bending and opening arm with postrating on chair, are the exercise functions of below 6 years old. Second, there are great effects in carrying out the exercise education program to the mentally-handicapped children with the level of being able to trained. In experiment group, it is elevated to the middle level of 12 years old nomal children. Classified by domain of test the board jump, training, the bean-bag are far higher level than 12 years old normal children, and are elevated the level of 11 years old boy. Balancing only leg with closed eye is below the level of 10 years old boys, fist / opening palm / palm are the level of 9 years old boys. There and back running, picking the upper body is the level of 9 years old girls. Walking board is the level of 8 years old boys. Bending and opening arm with postrating on chair is the level of 7 rears old boy. Balancing one leg with opened eye is elevated to the level of f years old girls. These functions have the more balanced exercise function rather than pre-examination. In control group, they have little change by classified the bottom test, but have the exercise function on the time of pre-examination, go backward in physical strength. quickness. Third, the exercise function being learned by exercise education program on the mentally-handicapped children of the level with being able to train is appeared to maintain continuately. Softness, physical strength, quickness, eyesight training are maintained the learned exercise function, the interaction of both eye and hands, parallelism are delayed a little. Classified by the bottom test. threading pearls, transfering the wood building, throwing the bean-bag, sitting position / rolling forward / reaching, the broad jump and picking upper body up, there and bark running, picking upper body up, balancing with only leg as opened eye, bending and opening arm with postrating on chair, etc. are maintained. Fist / opening palm / palm, balancing with only leg as opened eye are delayed a little. The change of body position is elevated. Seeing these results, it is appeared to the mentally-handicapped children that the exercise education programs, which is suitable their actual condition and acomplishes in voluntary participation, have very positive effect. So, to develop the function of body exercise in mentally-handicapped children with the level of being to able to be trained, the measures must be groped so that the exercise education programs can be practiced positively, and the ,body exercise can be experienced more.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.569-577
• /
• 2014

From the year 2009, 3D Stereoscopic movies and TV have been spotlighted after the huge success of a movie called "AVATAR". Moreover, most of 3D movies & contents are created by mixing real-life shots & virtual animated pictures, such as "Robocop 3", "Transformer 4" as shown in 2014. However, the stereoscopic 3D video film shooting with a traditional stereoscopic rig camera system, takes much more time to set the rig system and adjust the system setting for proper film making which necessarily resulting in bigger cost. In fact, these problems have depreciated the success of Avatar as decreasing demand for 3D stereoscopic video shooting. In this paper, inherent problems of traditional stereoscopic rig camera system are analyzed, and as a solution for the problems, a novel implementations of single-lens optical stereoscopic 3D camera system is suggested. The new system can be implemented to a technology for separating two lights when even those lights passing through in the same optical axis. The system has advantages of adjusting the setting and taking video compared with traditional stereoscopic 3D rig systems. Furthermore, this system can acquire comfortable 3D stereoscopic video because of the good characteristics of geometrical errors. This paper will be discussed the single-lens stereoscopic 3D camera system using rolling shutters, it will be tested geometrical errors of this system. Lastly, other types of single lens stereoscopic 3D camera system are discussed to develop the promising future of this system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.617-623
• /
• 2020

Urban railroad vehicles carry many passengers and are the core of an urban railroad transportation system. Therefore, the dynamic performance of the vehicle must be ensured. Dynamic behaviors such as the vibration and ride comfort of railway vehicles are affected by the structure of the suspension system. We analyzed the dynamic behavior of a railway vehicle according to the suspension system of an urban railway vehicle, which is mainly operated in Korea. For two types of vehicles with different suspension structures, the vibration of the vehicles on railway tracks was measured, and dynamic behavior characteristics such as vibration, ride, and vibration reduction rate were analyzed. The result of the test shows that the vibration performance of the body is superior to that of B-bogie in the lateral direction and that of A-bogie in the vertical direction. Overall, the ride quality of the A-bogie car is superior to that of B-bogie. When analyzing the vibration attenuation rate of primary suspension system, the vibration attenuation performance of B-bogie with coil spring was superior to that of A-bogie with a conical rubber spring. The secondary suspension system has better vibration attenuation performance for A-bogie with air springs compared to coil springs.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.2
• /
• pp.181-191
• /
• 2014

