• 생물환경조절학회지
• /
• 제4권2호
• /
• pp.232-239
• /
• 1995

This study was carried out to get required torque data needed to design and develop a roll-up ventilation system in a pipe-constructed plastic film green-house. The results obtained from this study are as follows : 1. The required torques of a roll-up ventilation system in greenhouse are the functions of its length. The torques should multiplied by the conversion coefficients (2.0 in ceiling vent, 1.8 in side vent) in case of application. 2. In constructing pipe-constructed plastic film greenhouse, a shaft pipe is the largest essential element in roll - up shaft weight constitution which have an effect on the required torques. Therefore, the pipe should be light using nonferrous materials like aluminum alloy. 3. A planetary reduction ventilator of differential ring gear type is suitable for a roll-up ventilation system, because it can make high efficient reduction just using the first step shift.

• 한국정밀공학회지
• /
• 제32권8호
• /
• pp.673-680
• /
• 2015

A roll-to-roll (R2R) continuous manufacturing system for a carbon-nanotube (CNT)-/silver-nanowire (AgNW)- based large-area transparent conductive film was introduced in this study. The systemic guidelines of the R2R slot-die coating process including roll eccentricity, wrap angle, pump accuracy, and blower influence were discussed. To simulate the coating phenomenon, we investigated the governing parameters of the coating process by incorporating the estimated relative thickness that was defined by combining the viscocapillary model and volume model. By using experimental and mathematical approaches, an excellent transparent conductive layer with a $40{\Omega}/{\Box}$ sheet resistance and 88 % transmittance was obtained; moreover, a dimensionless number identifies the correlation between the transparent conductive film and the anti-reflection film.

• 한국운동역학회지
• /
• 제22권2호
• /
• pp.209-217
• /
• 2012

The purpose of this study was to develop a turn-type treatment program which applies the principle of spotting and a roll-type treatment program that induces off-vertical axis. 29 collegiate students volunteered for this study. 12-week treatment programs were applied to both 15 students for turn-type treatment group and 14 students for roll-type treatment group. As an analytic tool, eye camera was employed to verify the treatment programs for a stimulus upon a turn, recovery after a stimulus upon a turn, and nystagmus that affects a vestibular system. Two-way ANOVA with repeated measures was applied to see the significant differences between the treatment groups, and between the test periods. For Post-Hoc Test, paired t-test was used to within the group and independent t-test was used to between the groups. The results indicated that roll-type treatment training has maximized a stimulus on nystagmyus during the stimulus by a roll. Turn-type treatment training has maximized a stimulus on nystagmyus right after a stimulus by a roll and significantly decreased the intensity of nystagmyus during the recovery. Both turn and roll type treatments have reduced the recovery time which from nystagmyus to a normal status. Roll-type treatment has showed a much shorter recovery time for nystagmyus than the roll-type treatment has. Based on the results of treatment programs developed in this study, we expect the treatment programs can be applied to treat dizziness and to improve the function of vestibular system as a rehabilitation tool.

• Journal of Biosystems Engineering
• /
• 제35권5호
• /
• pp.302-309
• /
• 2010

Aerial application using an unmanned agricultural helicopter would allow precise and timely spraying. The attitude of a helicopter depends on a number of dynamic variables for roll-balanced flight. Laterally tilting behavior of a helicopter is a physically intrinsic phenomenon while hovering and forwarding. In order to balance the fuselage, the rotor should be counter-tilted, resulting in the biased down-wash. The biased spraying toward right side causes uneven spray pattern. In this study, a raised tail rotor system for the roll-balanced helicopter was studied. Thrust of the tail rotor system was measured and theoretically estimated for the fundamental database of the roll-balanced helicopter design. The estimated tail thrust and roll-moment would be used to design the raising height of tail rotor and roll balancing dynamics. The unmanned agricultural helicopter required the tail rotor thrust of about 39.2 N (4.0 kgf) during hovering with a payload of 235.4 N (24 kgf). A raised tail rotor system would compensate for the physical tilt phenomena. A further attitude control system of helicopter would assist roll-balanced aerial spray application.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.327-333
• /
• 2003

Most of shape defects in steel strip are originated from the structure of rolling mill itself. For instance, strip crown occurs when the work roll is deformed by the bending moment induced on roll chocks. To get rids of the shape defects, it is necessary to increase the stiffness of rolling mill. The structure change of back-up roll is one of alternative ways to increase the mill stiffness without facility revamping from 4 high mill to 6 high mill. In this research work, the new back-up roll was developed and can be used in any type of 4 high mill to reduce the strip shape defects. The developed back-up roll consists of sleeve, arbor and phase angle adjusting system for arbor. The circumference of arbor is specially machined to adapt the strip width change during rolling. The experimental cold rolling test was done to prove the effectiveness of newly developed back-up roll. The experimental rolling results show that the new back-up roll has more powerful performance in reducing the shape defects than conventional back-up roll. It was also found that the new back-up roll has higher stability for shape control. In addition to, the only sleeve surface needs to be reground and changed in most cases, so that the maintenance cost can be greatly reduced.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.30-30
• /
• 2000

