• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1662-1669
• /
• 2000

Various flame types are observed in a double concentric burner by varying equivalence ratio and flow rates in each tube. Observed flame types include bunsen-type flame, ring-shaped flame, outer lifted flame, inner lifted flame, and oscillatory lifted flame, The doman of existence of various flames is mapped with equivalence ratio and annular jet velocity. Each flame is investigated through direct photography and OH PLIF. As central air velocity increase, the blowout region is diminished and lifted oscillating flames are observed. Inner lifted flames are observed from bunsen flames or rich shaped flames by increasing central air velocity. For inner lifted flames, annular jet velocity, at flame liftoff decreases with increasing central air jet velocity. Axial velocity profile and temperature fie이 using LDV and CRS, respectively, for a typical inner lifted flame are also measured through which the role of tribrachial flame for stabilization in emphasized.

• English Language & Literature Teaching
• /
• v.9 no.spc
• /
• pp.61-78
• /
• 2003

The purpose of this article is to examine the role of similarity in the metaphor and simile preference and offer empirical evidence against the equivalence view of simile and metaphor. This evidence was obtained from two experiments to examine the correlation between the similarity ratings and the preference ratings. The results suggest that Korean people choose the metaphor form when the similarity of a target and a source increases, whereas they choose the simile form when the similarity of a target and a source decreases. The results from these experiments are consistent with Chiappe and Kennedy's (1999, 2001) findings. Moreover, the experiments found that Korean people were more likely to express particular comparisons as similes over metaphors than American people.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1372-1377
• /
• 2003

The stabilization of propane/air lean premixed flames by a heated cylindrical rod is investigated experimentally. The flame stability limits, heat flux, surface temperatures, equivalence ratios, and mixture velocities are measured in order to understand the role of heat flux or surface temperature on the flame stabilization of lean premixed flames. The flame stability limits are lowered by a heated cylindrical rod and extended even below the flammability limit of propane/air mixture when sufficient heat flux is provided. The flame stability limit decreases with the increase of heat flux or surface temperature and decreases with the higher mixture velocity. The diameter of cylindrical rod, however, dose not significantly affect the flame stability limit. The laminar flame speed has been measured for ultra lean propane/air premixed flames. The flame stabilization by a heated cylindrical rod provides the useful tool for the measurement of flame speed under very fuel-lean conditions.

• Journal of the Korean Society for information Management
• /
• v.35 no.3
• /
• pp.101-121
• /
• 2018

This study proposes the analysis method in sentence semantics that can be automatically identified and processed as appropriate items in the system according to the composition of the sentences contained in the data corresponding to the logical semantic structure metadata of the research papers. In order to achieve the purpose, the structure of sentences corresponding to 'Research Objectives' and 'Research Outcomes' among the semantic structure metadata was analyzed based on the number of words, the link word types, the role of many-appeared words in sentences, and the end types of a word. As a result of this study, the number of words in the sentences was 38 in 'Research Objectives' and 212 in 'Research Outcomes'. The link word types in 'Research Objectives' were occurred in the order such as Causality, Sequence, Equivalence, In-other-word/Summary relation, and the link word types in 'Research Outcomes' were appeared in the order such as Causality, Equivalence, Sequence, In-other-word/Summary relation. Analysis target words like '역할(Role)', '요인(Factor)' and '관계(Relation)' played a similar role in both purpose and result part, but the role of '연구(Study)' was little different. Finally, the verb endings in sentences were appeared many times such as '~고자', '~였다' in 'Research Objectives', and '~었다', '~있다', '~였다' in 'Research Outcomes'. This study is significant as a fundamental research that can be utilized to automatically identify and input the metadata element reflecting the common logical semantics of research papers in order to support researchers' scholarly sensemaking.