This study aims to evaluate cutter acting forces as well as axial stresses and torques in the shaft of two kinds of disc cutters including a single disc cutter and a double disc cutter with the same cutter ring geometry in a series of linear cutting tests. From the tests, the mean values of normal forces and rolling forces acting on the double disc cutter were approximately twice as high as those from the single disc cutter. Similarly, the mean values of axial stresses in the shaft of the double disc cutter were also twice as high as those from the single disc cutter even though the comparisons of torques from two kinds of disc cutters were insignificant since they showed very low values. However, it is necessary to take the durability of a tapered roller bearing used for the double disc cutter into high consideration since the average normal force from the double disc cutter exceeds the allowable force for a disc cutter with the diameter of 432 mm (17 inches). Finally, there is no practical problem in terms of axial stresses in the shaft of the double disc cutter since they are much lower than the yielding stress of the cutter shaft material, even though the axial stresses in the shaft of the double disc cutter are approximately twice as high as those from the single disc cutter.

• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.591-597
• /
• 2012

For heat exchanger applications, 2-ply clad materials were fabricated by rolling of aluminum (Al) and mild steel sheets. Effects of annealing temperature on interface properties, especially on inter-layer formation and softening of strain hardened mild-steel, for Al/mild steel clad materials, were investigated. To obtain optimum annealing conditions for the Al/mild steel clad materials, annealing temperature was varied from room temperature to $600^{\circ}C$. At the annealing temperature about $450^{\circ}C$, an inter-layer was formed in an island-shape at the interface of the Al/mild steel clad materials; this island expanded along the interface at higher temperature. By analyzing the X-ray diffraction (XRD) peaks and the energy dispersive X-ray spectroscopy (EDX) results, it was determined that the exact chemical stoichiometry for the inter-layer was that of $Fe_2Al_5$. In some samples, an X-layer was formed between the Al and the inter-layer of $Fe_2Al_5$ at high annealing temperature of around $550^{\circ}C$. The existence of an X-layer enhanced the growth of the inter-layer, which resulted in the delamination of the Al/mild-steel clad materials. Hardness tests were also performed to examine the influence of the annealing temperature on the cold deformability, which is a very important property for the deep drawing process of clad materials. The hardness value of mild steel gradually decreased with increasing annealing temperature. Especially, the value of hardness sharply decreased in the temperature range between $525^{\circ}C$ and $550^{\circ}C$. From these results, we can conclude that the optimum annealing temperature is around $550^{\circ}C$ under condition of there being no X-layer creation.

• Journal of Preventive Medicine and Public Health
• /
• v.42 no.1
• /
• pp.21-28
• /
• 2009

Objectives : Whilst hypertension exerts a negative effect on several organs there have been few studies regarding its effect on pulmonary function. The objective of this study was to examine the relationship between hypertension and pulmonary function in rural Korean adults Methods : In 2006, 2534 people were recruited, aged 40 to 70, in Kangwha County. We selected 1454(male: 624, female: 830) participants whose pulmonary function results were repeatable. Blood pressure(BP) was measured twice and the average calculated. Participants were divided into two groups(hypertensive group and non-hypertensive group) in accordance with The Seventh Report of the Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure. Pulmonary function was measured by dry rolling seal spirometry. Forced expiratory volume in the one second and forced vital capacity were converted into percent-predicted values based on average pulmonary function amongst Koreans. Results : The number of hypertensive participants in the present study was 460(male: 205, female: 255) and the number of non-hypertensive participants was 994(male: 419, female: 575). Our findings have shown that the mean values for expiratory volume in the one second and forced vital capacity were significantly lower for hypertensive people than for non-hypertensive people, among women(P=0.002 for forced expiratory volume in the one second, p<0.001 for forced vital capacity volume). Odds ratio analysis revealed that hypertensive participants were more likely to have lower pulmonary function than non-hypertensive participants, again significantly among women. Conclusions : The pulmonary function of hypertensive women was significantly lower than that of non-hypertensive women aged 40-70.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.4
• /
• pp.265-280
• /
• 2021

