• Tunnel and Underground Space
• /
• v.18 no.2
• /
• pp.125-133
• /
• 2008

The rock treatment methods for improving bearing capacity and reducing settlement of the underground roadway structure foundation on fractured rock was studied in this paper. Also, effective reinforcement scheme was evaluated by numerical analysis for the application to the practical construction. Various in-situ and laboratory tests were executed systematically at Yeongi-goon, Ohoongchungnam-do, Korea, for the purpose of defining the physical and mechanical properties of rock. Consequently the effective treatment methods insuring the bearing capacity of fractured rock were proposed. In addition, the adequate reinforcing depth of the comparatives measure, such as double rod, triple rod injection methods and micropile, were investigated from the case study. Finally, the most effective construction scheme with the consideration of safety and economical aspects were proposed by using numerical analysis(Plaxis ver. 8.2).

• Journal of Conservation Science
• /
• v.25 no.1
• /
• pp.87-100
• /
• 2009

We carried out the effect verification of conservation treatment focusing on basement rock of alkali granite at the Yukjonbul (two-pairs of Buddha Triads) carved on rock cliff of Samneung valley in Namsan mountain of Gyeongju. The conservation treatments were used to ethylsilicate-type rock consolidant and epoxy-type resin. It is treatment method that the epoxy-type resin have been applied one time into the exfoliation area, after rock consolidation treatment have been worked for three times. As the result of measuring ultrasonic velocity, P-wave velocity of the exfoliation area was relatively increased after applied the conservation treatments. The ultrasonic velocity of all area was increased as 27.8%. This result has been proved with consolidation effects by consolidant and filler for stone cultural heritages. The treatment method should be worked about three time to consolidate sufficiently for rocks.

• Geomechanics and Engineering
• /
• v.32 no.1
• /
• pp.85-96
• /
• 2023

Microbially induced carbonate precipitation (MICP) is extensively discussed as a promising topic for ground stabilization. The practical effect of stabilizing the expansive soil is presented in this paper with a logical process from the bacterial activity to the treatment technology. Temperature, pH, shaking frequency, and inoculation amount are discussed to evaluate the bacterial activity. The physic-mechanic properties are also evaluated to discuss the effect of the MICP process on expansive soil. Results indicate that the MICP method achieves the mitigation of expansion. The treated soil has a low proportion of fine particles (< 5 ㎛), the plasticity index significantly decreases, and strength values improve much. MICP process has a significant cementation effect on the soil matrix. Moreover, the infiltration model test presents the coating effect on the topsoil. According to the relation between the CaCO₃ content and the treatment effect, the topsoil has better treatment than the deeper soil.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.431-445
• /
• 2022

A quantitative phase analysis method of X-ray powder diffraction was studied to determine the mineral content of clay-rich rocks practically as well as effectively. For quantitative X-ray powder diffraction analysis of the clay-rich rocks, it is necessary to prepare whole-rock powder samples with a random orientation by side mounting method. In addition, for the identification of the clay minerals in the rock, it is required to prepare an oriented mount specimen with a clay particle size of 2 ㎛ or less, ethylene glycol treatment, and heat treatment. RIR (reference intensity ratio) and Rietveld method were used for the quantitative analysis of the clay-rich rocks. It was possible to obtain the total clay and the non-clay minerals contents from the whole-rock X-ray diffraction profiles using the RIR values. In addition, it was possible to calculate the relative content of each clay mineral from the oriented X-ray diffraction profiles of the clay particle size and assign it to the total clay. In the Rietveld method of whole-rock X-ray diffraction, effective quantitative values were obtained from the Rietveld diffraction patterns excluded the region of less than 10 degrees (2θ). Similar quantitative values were shown in not only the RIR but the Rietveld methods. Therefore, the analysis results indicate a possibility of a routine quantitative analysis of clay-rich rocks in the laboratory. However, quantitative analysis of clay minerals is still a challenge because there are numerous varieties of clay minerals with different chemical and structural characteristics.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.4
• /
• pp.64-73
• /
• 1999

This study was conducted to find out the effects of hydroseeding material and seed mixture on the revegetation of rock cut-slopes by PEC4 (Polymer-Ecology-Control) Hydroseeding Measures. PEC4 hydroseeding material was applied to four cut-slopes using hydroseeding measures from April to August, 1999, and the field survey was carried out by monthly. PEC4 material consisted of bark compost and organic soil amendments. This material has high content of organic matter and high level of water holding capacity. PEC4 hydroseeding material shows low level of soil hardness, so it gives to good condition for seed germinating and plant growing in early stage. PEC4 material attached at rock cut-slopes by two types of adhesive agent was not eroded by rainfall. The plant coverage and number of plant species were affected by mixing ratio of seeds and seeding timing. From the viewpoint of plant establishment, the optimal hydroseeding timing of mixed seeds for plant growth seems to be in May. Most of the plant seeds were germinated well and they covered rock cut-slopes so quickly and effectively. Plant importance value of Silene armeria and Platycodon grandiflorum. were higher than any other seeded-native species in the competition between native species and exotic species, so they have enough possibility to be used for slope revegetation works. Thus it leads to conclusion that the revegetation method used in this experiment was a very effective method for plant establishment on rock cut-slopes.

