• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.76-80
• /
• 1997

ZnSe single crystals were grown by seeded chemical vapor transport in $H_2$ atmosphere. The influence of the growth parameters on the crystal defect was investigated. The grown ZnSe single crystal was characterized by chemical etching, X-ray rocking curve and photoluminescenc e measurements.

• Korean Journal of Crystallography
• /
• v.8 no.1
• /
• pp.20-25
• /
• 1997

Two experimental methods have been developed for high resolution measurement of x-ray scattering. The methods used were (1) an x-ray double crystal diffraction (DCD) spectrometer set-up and (2) an x-ray triple crystal diffraction (TCD) spectrometer set-up. With the DCD arrangement of Si(511)-sample(hkl), rocking curves have been plotted for Si (333), Si(004) and GaAs(004). Also, with the TCD arrangement of Si(111)-Si(111)-Si(511)-sample(hkl) including monolithic monocro-collimator and $K_{\alpha1}$ selector, rocking curves have been plotted for Si(333), Si(004) and GaAs(004). The results of FWHM by DCD and TCD set-up have been compared each other and discussed. The reflection topographs (004) and (115) in an $In_{0.037}Ga_{0.0963}As/GaAs$ sample have been obtained by DCD set-up.

• Journal of the Korean Vacuum Society
• /
• v.4 no.1
• /
• pp.109-117
• /
• 1995

고에너지 이온주입시 격자결함의 생성 및 열처리 거동이 double crystal X-ray와 단면 TEM을 사용하여 연구되었다. 3MeV P+ 이온주입한 실리콘의 DCXRD 분석 결과조사량 증가에 따라 모재 내의 변형량은 증가하였다. HRTEM 분석 결과 고에너지 이온주입시 결함은 표면 부근에 희박하고 Rp 부근에 집중되어 있었다. 또한 이온주입 상태의 결함층은 dark band의 형태로 존재하였으며 열처리시 이차결함은 이곳으로부터 생성됨이 관찰되었다. 3MeV P+,$1X1015extrm{cm}^2$의 조건으로 이온주입된 실리콘 시편의 열처리에 따른 X-ray rocking curve 분석을 통하여 열처리 온도가 $550^{\circ}C$에서 $700^{\circ}C$로 증가함에 따라 모재 내부의 최대 변형량이 7X10-4에서 2.9X10-4으로 감소함이 관찰되었다. 특히 $550^{\circ}C$ 열처리한 시편의 경우 표면으로부터$-1.5mu$m 영역에 작은 변형층이 넓게 잔존하였으며 열처리온도를 $700^{\circ}C$로 증가한 경우 제거되었다. 이온주입시 생성된 일차결함들은 $700^{\circ}C$ 열처리시 $60^{\circ}$ 전위와 <112> 막대 모양 결함, $1000^{\circ}C$ 열처리시 <110>방향의 전위루프로 열처리 조건에 따라 여러 가지 모양의 이차결함으로 변화하였다. 고에너지 이온주입에 의해 발생한 이차결함은 고온에서도 안정하여 고온 열처리에 의한 제거가 용이하지 않았다.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.218-222
• /
• 1996

STrained layers and strain depth profile of high dose As ion implanted (100) si wafer annealed at various temperatures have been investigated by means of X-ray double crystal diffractometry (X-ray DCD). The results obtained by x-ray rocking curve analysis showed a defect layer at the original amorphous /crystalline interface of 1400$\AA$ depth. In addition arsenic ion concentrtion profiles and defect distributions in depth were obtained by the SIMS and TRIM -code simulation . the positive strain depth profile determined from the rocking curve analysis were only presented under 0.14 $\mu$m from the surface for samples ananelaed at $600^{\circ}C$. The results was shown that the thickness of amprphous layer is 0.14 $\mu$m indirectry, and it was good agreement with the TRIM -Code simulation. Additionally, it could be thought that the positive strain have been affected residual intersitial atoms under the amorphous/crystalline interface formed by ion implantation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.263-268
• /
• 1998

(100) ZnSe crystals with twin and grain free were grown by vapor transport method. The defect in (100) ZnSe crystals was investigated by FWHM of X-ray Rocking Curve. The growth rate and seed quality are the main parameters of the growth process to obtain the high quality ZnSe crystals. The geometric shape of the grown (100) ZnSe crystal is dependent on the shape of seed, isothermal line in furnace and the growth rate of each surface in crystal.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.6
• /
• pp.105-110
• /
• 2002

ZnTe epilayers have been successfully grown on (100) CaAs substrate by hot wall epitaxy (HWE) with Zn reservoir. Optimum growth condition has been determined by a four-crystal rocking curve (FCRC). It was found that Zn partial pressure from h reservoir has a strong influence on the quality of grown films. Under the determined optimum growth condition, ZnTe epitaxial films with thickness of 0.72~24.8${\mu}m$ were grown for studying the effect of the thickness on crystalline quality. The FCRC results indicated that the quality of ZnTe films becomes higher rapidly with increase of thickness up to 6${\mu}{\textrm}{m}$. The best value of the FWHM of the few crystal rocking curve, 66 arcsec, was obtained on the film with $12{\mu}m$ in thickness. Until now, this result shows the best quality of ZnTe/GaAs films in reported.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05a
• /
• pp.44-44
• /
• 1992

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.77-77
• /
• 1993

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.2
• /
• pp.37-42
• /
• 2000

The comparative study of texture of Al/Ti thin films deposited on low-dielectric polymer and $SiO_2$substrates has been investigated. Fifty-nm-thick Ti films and 500-nm-thick Al-1%Si-0.5%Cu (wt%) films were deposited sequentially onto low-k polymers and $SiO_2$by using a DC magnetron sputtering system. The texture of Al thin film was determined using X-ray diffraction (XRD) theta-2theta ($\theta$-2$\theta$) and rocking curve and the microstructure of Al/Ti films on low-k polymer and $SiO_2$substrates was characterized by cross-sectional transmission electron microscopy (TEM). Both the $\theta$-2$\theta$ method and rocking curve measurement suggest that Al/Ti thin films deposited on $SiO_2$have stronger texture than those deposited on low-k polymer. The texture of Al thin films strongly depended on that of Ti films. Cross-sectional TEM revealed that grains of Ti films on $SiO_2$substrates had grown perpendicular to the substrate, while the grains of Ti alms on SiLK substrates were formed randomly. The lower degree of (111) texture of Al thin films on low-k polymer was due to Ti underlayer.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.45-52
• /
• 2019

In this study, the seismic strengthening technique considering the rocking behavior of the wall was developed. The rocking system rotates left and right around the vertical axis of the wall. The development system is a method of dissipating energy by installing a damper which was attached at a large displacement portion. The damper was made of a steel material, and the shape and height of the strut were selected as variables. Experimental results showed that in case of shorter strut make strength capacity increasement and in case of longer strut make deformation capacity increasement. As a result of comparing the abilities according to I and S type strut shapes, it was evaluated that S type has better seismic performance.