• Journal of Biosystems Engineering
• /
• 제12권1호
• /
• pp.20-30
• /
• 1987

Major rice grain losses both in quality and in quantity are incurred in the whitening process which is indispensable in the milling process. Rice whitening it performed by two different whitening actions known as abrasive and frictional. In Korea, abrasive-type whiteners equipped with a emery-stone roller have been adopted in the whitening system in large scale milling plants, but not in customary small scale. However, researches on this type whitener have rarely been conducted in Korea. This study was attempted to establish design criteria or a modified abrasive-type whitener which is aerated with blower. The factors considered in this study were three levels of feedscrew pitch (20, 27, 34 mm) and three levels of clearance(11, 13, 15 mm) between surfaces or emery-stone roller and screen and two levels of moisture content (14.5%, 15.7%, w.b.) of brown rice. Also, the effect of aeration on whitening performance was examined, and a system performance consisting of one pass in the aerated abrasive-type and two passes in the existing friction type was compared with the performance of the existing whitening system consisting of three passes in friction type only. The latter system is prevailed in customery small milling plants. The results of this study are summarized as follows. 1. The interactions between feed-screw pitch and chamber clearance of the aerated abrasive-type whitener had great effect on the performance of the machine. When the value of a nondimensional parameter, $C^2/(P{\cdot}d_p)$, expressing the relations between feed-screw pitch, P, and chamber clearance, C, ranged from 0.40 to 0.45, the performance of the aerated abrasive-type whitener was the best. 2. Aeration to the abrasive-type whitener gave positive effect on milled and head rice recoveries. 3. The whitening system involving the aerated abrasive-type whitener, which has appropriate feed-screw pitch and chamber clearance as described in item 1 above, produced more milled and head rice recoveries by about 1.5% and 2.0%, respectively, than the existing frictional whitening system. The former also consumed less electricity by about 10% (0.9KwH/1000kg).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.209-212
• /
• 1987

This paper presents a control scheme to stabilize a two-axes microwave antenna system which is located on a ship and is subject to roll, pitch and yaw(RPY) motions. The scheme first computes the compensated angular positions of the antenna for RPY disturbances through coordinate transformations, and then use a servo con roller of PID type for each axis to track the compensated position command with a good transient behavior.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2002년도 추계학술발표논문집
• /
• pp.74-80
• /
• 2002

A mathematical tension model for a moving web in a multi-span web handling system was derived and validated by using a simulator which includes unwinder, driven roller, winder, load cells, controllers, etc. A tension controller was designed to compensate tension disturbances generated by velocity changes of the unwinder and driven roller. From experimental results it was proved that the tension model properly expressed the tension behavior of a moving web for specific conditions. The distributed tension controller designed by using the pole-placement technique compensated the tension disturbances transfered from upsteram tension variation. Interactions between web spans including "tension transfer phenomenon" were clearly confirmed through the study. A mathematical model of lateral motion of a moving web was verified also by using the same experimental apparatus which includes displacement type guidance systems. And a feedforward control strategy was designed for more accurate control of the lateral motion of a moving web, which utilize a measured signal of the lateral displacement of web in a previous span and a more correctly identified mathematical model to estimate the disturbance of lateral motion from the previous span. This approach was turned out to be effective in improving the performance of the guidance system for more wide range disturbances.

• Journal of Biosystems Engineering
• /
• 제28권5호
• /
• pp.395-402
• /
• 2003

Standard ginseng seedling, selected after one year's rearing in the seedling bed has been conventionally transplanted in Korea. Recently, the direct seeding areas have been increasing to product high quality ginsengs for red-ginseng processing. Reciprocating push-rod brush, holed-roller and vacuum suction seeders, planting with 30 ${\times}$ 30mm spacings and adjustable to the folds were designed and theirs performances were evaluated. The developed three types of seeders reliably performed at the success rate over 95% with less than 10% in slip rate, and could be used a seeder for the greater spacings by adjusting metering parts. The research concluded that the vacuum suction seeder was the most feasible and practical with the greatest metering success and the least slip among three type seeders of the reciprocating push-rod brush, holed-roller and vacuum suction seeders. The vacuum suction seeder holds a seed with each needle nozzle using the negative pressure created by a vacuum pump. The capacity was 24.5 times greater than a man power at the speed of 5 m/min.

• Journal of Biosystems Engineering
• /
• 제25권5호
• /
• pp.351-358
• /
• 2000

This study was conducted to develop a speed control system of a DC motor which drove a barley seeder mounted on a combine harvester. Barley seeder mounted on a combine has been known to reduce labor and cost of barley cultivation. However, development of the seeder has been unsuccessful because the combine, a dedicated rice and barley harvester has not enough space and proper power take-off for barley seeder. To develop a barley seeder, small powered motor speed controller was required. A proximity sensor for detecting working speed of the combine and a programmable one board microprocessor was used to develope a control system. Motor parameters and motor constant, relationship between seeding rate, motor speed, groove volumes of a tested roller, torque were measured. The proximity sensor sent a frequency signal to the microprocessor. In laboratory experiments, the excitation voltage of the motor was shown not to be proportional to the size of pulse width (duty ratio). A table transforming frequency signal, that represented for working speed to proper pulse width was developed from seeding rate experiments. However, seeding rate at low frequency signal was not proportional to the working speed. Seeding rate control proportional to the frequency signal was achieved by shifting of the frequency signal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.37-38
• /
• 2007

It needs several large reservoirs and long time to remove suspended solid like steel fines and iron oxide in hot rolling coolant. If removing rate of suspended solid in rolling coolant is improved by using high gradient magnetic separation (HGMS) system, the productivity of working process can be increased and the area of reservoir can be reduced. Pre-treatment process that react magnetic floc with inorganic and organic flocculant in coolant was studied. Horizontal type superconducting HGMS system was manufactured successfully, which was constituted with automatic filter transportation apparatus, 6 T He-free superconducting magnet system and water circulation system. The solid suspension removal ratio in hot rolling coolant was increased by flocculation with inorganic and organic flocculant.

