• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.291-294
• /
• 2012

The research and development status of combustion chamber of liquid rocjet engine for Korea Space Launch Vehicle(KSLV-II) are briefly described. The cold and hot firing tests of uni-element injector, the performance/heat flux measurement/hot firing tests of subscale combustion chamber and the performance/stability rating/regenerative cooling/hot fire tests of 30ton-class combustion chamber were successfully performed. Based on these results, the research and development of combustion chamber for 75ton-class liquid rocket engine are underway.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.54-58
• /
• 2017

A combustion instability has been one of the most serious problems in the development of combustion devices including rocket engine and gas turbine. In particular, a high-frequency combustion instability generated by resonant coupling between combustion phenomena and acoustic oscillations within thrust chamber causes severe damage to the hardware. Because it is accompanied by high amplitude pressure oscillations and excessive heat flux to the chamber wall. Therefore, combustion instability is one of the difficult problems that must be resolved in developing liquid rocket engine. This paper describes the cases of combustion instability encounted during the development of thrust chamber for KSR-III and KSLV-II.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.547-550
• /
• 2008

A solid rocket motor has quite complex physical condition such exothermal chemical reaction in subsonic area and supersonic ex pansion in a converging-diverging nozzle. To introduce a simulation tool for compressible flow in supersonic range as well as incompressible chemical reaction zone in a whole rocket nozzle is a essential demand. Since the flow vary subsonic to super sonic, the convergence in computation becomes very low and unstable in a whole domain of rocket motor. This paper reports the 2-D Axisymmetric and simple 3-D solid propellant combustion and flow of gases in rocket motor by using a precondi tioning, shear stress turbulence modeling, AUSM(p). To simulate the simplified combustion process, Double base solid propellant is used to calculate reaction of solid propellant.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.1
• /
• pp.21-29
• /
• 2002

Hybrid propulsion systems provide many advantages in terms of stable operation and safety. However, classical hybrid rocket motors have lower fuel regression rate and combustion efficiency compared to solid propellant rocket motor. The recent research efforts are focused on the improvement of volume limitation and regression rate in the hybrid rocket engine. The present study has numerically investigated the combustion processes in the hybrid rocket engine. The turbulent combustion is represented by the eddy breakup model and Hiroyasu and Nagle and Strickland-Constable model are used for soot formation and soot oxidation. Radiative heat transfer is modeled by finite volume method. To reduce the uncertainties for convective heat transfer near solid fuel surface having strong blowing effect, the Low Reynolds number $\kappa-\varepsilon$ turbulent model is employed. Based on numerical results, the detailed discussion has been made for the turbulent combustion processes in the vortex hybrid rocket engine.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3154-3158
• /
• 2008

A liquid rocket engine performance has been analyzed as a function of combustion pressure with LOx/RP-1R. The present method is verified by comparing the specific impulse for various combustion pressure with given pump head model. The optimal combustion pressure is between 150 bar and 200 bar for given efficiencies. Both the optimal combustion pressure and the specific impulse increase for increased turbine efficiency. The optimal combustion pressure decreases and the specific impulse increases for increased combustion efficiency. The pump efficiency and the turbine inlet temperature have the same qualitative effect as the turbine efficiency.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.5
• /
• pp.51-59
• /
• 2016

STS 321 stainless steel is generally used for a material of high-temperature and high-pressure system including liquid rocket engine. The constitutive equation for flow stress has been suggested using thermal stress component and athermal stress component based on Kocks dislocation barrier model to predict 321 stainless steel's deformation behavior at elevated temperature. The suggested model predicted well the material deformation behaviors of 321 stainless steel at the wide temperature range from room temperature to $500^{\circ}C$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.127-130
• /
• 2003

This paper presents the numerical thermal analysis for regeneratively cooled rocket thrust chambers. An integrated numerical model incorporates computational fluid dynamics for the hot-gas thermal environment, and thermal analysis for the liner and coolant channels. The flow and temperature fields in rocket thrust chambers is assumed to be axisymmetric steady state which is presumed to the combustion liner. The heat flux computed from nozzle flow is used to predict the temperature distribution of the combustion liner. As a result, we present the wall temperature of combustion liner and the temperature change of coolant.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.3032-3038
• /
• 1994

The paper discusses a combustion instability phenomena encountered in recent solid rocket motor development efforts at ADD(Agency for Defense Development). It has happened to occur as an irregular burning in development of smokeless propellant rocket motor. Through investigating the spectral analysis of accelerometer and strain gage signals which are recorded in static firing tests and acoustic modal analysis of motor inside cavity with ANSYS, the instability is found to be the second tangential mode.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.4
• /
• pp.184-190
• /
• 2022

In an attempt to apply hybrid rocket to the RATO (Rocket-Assisted Take Off) system, combustion characteristics of the non-circular grain were figured out in this study. Having larger combustion area, it was reconfirmed that the non-circular grain has advantages over regression rate, characteristic velocity and chamber pressure in which all gave higher values. Experiments were performed to understand the effect of the non-circular grain geometry over time where local regression rates depending on grain location were analyzed. It was found that the regression rate of five distinct locations were different. Partial conclusion driven was that these differences are due to the heat transfer caused by dissimilar distances from the flame layer. Besides, as combustion duration increased, the fuel port became circular, and the regression rate converged to a single value over the whole grain.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.229-232
• /
• 2009

DC-shift phenomenon can be observed in Hybrid rocket combustion. This phenomenon makes performance drop which is structure problem or reduce thrust. Understanding of DC-shift phenomenon, the conditions of the hybrid rocket combustion stability can be found. In this paper, the condition of DC-shift was found and made by using acoustic mode and vortex shedding frequency. The conditions of stable combustion was defined from the experimental study of DC-shift phenomenon.