• The Korean Journal of Ecology
• /
• v.25 no.2
• /
• pp.69-74
• /
• 2002

Most of army depots contaminated with co-contaminants. 2,4,6-trinitrotoluene(TNT) and heavy metais. In phytormediation for the TNT, heavy metals may inhibit mineralization, transformation and sequestration of TNT by the plant. W studied effect of cadmium on TNT degradation and transformation by Abutilion avicenneae in hydroponic cultures. When cultured in 20 ㎎TNT/L and 1.3 ㎎Cd/L. the plant displayed phytotoxicities; reduction of leaf fresh, leaf roll, chlorosis, leaf loss and fresh weight loss. Phytotoxicity was severer in the combined contaminnts than in single contaminant. Because A. avicennae uptake just a little cadmium, 1.3 ㎎Cd/L induded in the TNT medium did not influece significanfly TNT transformation, translocation and distrivution by A. Therefore, the soil solution containing cadmium would not affect TNT degradation by Abutilion avicennae in Amy depots polluted with TNT.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.2
• /
• pp.244-251
• /
• 2011

Pipe rolling process using the planetary rolling mill for AISI 304 stainless steel has been studied by using finite element method. Mannesmann method using three-roll is applied to this rolling process. Commonly, rolling process has started from the cold working and finished to the hot working. This rolling process has more advantage that make reduction of process and cost than existing extrusion process. This process includes various and complex process parameters. Each of the process parameters affects forming result. Therefore, all of the process parameters should be considered in FEA. In this study, possibility and productivity of forming pipe for AISI 304 stainless steel had been investigated. Also, preheating process and variations of rotation velocity and product thickness were considered in FEA. Rolling process for AISI 304 stainless steel pipe was successfully simulated and it should be useful to determine optimal rolling condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.59-62
• /
• 1996

Plasma displays (PDP) as a large area wall-hanging display device are rabidly developed with flat CRT, TPT LCD and etc. Especially, AC Plasma Display Panels(AC PDPs) have the inherent memory function which is effective for large area displays. The memory function in AC PDPs is caused by the accumulation of the electrical charge on the protecting layer formed on the dielectric layer. This MgO protective layer prevents the dielectric layer from sputtering by ion in discharge plasma and also has the additional important roll in lowering the firing voltage due to the large secondary electron emission coefficient). Until now, the MgO Protective layer is mainly formed by E-Beam evaporation. With increasing the panel size, this process is difficult to attain cost reduction, and are not suitable for large quantity of production. To the contrary, the methode of shuttering are easy to apply on mass production and to enlarge the size of the panel and shows the superior adhesion and uniformity of thin film. In this study, we have prepared MgO protective layer on AC PDP Cell by reactive magnetron sputtering and studied the effect of MgO layer on the surface discharge characteristics of ac PDP.

• Korean Journal of Community Nutrition
• /
• v.8 no.4
• /
• pp.547-555
• /
• 2003

Carbohydrate intake is decreasing along with the reduction of rice consumption among the Korean population. There is an increasing trend of diet-related degenerative diseases with the increased consumption of animal food, and therefore, the increase of animal food intake can be considered as one of causes of the diet-related disease. The objective of this study is to investigate the differences in rice preference and breakfast patterns between the subjects have breakfast regularly and those skipping it. One thousand participants were selected by the stratified sample method from the primary, middle, high school and college, and company workers from 24 cities of Kyeonggi-do. The interviewing procedure was carried by regional home extension workers. Approximately half participants (49.9％) were under the age of 20. Although 86％ of the subjects considered eating breakfast good for health. only 46.4％ of the subjects had breakfast regularly (HB). The rest of them skipped breakfast (SB) more than twice a week. The proportion of subjects hiving no breakfast were 9.3％ of male and 12.2％ of female subjects. The main reason for not having breakfast was due to the limited time. For their breakfast 85％ of the HB ate boiled rice with the side dishes. More subjects in SB (27.8％) preferred the boiled rice with various grains for breakfast than those of HB (21.8％). The subjects in HB (65.5％) preferred boiled plein rice more than those of SB (56.9％). In cases they must have breakfast, 47.7％ of the subjects wanted rice with the side dishes,24.2％ preferred rice ball or rice roll with laver, 10.5％ preferred a rice beverage. More subjects in HB (59.8％) wanted rice with side dishes than those in SB (36.9％). It was found out that selecting rice at the breakfast is still the main choice. Diverse ready-to-eat rice menus have to be developed to increase the rice consumption, specially to increase breakfast eating frequencies of SB through saving time and effort. (Korean J Community Nutrition 8(4) : 547∼555, 2003)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.376-379
• /
• 2006

Reaction Wheel Assembly (RWA) is one of the major disturbance sources that have influence upon the Line of Sight (LOS) of payload. A micro-vibration induced by RWA is propagated through the satellite structure and decrease the LOS stability performance of payload. This effect shall be analyzed through the jitter analysis. If a requirement or specification of payload jitter level is found to be not satisfied according to the jitter analysis campaign, some modification or redesign should be done on the satellite structure or a couple of isolator should be attached on the RWA interface in order to reduce the transmitted vibration level of RWA. The purpose of ???RWA isolator test? is to roughly evaluate the performance of vibration suppression level with a passive RWA isolator made of rubber. For this test, actual RWA is used as a vibration source and a couple of cube-shaped rubber mount designed for satellite is used as a passive isolator. There may be several considerations in order to accommodate RWA isolator to spacecraft such as not only vibration reduction performance but also thermal conduction problem, mechanical size, RWA alignment problem, etc. But in this report the feasibility of RWA isolator is analyzed only in a vibration suppression point of view. As a result, high frequency vibration of RWA above 50Hz is perfectly attenuated with isolators, however, first harmonic components below 50Hz became larger due to the additional low frequency resonance modes of roll, pitch, yaw rigid body motion of RWA+bracket.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.67-75
• /
• 2008