당사는 각종 진공 장비를 개발/제작한 경험을 바탕으로 25년 동안 진공 산업 발전에 기여하여 왔으며 자체 기술로 HIGH VACUUM 응용시스템 설계 및 제작하고 있다. 이와 함께 3D CAD를 이용한 consulting 및 Modeling 분석을 수행하여, 자체 기술로 설계 및 제작 판매하고 있다. Vacuum System은 In-line System (ITO, SiO2, Cr Tio2, Ag, Al 등), Roll to Roll(Web) Sputtering system (ITO, SiO2, Ar, Metal 등), 유기 EL 박막 진공 증착 장치, PECVD System, Evaporator 시스템 등을 제작 공급하고 있다. 현재 Roll to Roll(Web) Sputtering System은 Dual Cathode를 사용하는 방식으로 개발중에 있으며, 평판 디스플레이용 대면적 Glass를 위한 In-line Sputtering System을 같이 개발하고 있다.

• 한국항공우주학회지
• /
• 제43권8호
• /
• pp.706-711
• /
• 2015

전투기는 공대지 및 공대공 전투임무를 위한 다양한 외부 무장형상으로 운용된다. 무장발사로 인한 비대칭 무장형상에서는 조종사가 롤트림 입력을 인가하여 수평비행을 유지한다. 그러나 외란이 있는 실제 비행 중에는 수평비행을 위해 정확한 롤트림 입력을 인가할 수 없다. 이러한 상태에서 자동비행시스템 인가 시에는 부정확한 롤트림 명령의 영향으로 롤자세각 오차가 발생하여 롤축 자동비행시스템의 성능을 저하시킨다. 본 논문에서는 이러한 문제를 해결하기 위해 롤축 자동비행시스템 명령 단에 적분기를 설계하여 롤자세각의 정상상태 오차를 제거하였다. 또한, 롤자세각 오차량을 제한하는 제한기를 비행영역에 따라 스케줄링하여 초기 과도응답을 개선하였다. 시뮬레이션 평가한 결과, 설계된 비행제어법칙은 부정확한 롤트림 상태에서 자동비행시스템을 운용 시에 롤자세각 추종 성능을 개선함을 확인할 수 있었다.

• 한국소음진동공학회논문집
• /
• 제23권12호
• /
• pp.1103-1110
• /
• 2013

Based on the string, Euler beam, and Timoshenko beam theories, the transfer functions of axially translating web system to predict the lateral tracking are introduced in this paper. In addition, total transfer function of a multi-span web handling system is developed by the combination of the transfer functions of each single span. Experiments and computations are carried out and the results obtained for the Timoshenko beam model are compared with those of other models. The comparison indicates that the predictions from the Timoshenko and Euler beam models are quite different from that of the classical string model in both the gain and phase response. The results are expected to help in the development of high fidelity models of web tracking systems within a general computational framework.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2029-2037
• /
• 1997

In a web winding process, the contact roll plays many important roles including air-entrainment control and WIT(Wound In Tension) regulation. The behavior of contact roll significantly affects the winding tension characteristics specifically at the time of contact when the speeds of contact roll and the winding roll are not synchronized. A mathematical model for the web, the winding roll, and the contact roll is derived. By using the model derived, a nonlinear PID(NPID) controller is designed to control the winding tension at the time of contact and separation between the contact roll and the winding roll. Computer simulation study showed that the performance of the winding system with the NPID controller significantly improved compared with that of a system with PID controller.

• Tribology and Lubricants
• /
• 제30권3호
• /
• pp.139-145
• /
• 2014

Nowadays, most micro-patterns are manufactured during flow line production. However, a conventional rotary chemical mechanical polishing (CMP) system has a limited throughput for the fabrication of large and flexible electronics. To overcome this problem, we propose a novel linear roll-CMP system for the planarization of large-area electronics. In this paper, we present a statistical analysis on the linear roll-CMP process of copper-clad laminate (CCL) to determine the impacts of process parameters on the material removal rate (MRR) and its non-uniformity (NU). In the linear roll-CMP process, process parameters such as the slurry flow rate, roll speed, table feed rate, and down force affect the MRR and NU. To determine the polishing characteristics of roll-CMP, we use Taguchi's orthogonal array L16 (44) for the experimental design and F-values obtained by the analysis of variance (ANOVA). We investigate the signal-to-noise (S/N) ratio to identify the prominent control parameters. The "higher is better" for the MRR and "lower is better" for the NU were selected for obtaining optimum CMP performance characteristics. The experimental and statistical results indicate that the down force and roll speed mainly affect the MRR and the down force and table feed rate determine the NU in the linear roll-CMP process. However, over 186.3 N of down force deteriorates the NU because of the bending of substrate. Roll speed has little relationship to the NU and the table feed rate does not impact on the MRR. This study provides information on the design parameter of roll-CMP machine and process optimization.