• 한국항공우주학회지
• /
• 제38권9호
• /
• pp.849-855
• /
• 2010

본 논문은 자유회전 테일핀을 갖는 커나드 유도 미사일에 대해 Falanga의 회전율 계산식을 자유회전 테일핀에 적용하여 자유회전 테일핀의 roll lock-in 현상을 예측하였다. 예측 결과의 정확도를 확인하기 위하여 Blair의 풍동시험 결과와 비교하여 검증하였다. 자유회전 테일핀의 회전율 계산 시에 필요한 테일핀의 롤링 모멘트는 풍동시험 결과를 이용하였고 롤 댐핑 모멘트는 missile DATCOM을 이용하여 계산하였다. 이를 자유회전 테일핀의 회전율 계산식에 대입하여 자유회전 테일핀의 회전율 및 Roll lock-in 현상을 예측하였으며 풍동시험 결과와 비교하였다. 검증결과, 자유회전 테일핀의 회전율 및 Roll lock-in 현상 예측 결과가 풍동시험 결과와 잘 일치하는 것을 확인 할 수 있었다.

• 한국전산유체공학회지
• /
• 제14권4호
• /
• pp.48-55
• /
• 2009

In this study, roll lock-in phenomena of freely spinning tailfins were investigated by a CFD code. To analyze a motion of freely spinning tailfins, this research use a Chimera method, an Euler code and a 6 degrees of freedom analysis. The numerical results of aerodynamic characteristics and roll rates of a canard-controlled missile with freely spinning tailfins show a good agreement with wind tunnel test results. Using the roll rates calculation result of freely spinning tailfins, roll lock-in phenomena is confirmed. Roll lock-in phenomena and Roll lock-in states can be predicted through effects of the induced vortex of the canards control and the analysis of the rolling moments of tailfins due to the bank angle.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.126-129
• /
• 2008

In this study the aerodynamic characteristics of a canard-controlled missile with freely spinning tailfins were investigated by using a CFD code. The aerodynamic coefficients and roll-rate of freely spinning tailfins were calculated by an analysis of 6-DOF and the Euler code. Results were in good agreement with experimental data, and the roll-rates of freely spinning tailfins were also in good agreement with the experimental data for the roll and yaw canard control inputs. This indicates that the CFD Euler code can be applied to predict the canard-controlled missile with freely spinning tailfins.

• 지구물리와물리탐사
• /
• 제23권2호
• /
• pp.89-96
• /
• 2020

물리탐사에서 유용한 3차원 좌표계 회전 문제를 일관성있게 정리하였다. 일관성을 유지하기 위한 기준으로 오른손 좌표계의 정의에서 출발하였다. 또한 능동 회전과 수동 회전의 개념을 설명하고, 서로 다른 좌표계 간의 회전 및 역회전은 전치행렬의 관계로서 기준 좌표계와 센서 좌표계 사이의 회전 관계를 명확히 하였다. 3차원 회전에서는 항법 등에서 사용하는 요-피치-롤(yaw-pitch-roll) 회전과 물리검층에서 쉽게 이해할 수 있는 방위각-편차-센서회전 회전 방식의 회전 행렬을 설명하였다. 또한, 이 둘과 Rodrigues 회전 공식에 의한 회전 행렬 각각의 각도를 구하는 수식을 정리하였다. 요-피치-롤 방식의 회전에서 나타나는 "Gimbal Lock" 현상을 그림과 수식으로 설명하고, 이의 해결방안으로 동원되는 사원수(quaternion)의 원리와 적용 방법에 대해서도 서술하였다.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.84-92
• /
• 2013

This study improves the formability in fine-blanking the lock plate of car seat belts using a low carbon steel(SM35C) plate. The optimal die design for the forming process is proposed using rules for process planning based on theories and field experiences. The optimal design is analyzed using commercial finite element software in order to solve the fracture problems in the extrusion process. Through the improved layout based on the FEM results, the fracture of the extruded part and the roll over problem are solved. Furthermore, it is demonstrated through the shown from experiments that the extruded part does not break in the modified die.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.206-218
• /
• 2014

The wave attenuation by floating breakwaters in high amplitude waves, which can lead to wave overtopping and breaking, is examined by numerical simulations. The governing equations, the Navier-Stokes equations and the continuity equation, are calculated in a fixed Cartesian grid system. The body boundaries are defined by the line segment connecting the points where the grid line and body surface meet. No-slip and divergence free conditions are satisfied at the body boundary cell. The nonlinear waves near the moving body is defined using the modified marker-density method. To verify the present numerical method, vortex induced vibration on an elastically mounted cylinder and free roll decay are numerically simulated and the results are compared with those reported in the literature. Using the present numerical method, the wave attenuations by three kinds of floating breakwaters are simulated numerically in a regular wave to compare the performance.