• The Journal of Engineering Geology
• /
• v.11 no.2
• /
• pp.205-214
• /
• 2001

A simple automated measuring method for planar or linear features on the rock excavation surface is presented. Attitude of the planar and linear feature is calculated from 3D coordinates of points on the structures. Spatial coordinates are calculated from overlapped stereo images. Factors used in the calculation are (1) local coordinates of the left and right images, (2) the focal length of cameras, and (3) the distance between two cameras. A simple image capturing device and an image treatment routine coded by Visual Basic and GIS components are constructed for the remote measurements, The methodology shows less than 1 cm error when a point is measured from 179 cm in distance. The methodology is tested at the excavation site in PaiChai University. Remotely measured result matches well with the manual measurement within the reasonable error range.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.2
• /
• pp.78-84
• /
• 2006

A high performance liquid chromatography assay method for spiramycin in fish muscle was developed. The developed method was evaluated and validated by monitoring spiramycin in olive flounder (Paralichthys olivaceus), black rock fish (Sebastes schlegeli) and in live conger eel (Anguilla japonica) in fish farms and distribution centers. Using the developed method, the recovery rate was up to 82.4-88.8%, which was higher than that of conventional methods (77.6-87.1%). In particular, the proposed sample treatment protocol was suitable for use with fish samples to remove low molecular weight materials and pigments that could interfere an accurate analysis. The prepared stock solution was very stable, and it remained chemically stable for 5 weeks at $4^{\circ}C$. The performance limit of the developed method for spiramycin acid in fish muscle was 0.05 ppm. One hundred thirty-four fish samples including olive flounder, black rock fish and live conger eel were analyzed to evaluate the overall efficiency of the modified method and to monitor the actual condition of spiramycin usage in fish farms. Olive flounder and black rock fish were collected from fish farms in coastal areas of Korea, and live conger eels were purchased from a fish market in the Busan area from September 2001 to March 2002. According to the overall performance of the developed method, it was considered suitable for the monitoring of spiramycin in fish muscle. The suggested method of analysis for spiramycin in fish muscle is registered in the Korean Official Methods of Food Analysis and is currently tieing utilized for fishery products inspection by the Korea Food and Drug Administration and the National Fisheries Products Quality Inspection Service.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.4
• /
• pp.247-254
• /
• 1994

This study was conducted to characterize the chemical and mineralogical properties of representative phosphate rocks from North Carolina and Florida, and to find out the method for increasing the citric acid (two percent) solublility of phosphate rock. The the results are summerized as follows : 1. Major composition of phosphate rock was carbonate apatite containing small amounts of calcite and quartz. The differential thermal analysis(DTA) did not show endothermic or exothermic peak till $1,000^{\circ}C$. 2. Two percent citric acid solublility of phosphate rock was increased with the finess of particle size, but the water solublility was not affected by the particle size. Long time calcinated under high temperature had negative effect, while the incubation with 2% citric acid under low temperature had positive effect on solubility. 3. To increase the solubility of phosphate rock it was mixed with farmyard and barnyard manure and acidulated. Citrate solubility by treatment with sulfuric acid was more effective than nitric acid. Acidulation with thirty percent sulfuric acid increased both citric acid solubility and water solublility. Treatment with glutamic acid had little effect on the solubility of phosphate rock.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.4
• /
• pp.8-11
• /
• 2009

This study introduced wastewater treatment method by High Gradient Magnetic Separation (HGMS). HGMS treatment was high efficient method for various industrial wastewaters. The system is currently research state, but we have surveyed commercialize the technology for industry. In rolling plate process, coolant wastewater was recycled by sedimentation and sand filter system. It needs several large reservoirs and long time to remove suspended solid (SS) like metal fines and iron oxide in hot rolling plate making process. If removing rate of suspended solid in rolling coolant wastewater is improved by using HGMS system, the productivity of working process can be increased and the area of reservoir can be reduced. We manufactured high temperature superconducting HGMS system that had a purpose to treatment of coolant wastewater in rolling plate process. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel 430 mesh, which is a core component in the magnetic separation system, In our basic preliminary experiment using HGMS system, it has been clear that the fine paramagnetic particles in the coolant wastewater obtained from rolling plate process of POSCO can be separated with high efficiency.

• Journal of Adhesion and Interface
• /
• v.16 no.2
• /
• pp.69-75
• /
• 2015

Stone board for the rock bed was needed to reduce weight using thin thickness and reinforced materials. In this work, stone/wood board for rock bed was studied. Stone and wood were attached to reduce total weight of stone for rock bed. For reinforcing wood heat treatment method was used to change surface and mechanical properties. Mechanical strength of heat treated wood increased more than neat condition. The optimum heat treatment condition was set on $100^{\circ}C$ under tensile, flexural loads whereas surface energy was also obtained by contact angle measurement. Optimum adhesive condition was to get the maximum adhesion between stone and wood. Lap shear test was performed for stone/wood board with different adhesives such as amine type epoxy, polyurethane, chloro-rubber and vinyl chloride acetate type. Fracture surface of lap shear test was shown at wood fracture part on stone using amine type epoxy adhesive. It was found that for high adhesion between stone and wood the optimum adhesive was epoxy type for the rock bed.