• Tribology and Lubricants
• /
• 제20권3호
• /
• pp.145-151
• /
• 2004

A modified surface layer by ion implantation is very thin (under 1 $\mu\textrm{m}$) but has superior mechanical characteristics. therefore ion implantation has been used successfully as a surface treatment technology to improve the wear, fatigue, and corrosion resistances of materials. MEVVA which is a kind of ion beam apparatus has merits of low cost and is usable to various metals, but occurs a droplet ranging from micron to tens of micron on the implanted surface at ion implantations. wear is a dynamic phenomenon on interacting surfaces with rotative motion. Since wear changes in condition of the surface, we should control to surface. In order to improve a wear resistance of Ti ion implanted 1C-3Cr steel(material for roller in the cold working process), it is essential to investigate the effect of the droplets on the wear characteristics. In this study, we investigate the effect of the droplets on the wear characteristics of 1C-3Cr steel using SEM Tribosystem as in-situ system. Results show that the droplet occurred at ion implantation becomes the cause of severe wear. Therefore, the ion-implanted surface should be removed the droplet to improve wear resistance.

• Advances in concrete construction
• /
• 제8권2호
• /
• pp.127-137
• /
• 2019

Roller Compacted Concrete (RCC) is a zero slump concrete consisting of a mixture of cementitious materials, sand, dense graded aggregates and water. In this study, an attempt has been made to investigate the effect of aggregate type on strength and abrasion resistance of RCC made by using granulated blast furnace slag (GGBS) as partial replacement of cement. Mix proportions of RCC were finalized based upon the optimum water content achieved in compaction test. Two different series of RCC mixes were prepared with two different aggregates: crushed gravel and limestone aggregates. In both series, cement was partially replaced with GGBS at a replacement level of 20%, 40% and 60%. Strength Properties and abrasion resistance of the resultant mixes was investigated. Abrasion resistance becomes an essential parameter for understanding the acceptability of RCC for rigid pavements. Experimental results show that limestone aggregates, with optimum percentage of GGBS, perform better in compressive strength and abrasion resistance as compared to the use of crushed gravel aggregates. Observed results are further supported by stoichiometric analysis of the mixes by using basic stoichiometric equations for hydration of major cement compounds.

• 대한의용생체공학회:의공학회지
• /
• 제45권1호
• /
• pp.37-42
• /
• 2024

In this study, we explored the possibility of using sympathetic skin response (SSR), a type of electrodermal activity (EDA), as a method of evaluating a subject's responsiveness to physical or psychological stimulation. To provide physical and psychological stimulation, walking on an acupressure plate and a roller coaster virtual reality experience wearing an HMD (head mounted display) were used. Walking on an acupressure plate significantly increased the SSR signal compared to walking on the bare floor. Additionally, it was observed that the SSR response significantly increased while the subject was wearing an HMD and experiencing a roller coaster compared to the resting state of sitting on a chair. The SSR response to physical or psychological stimulation increased in all subjects, but the degree of reactivity differed. These experimental results suggested that sympathetic skin response (SSR) is a useful tool as a biosignal that can be used to evaluate the human body's responsiveness to physical stimulation or psychological stimulation using virtual reality.

• 대한토목학회논문집
• /
• 제42권4호
• /
• pp.537-548
• /
• 2022

중하중의 교통하중은 포장체에 과도한 응력과 변형을 발생시키므로 이에 대응할 수 있는 포장 단면 설계가 중요하다. 항만 배후도로와 산업도로는 일반도로에 비해 중하중 교통의 비율이 높아 포장의 조기 파손으로 인한 문제가 다수 발생되고 있다. 국외의 경우 중차량의 통행이 많은 도로의 포장설계는 복합포장을 많이 적용하고 있다. 복합포장은 기존 포장의 설계수명을 2배 이상 증대시켜 보수비용 및 사용자 비용을 절감할 수 있는 경제적 포장 형식으로 인식되고 있다. 본 연구에서는 중하중 교통의 비율이 높은 산업도로와 항만 배후도로의 포장 장기 공용성을 확보할 수 있도록 롤러전압콘크리트 기층을 활용한 복합포장의 두께 설계 방안을 제안하고자 한다. 3차원 유한요소해석을 이용하여 포장의 재료물성 변화에 따른 역학적 거동과 장기 공용성을 검토하였으며, 계절별 컨테이너 트레일러에 의해 발생되는 롤러전압콘크리트 기층의 누적피로손상도을 고려하여 사용자가 쉽게 사용할 수 있는 카탈로그 설계를 제안하였다.