• Design & Manufacturing
• /
• 제9권1호
• /
• pp.5-8
• /
• 2015

The company Daewoo Precision Industries imported fine blanking press of 40 tons from Switzerland with fine blanking tool in order to produce the fuse part of bomb in 1978 at first in Korea. About 1985 the first fine blanking tool for producing the door lock parts was manufactured in the company Gold Star (now LG). And then this technology was grown up with the growth of automobile industries in Korea. Now 31 companies are closely related to the fine blanking technology and there are total 146 fine blanking presses in Korea. The developments of fine blanking technology in industries have been oriented to the production of precise fine blanking parts, the reduction of die roll height on fine blanking parts, the production of complex fine blanking parts with progressive fine blanking tool including forming and forging technology, the production of high-strength steel fine blanking parts and so on. Some R&D activities in KITECH were introduced.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.751-756
• /
• 2008

This paper presents the fluid characteristics of the spool actuator used for construction vehicles. A spool actuator is used for directional control of pressurized fluid and has a roll to lock the fluid flow. It is important to design the spool actuator optimally because this actuator is actuated in the sleeve by sliding motion and has some critical design parameters such as stick-slip, leakage and shock pressure. The parameters like stick-slip and leakage can be solved by precision manufacturing but the shock pressure which is taken place when the fluid direction is changed needs the parameter analysis procedure throughly. In this study, mathematical modeling and 2 & 3 phase flow dynamics analysis of the spool actuator were achieved. Using suggested model, all possible operating conditions were analyzed.

• 한국해양환경ㆍ에너지학회지
• /
• 제3권2호
• /
• pp.18-24
• /
• 2000

성질이 다른 두가지 유체가 복잡한 상호작용을 하는 경우의 유동을 살펴 보기 위하여 2차원 비점성 수치해법을 개발하고, 이를 감압된 수중 파이프에서의 기름 유출 문제에 적용하였다. 두 유체의 경계면은 보오텍스 쉬트로 모델링하고 보오텍스격자법 (vortex-in-cell method)을 적용하여 유동을 해석하며, 장시간의 유동 모사를 위하여 경계면의 분할과 접합이 가능하도록 하였다. Boussinesq 가정에서 외부유체의 관내로의 유입 속도가 기존의 수학모델과 거의 동일함을 확인하였고, 경계면에서의 복잡한 상호 유입과 보오텍스 유동에도 불구하고 Lock Exchange가 발생함을 보였다. 개발된 수치해법은 다양한 해양환경의 2상유체 문제에 효과적으로 이용될 수 있다고 사료된다.

• Asia pacific journal of information systems
• /
• 제20권1호
• /
• pp.127-140
• /
• 2010

The benefit that a consumer derives from the use of a good often depends on the number of other consumers purchasing the same goods or other compatible items. This property, which is known as network externality, is significant in many IT related industries. Over the past few decades, network externalities have been recognized in the context of physical networks such as the telephone and railroad industries. Today, as many products are provided as a form of system that consists of compatible components, the appreciation of network externality is becoming increasingly important. Network externalities have been extensively studied among economists who have been seeking to explain new phenomena resulting from rapid advancements in ICT (Information and Communication Technology). As a result of these efforts, a new body of theories for 'New Economy' has been proposed. The theoretical bottom-line argument of such theories is that technologies subject to network effects exhibit multiple equilibriums and will finally lock into a monopoly with one standard cornering the entire market. They emphasize that such "tippiness" is a typical characteristic in such networked markets, describing that multiple incompatible technologies rarely coexist and that the switch to a single, leading standard occurs suddenly. Moreover, it is argued that this standardization process is path dependent, and the ultimate outcome is unpredictable. With incomplete information about other actors' preferences, there can be excess inertia, as consumers only moderately favor the change, and hence are themselves insufficiently motivated to start the bandwagon rolling, but would get on it once it did start to roll. This startup problem can prevent the adoption of any standard at all, even if it is preferred by everyone. Conversely, excess momentum is another possible outcome, for example, if a sponsoring firm uses low prices during early periods of diffusion. The aim of this paper is to analyze the dynamics of the adoption process in markets exhibiting network effects by focusing on two factors; switching and agent heterogeneity. Switching is an important factor that should be considered in analyzing the adoption process. An agent's switching invokes switching by other adopters, which brings about a positive feedback process that can significantly complicate the adoption process. Agent heterogeneity also plays a important role in shaping the early development of the adoption process, which has a significant impact on the later development of the process. The effects of these two factors are analyzed by developing an agent-based simulation model. ABM is a computer-based simulation methodology that can offer many advantages over traditional analytical approaches. The model is designed such that agents have diverse preferences regarding technology and are allowed to switch their previous choice. The simulation results showed that the adoption processes in a market exhibiting networks effects are significantly affected by the distribution of agents and the occurrence of switching. In particular, it is found that both weak heterogeneity and strong network effects cause agents to start to switch early and this plays a role of expediting the emergence of 'lock-in.' When network effects are strong, agents are easily affected by changes in early market shares. This causes agents to switch earlier and in turn speeds up the market's tipping. The same effect is found in the case of highly homogeneous agents. When agents are highly homogeneous, the market starts to tip toward one technology rapidly, and its choice is not always consistent with the populations' initial inclination. Increased volatility and faster lock-in increase the possibility that the market will reach an unexpected outcome. The primary contribution of this study is the elucidation of the role of parameters characterizing the market in the development of the lock-in process, and identification of conditions where such unexpected outcomes happen.