This research is to develop the steel-concrete composite lining board using section shape steel. This lining board adopts section shape steel, rectangular pipe and H-beam, instead of roll-formed steel member commonly used in other composite lining board. Consequently, it reduces fabrication effort. Efficient section which can reduce the weight of steel of the lining board is made by placing the neutral axis of the section near the lower surface of concrete. Behavior of composite section is improved by adding bolts as shear connector. Static and fatigue tests were conducted to verify the performance of the composite lining board developed. The test results indicate that serviceability as well as safety of the lining board developed is secured with good margin and reduction of steel weight can be made about 27% compared with other composite lining boards.

• Journal of electromagnetic engineering and science
• /
• v.9 no.1
• /
• pp.17-24
• /
• 2009

In recent years, OFDMA(orthogonal frequency division multiple access) and SC-FDMA(Single Carrier Frequency Division Multiple Access) have been widely studied for the uplink of a mobile communication system. In this paper, PAPR(Peak-to-Average Power Ratio) and BER(Bit Error Rate) performance of the OFDMA and SC-FDMA systems are studied in relation to the uplink of a mobile communication system. Three kinds of sub-carrier allocation methods in the OFDMA system and 2 kinds of sub-carrier allocation methods in SC-FDMA system are suggested to compare and improve system performance. Simulation results show that in the OFDMA system, the first sub-band allocation method has better PAPR reduction performance than the other methods. In the SC-FDMA system, the distributed allocation method offers similar P APR, compared with the sub-band allocation method. P APR can be further reduced by adding a spectrum shaping filter with an appropriate roll of factor. Furthermore, it is found that on average, SC-FDMA can reduce the PAPR by more than 5 dB compared to OFDMA, when the total sub-carrier number is 1,024 and the sub-carrier number allocated to each user changes trom 8 to 512. Because of the frequency diversity and low PAPR characteristics, SC-FDMA system of the distributed sub-carrier allocation method can achieve better BER performance than the OFDMA system.

• Korean Journal of Materials Research
• /
• v.28 no.5
• /
• pp.295-300
• /
• 2018

Effects of annealing temperature on the microstructure and mechanical properties through thickness of a Cu-3.0Ni-0.7Si alloy processed by differential speed rolling are investigated in detail. The copper alloy with a thickness of 3 mm is rolled to a 50 % reduction at ambient temperature without lubricant and subsequently annealed for 0.5 h at $200-900^{\circ}C$. The microstructure of the copper alloy after annealing is different in the thickness direction depending on the amount of the shear and compressive strain introduced by the rolling; the recrystallization occurs first in the upper roll side and center regions which are largely shear-deformed. The complete recrystallization occurs at an annealing temperature of $800^{\circ}C$. The grain size after the complete recrystallization is finer than that of the conventional rolling. The hardness distribution of the specimens annealed at $500-700^{\circ}C$ is not uniform in the thickness direction due to partial recrystallization. This ununiformity of hardness corresponds well to the amount of shear strain in the thickness direction. The average hardness and ultimate tensile strength has the maximum values of 250 Hv and 450 Mpa, respectively, in the specimen annealed at $400^{\circ}C$. It is considered that the complex mode of strain introduced by rolling directly affects the microstructure and the mechanical properties of the annealed specimens.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.2 s.29
• /
• pp.133-140
• /
• 2007

Since early times, captain have been sailing to select the optimum route considering the weather, ship loading status condition and operational scheduling empirically. However, it is rare to find digitalized onboard route support system whereas weather facsimile or wave and swell chart are utilized for the officer, based on captain's experience. In this paper, optimal route safety assessment system which is composed of voyage efficiency and safety component is introduced. Optimum route minimizea ETA(estimated time of arrival) and fuel consumption that shipping company and captain are requiring to evaluate for efficient voyage considering speed loss and power increase based on wave added resistance of ship. In the view point of safety, seakeeping prediction is performed based on 3 dimensional panel method. Finally, It is assistance measure for ship's optimum navigation route safety planning & assessment.

• The Journal of Korean Medicine
• /
• v.20 no.3 s.39
• /
• pp.66-76
• /
• 1999

The purpose of this study was to asses the etlect of Uncaria rhynchophylla (UR). one of the oriental herbs having a capability to block calcium channels, on affecting vestibular compensation (VC) in Sprague - Dawley rats. Animals were divided into a drug treatment group receiving, UR per oral for 10 days preceding unilateral labyrinthectomy (ULX) and a control group with saline ingestion, To evaluate behavioral changes. horizontal spontaneous nystagmus (SN) and roll head tilt (RHT) were recorded by a video camem with zoom lens in the course of vestibular compensation (VC). Immunohistochemical staining was performed by conventional ABC method to visualize cFos-like immunoreactive (cFLI) neurons in the medial vestibular nuclei (MVN) and cFLI cells were counted by image analyzer. Bodyweight was increased significantly, about 35g, by UR treatment for 10 clays before ULX. Compared with the control group, the drug group showed significant reduction of RHT 6 hrs after ULX as well as fast disappearance of SN at early stages of vestibular compensation. Also, recovery of the spatial and temporal cFLI expressions in the bilateral MVN was accelerated 24 hrs after ULX. These results suggest that Uncaria rhynchophyila has a beneficial effect to ameliorate vestibular compensation in unilateral labryinthectomized rats.