• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.121-122
• /
• 2008

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.91-94
• /
• 2005

With increasing demands for large-scale micro-optical components in the field of digital display, the establishment of large-scale fabrication technology fur polymeric patterns has become a priority. The starting point of any polymer replication process is the mold, and the mold often has flat surface. However, It is very hard to replicate large-scale micro patterns using the flat mold, because the cost of large-scale flat mold was very high, and some uniformity and releasing problems were often occurred in large scale flat molding process. In this study, a UV roll imprinting system to overcome the financial and fabrication issues of large-scale pattern replication process was designed and constructed. As a practical example of the system, a lenticular lens with radius of curvature of $223{\mu}m$ and pitch of $280{\mu}m$, which was used to provide wide viewing angle in projection TV, was designed and fabricated. The roll stamper was fabricated using direct machining process of aluminum roll base. Finally, the shape accuracy and uniformity of roll imprinted lenticular lens sheet were measured and analyzed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.151-152
• /
• 2010

• 한국생산제조학회지
• /
• 제25권3호
• /
• pp.217-223
• /
• 2016

In this research, a continuous roll-to-roll screen printing system was developed using a flat screen. It has a newly devised sliding mechanism of screen printing module, which can be controlled accurately in sync with a moving web, driven by a roll-to-roll tension control and web-guiding system. In addition, the real-time precision alignment module that consists of a vision camera and an $X-Y-{\theta}$ alignment stage was implemented. With this developed system, the feasibility of continuous printing with minimum pattern width below $60{\mu}m$ was verified, and an overlay of ${\pm}60{\mu}m$ between the laser-patterned reference mark and the printed mark on a 300-mm-wide film was achieved.

• 소성∙가공
• /
• 제14권1호
• /
• pp.43-48
• /
• 2005

The production of metal strip with uniform thickness and flatness are two important problems associated thin strip rolling. The thickness and flatness of strip are affected by the flattening of contact surface between strip and roll, the elastic recovery and the bending of roll. Especially, the flatness of the strip is greatly affected by bending deflection of roll. The roll must be designed considered the elastic deformation of roll. This study describes the measurement of thickness and flatness of strip and shows the crown roll for producing flat strip. But it is difficult to produce the crown roller. The cross rolling that is a simple method which can produce the flat strip is introduced and it is found the optimal cross angle for improvement of flatness of plate. These problems are solved by the MARC code on the basis of elastic-plastic material and the updated Lagrangian formulation.

• 대한기계학회논문집A
• /
• 제31권8호
• /
• pp.847-854
• /
• 2007

The battery electrode of a mobile phone is made of layered polymer coated on aluminum foils and the hot rolling process is applied to increase the density per volume of an electrode for a high capacity battery. The flatness of batteries surfaces should be less than $2{\mu}m$. To satisfy the required flatness, the deformation of roll surface due to bending and heating of the roll should be minimized. Complicated hot oil paths of $100^{\circ}C$ inside the roll are required for heating the polymer layers. FEA was used to calculate thermal deformations and temperatures distributions of the roller. Based on FEA, a modified surface curvature called a crown roll was suggested and this gave the area of 30% improved flatness compared with a flat roll. The flat roll satisfied the flatness of $2{\mu}m$ in the length of 340 mm and the crown roll resulted in the longer length of 460 mm. Experiments to measure the temperature distribution and thermal strain were performed and compared with FEA. There were only 6% difference between two results.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.307-314
• /
• 2009

Large area micro pattern replication has promising application potential in many areas. Rolling imprint process has been demonstrated as one of the most competitive processes for such micro pattern replication, because it has advantages in low cost, high throughput and high efficiency. In this paper, we developed a prototype of roll-to-flat(R2F) thermal imprint system for large area micro pattern replication process, which is one of the key processes in the fabrication of flexible displays. Experimental tests were conducted to evaluate the feasibility of system and the parameters' effect on the process, such as flat mold temperature, loading pressure and rolling speed. 100mm $\times$ 100mm stainless steel flat mold and commercially available polycarbonate sheets were used for the tests. The experimental results showed that the developed R2F system is suitable for fabrication of various micro devices with micro pattern over large area.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.991-994
• /
• 2005

We have successfully commercialized a novel optical compensation film, OCB-WV film, for OCB-LCD-TVs which has fast response time and wide viewing angle. The OCB-WV film consists of a 45degree-aligned discotic layer and a high Rth biaxial TAC film, which is suited for a roll-to-roll polarizer manufacturing process. This OCB-WV has brought out the excellent features that OCB intrinsically has, making nextgeneration fast-response LCD-TVs possible and free from image blurring in conjunction with an impulsive driving scheme.

• 멤브레인
• /
• 제34권1호
• /
• pp.79-86
• /
• 2024

고분자 분리막의 대표적인 형태 중 하나인 평판형 분리막은 제조가 용이하여 실험실에서 분리막 소재 연구에서부터 실제 상용 분리막 생산에 이르기까지 널리 활용되는 분리막의 형태이다. 정밀여과 및 한외여과 등에 사용되는 평판형의 다공성 고분자 분리막은 주로 상분리 공정을 통해 제조할 수 있으며, 여기에는 비용매 유도 및 증기 유도 상분리 공정이 활용된다. 그러나 상분리 공정 특성상 주변 환경과 실험자에 따라 샘플 간 편차가 쉽게 발생하여 재현성의 확보가 어려운 점이 있다. 따라서 개발된 제조기술을 스케일업 및 재현성 확보를 위해 제어된 환경에서 연속식 대면적 제조가 가능한 롤투롤 제조장치가 필요하며, 본 연구에서는 실험실 스케일의 제조기술을 나이프 및 슬롯다이 롤투롤 공정으로 스케일 업 했을 때 나타나는 제조 환경 차이에 따른 분리막의 특성 변화를 비교하였다. 최종적으로 연속식 제조공정 인자에 대한 최적화를 통해 대면적 제조 시 분리막의 균일성을 확보하였다.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.154-161
• /
• 1997

Because of the complexity of the flower design of roll forming process, in which the flat strip is progressively deformed by successive sets of profiled rolls, a computer-aided design system for the flower design has been developed. It is programmed in AutoLISP and DCL(Dialogue Control Language) of AutoCAD. It has been found that the system is helpful in saving the time and effort required to design the flower of the product to be roll-formed.