Population density due to urbanization is making people interested in underground space development and much interest in TBM construction with low vibration and noise. This led to a lot of research on TBM. However, research on the characteristics of the cutterhead opening of the TBM equipment being occluded under the ground conditions under which it is excavated is insufficient. Accordingly, a study was conducted to investigate clogging of the cutterhead opening during the shield TBM rolling. To identify the clogging of cutterhead openings in SHIELD TBM equipment, the reduced model experiment was divided into clay rate (10%, 30%, 50%, 60%), cutterhead opening rate (30%, 50%, 60%), and cutterhead rotation direction (one-way, two-way) and rotational speed (3 RPM) and conducted in 36 cases. Results of scale model test on shield TBM clogging, it was analyzed that the ground condition containing clay soil increased the clogging effect in both directions than the unidirectional rotation, and that the lower the rotational speed of the cutterhead, the less the clogging effect. Accordingly, the direction of cutterhead rotation, rotational speed and opening rate are calculated by taking into account ground conditions during ground excavation, the clogging effect can be reduced. It is believed to be effective in saving air as the clogging effect is reduced. Therefore, this study is expected to be an important material for domestic use of shield TBM.

• Korean Journal of Metals and Materials
• /
• v.50 no.4
• /
• pp.316-323
• /
• 2012

The aim of this study is to investigate the effect of post heat treatment on bonding properties of roll cladded Ti/MS/Ti materials. First grade Ti sheets and SPCC mild steel sheets were prepared and then Ti/MS/Ti clad materials were fabricated by a cold rolling and post heat treatment process. Microstructure and point analysis of the Ti/MS interfaces were performed using the SEM and EDX Analyser. Diffusion bonding was observed at the interfaces of Ti/MS. The thickness of the diffusion layer increased with post heat treatment temperature and the diffusion layer was verified as having $({\epsilon}+{\zeta})+({\zeta}+{\beta}-Ti)$ intermetallic compounds at $700^{\circ}C$ and an $({\zeta}+{\beta}-Ti)$ intermetallic compound at $800^{\circ}C$, respectively. The micro Knoop hardness of mild steel decreased with post heat treatment temperature; however, those of Ti decreased at a range of $500{\sim}600^{\circ}C$ and showed a uniform value until $800^{\circ}C$ and then increased rapidly up to $900^{\circ}C$. The micro Knoop hardness value of the diffusion layer increased up to $700^{\circ}C$ and then saturated with post heat treatment. A T-type peel test was used to estimate the bonding forces of Ti/Mild steel interfaces. The bonding forces decreased up to $800^{\circ}C$ and then increased slightly with post heat treatment. The optimized temperature ranges for post heat treatment were $500{\sim}600^{\circ}C$ to obtain the proper formability for an additional plastic deformation process.

• Korean Journal of Veterinary Service
• /
• v.14 no.2
• /
• pp.87-103
• /
• 1991