• Journal of Technology Innovation
• /
• v.27 no.3
• /
• pp.53-82
• /
• 2019

This study empirically conduct structural equivalence analysis based on social network analysis in picking up on overall structural characteristics of technological knowledge exchange in a regional cluster. Previous conceptual studies so far have argued that performance differences among structurally equivalent groups exist. However, because little research has been done to empirically investigate this conceptual hypothesis, this study is conducted as complementary to fill this void. For analysis, we utilize two-mode network data consisted of 2,550 firms by investigating 53 technological knowledge exchange-related associations within Gumi national industrial cluster. The results show that some structurally equivalent groups can be defined appropriately and its role can be conditioned by firms' salient characteristics attached to each structural equivalent groups. In addition, it is presented through the present study that performance difference in structural equivalent groups can be distinct by some selected performance indicators. Finally, this study suggests the need to advance the study of performance differences in structurally equivalent groups in the future.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.33-42
• /
• 2014

Flame behaviors and interaction between pilot and main flames in a dual swirl combustor were investigated experimentally and numerically. Under the condition of fixed swirl angle of $45^{\circ}$ for main flame, the swirl angle of pilot flame, total heat release rate and equivalence ratio of main flame were used as major parameters. As a result, detailed flame stability diagram of dual swirl combustor was identified in terms of 5 flame modes with the changes in total heat release rate and equivalence ratio of main flame. It was found that the swirl angle of pilot flame plays the most important role in the changes in flame location and overall flow structure inside the combustor, and thus leads to the significant change in the interaction between pilot and main flame.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.83-91
• /
• 2017

Climate change has been identified as one with the greatest challenges facing nations, government, business and over future decades. Activities to reduce greenhouse gas emissions by the Kyoto Protocol, the international community has been in progress. Korea also has introduced the Emission trading system to reduce greenhouse emission from the supervision of the government. Greenhouse gases emissions quantity should be internationally recognized. Mutual Recognition Arrangement should be recognized as the same greenhouse gas emission. International recognition of domestic verification body of international mutual recognition is required. Efforts are needed to secure the equivalence between the emission rights through direct cooperation with the relative nation accreditation body. Early entry into the IAF/PAC GHG MLA is essential for demonstrating equivalence between greenhouse gas emissions. Emissions trading will also require connection to the EU ETS, California, USA, and Tokyo, Japan to link Emissions trading. In the case of establishing accreditation standards and accreditation criteria, it will be necessary to distinguish between the domestic Energy Target Management System and the Emission Trading System. Independent greenhouse gases verification bodies should be established to meet the requirements of IAF and PAC. It is necessary to revise the qualification criteria for the verification of the greenhouse gas verification body according to international standards requirements. It is necessary to support the role of accreditation bodies of domestic greenhouse gas verification bodies. It is required to join international organizations of international mutual recognition of international trade and the need for pilot projects to link greenhouse gas emissions. The core link to our emission trading system is called EU-ETS, and we will need to join the IAF/PAC GHG MLA GHG. The International Mutual Recognition Agreement (IAF) is expected to allow international interoperability of GHG emissions verification between EA and the PAC. By signing a PAC GHG MLA, it will need to be prepared to prepare for the pilot project to link the emission trading system.

• Journal of the Korean Society of Combustion
• /
• v.11 no.4
• /
• pp.1-8
• /
• 2006

The model cavity scramjet engine experiments are carried out using T3 free-piston shock tunnel. Upstream hydrogen fuel is injected before the cavity with different injection pressure. OH planar laser-induced fluorescence is used to investigate the combustion zone and piezoelectric pressure transducers are used to define the pressure rise due to the combustion. Main combustion region is a mixing layer which is between air and fuel. Also high OH fluorescence signal is appeared in the shear layer above the cavity in high equivalence ratio. From the OH signal in the cavity, this fuel injection system can be a role as a flame-holder.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.191-194
• /
• 2003

A series of computational simulations have been carried out for non-reacting and reacting flows in a supersonic combustor configuration with and without a cavity. Transverse injection of hydrogen, a simplest form of fuel supply, is considered in the present study with the injection pressure of 0.5 and 1.0 ㎫. The corresponding equivalence ratios are 0.17 and 0.33. The work features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous studies. In particular, oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is related not only to the cavity, but also to the intrinsic unsteadiness in the flowfield. The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The role of the cavity, injection pressure, and amount of heat addition are examined systematically.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.197-204
• /
• 2006

The model cavity scramjet engine experiments are carried out using T3 free-piston shock tunnel. Upstream hydrogen fuel is injected before the cavity with different injection pressure. OH planar laser-induced fluorescence is used to investigate the combustion zone and piezoelectric pressure transducers are used to define the pressure rise due to the combustion. Main combustion region is a mixing layer which is between air and fuel. Also high OH fluorescence signal is appeared in the shear layer above the cavity in high equivalence ratio. From the OH signal in the cavity, this fuel injection system can be a role as a flame- holder.