The somatic cell counts SCC and bacteria counts were done by D milk plant, P milk plant, S milk plant and Inch'${\v{\times}}n$ Vet. Serv. Lab from 1987 to 1990 with Coulter counter, Fossomatic 90, Bactoscan, Rolling ball viscometer and Resazurin reduction test. The results were summarized as follows 1. In the distribution of SCC of the bulk herd milk, D milk plant from Nov. 1989 to Oct. 1990 remarks 80.2% on the range below 500, 000, 14.5% ranging from 1, 000, 000 to 1, 500, 000, 1.2% ranging from 1, 500, 000 to 2, 000, 000, 0.69% ranging from 2, 000, 000 to 3, 000, 000, 0.71% on the range over 3, 000, 000. P milk plant remarks 237, 000 in the first half year and 251, 000 in the second half year in 1990 year. S milk plant remarks annual average of 335, 000 in 1987, 273, 000 in 1988 and 262, 000 in 1989. The individual record of Inch'${\v{\times}}n$ Vet. Serv Lab. remarks 79.35% and 80.2% below 500, 000 8.30% and 7.40% from 500, 000 to 1, 000, 000, 2.37% and 3.2% from 1, 000, 000 to 1, 500, 000, 2.77% and 2.30% from 1, 500, 000 to 2, 000, 000, 1.67% and 2.00% from 2, 000, 000 to 3, 000, 000, 5.53% and 4.40% over 3, 000, 000 in 1989 and 1990, respectively. The grade distirbution of SCC is as follows: D milk plant shows 1st grade-80.20%, 2nd grade-l6.5% and 3rd grade-3.30%. And P milk plant shows all 1st grade. S milk plant shows 87.30%, 8.6% and 4.1% in 1987 and 91.90%, 6.1% and 2.0% in 1988, and 92.40%, 6.1% and l.5% in 1989 on the 1st, 2nd and 3rd grade respectively. 2. The distribution of bacteria P milk plant reached 15.123 in 1st half year and 21.515 in 2nd half year. Also, S milk plant reached 81.5%, 12.5%, 6.0% in 1987, and 86.20%, 9.70%, 4.1% in 1988, and 86.2%, 10.8%, 3.0% in 1989 respectively for 1st, 2nd and 3rd grade. 3. The regional SCC distribution in D milk plant shows 1, 540, 000 in three regions and 714, 000 in one region. And monthly SCC distribution shows 671, 000 in December and 1, 165, 000 in June. 4. As a result of the individual SCC test, 9 times for 16 cows in “I”farm(1986-1988), and 6 times for 13 cows in“D”farm(1987-1988) No.3, 5, 9, 14 cows in“I”farm showed the high SCC beyond 1, 000, 000 over 4-5times. 5. If the SCC over 300, 000 reach 40%, the national producing quality of milk can be reduced by 87, 600M /I annually and in the sum of money, it should be about 35.5 billion Won. 6. The difference between high group and low group for SCC in D milk plant reached over 1, 000, 000. In case that the difference reaches 1, 000, 000 in the farm bulk milk at a farm breeding 20 cows which produce 20kg milk per day, it was estimate that the annual difference of producing quantity and sum of money respectively should be reached 26, 280kg in milk and 10, 643, 400 Won in income.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.546-553
• /
• 2014

The purpose of this study was to investigate the actual condition of communication of dental hygienist in oral hygiene instruction during scaling. The research was intended for 67 dental hygienists who worked dental hospitals and clinics. Oral hygiene instruction during scaling was audiotaped. Pearson correlation analysis, t-test, one-way ANOVA, and chi-squared test were conducted. The results gained by the research were as follows. An analysis of 67 dental hygienists has found that 63 dental hygienists (94%) educated the patients with dentiform and 65 of them (97%) did rolling method. Thirty-three of them (49.3%) recommended oral care products to the patients. Only 14 of all educators (21%) said simple greetings and educated importance of care of subjects' teeth, side effect of scaling, when they finished all the scaling stage. The average time of oral hygiene education was 161.3 seconds. In detail, the dental hygienists told 155.0 seconds, the patients did 6.3 seconds on average. The percentage of education time without patients' comments and dialogue each other were 35.8% and 37.3% respectively. The conversation frequency according to the education level of dental hygienist showed significant difference (p<0.05). There was a negative correlation between total education time and patients coming for scaling per day and there was a positive correlation between total number of questions and patient talking time. The result of chi-squared test showed that there was significant difference on asking regards depending on setting a limitation of scaling time (p<0.05). The research showed that the dental hygienists seem to educate the patients mechanically, uniformly rather than educate them according to their oral hygiene condition.