• 제목/요약/키워드: Rock treatment method

검색결과 45건 처리시간 0.028초

기반암의 파쇄대 특성을 고려한 지하차도 기초 보강사례 (The Case Study of Rock Treatment Method for the Fractured Rock Foundation of Underground Roadway Structure)

  • 윤지남;양성돈;이근하;박사원;정헌철
    • 터널과지하공간
    • /
    • 제18권2호
    • /
    • pp.125-133
    • /
    • 2008
  • 본 고에서는 파쇄대가 존재하는 기반암 상부에 지하차도를 계획하는 경우, 하부지반의 지지력 증대 및 침하량 감소 목적으로 적용할 수 있는 기초 보강공법에 대하여 연구하였다. 보강효과 및 적정 설치간격을 수치해석적으로 예측함으로써 실제 시공시 기초자료로 활용할 수 있도록 하였다. 이를 위해, 충청남도 연기군 지역에서 수행된 시추조사, 물리탐사 및 실내 실험결과 등을 분석하여 그 결과로부터 파쇄대의 물리적, 역학적특성을 파악하고 지하차도의 지내력을 확보할 수 있는 효과적인 보강대책을 검토하였다. 아울러, 보강사례에서 조사된 공법들 중 이중관 고압분사 공법, 삼중관 고압분사 공법, 마이크로 파일 등의 적정 보강심도를 선정하였으며, 수치해석(Plaxis 8.2 프로그램)을 통해 설치간격 등을 변화시켜가면서 동일한 안정성을 기준으로 가장 효과적인 공법의 제원을 비교 검토하였다.

석조문화재 적용을 위한 강화제 및 충전제 현장실험 : 초음파 속도를 이용한 일차검증 (Field Experiments of Consolidant and Filler for Stone Cultural Heritage: Primary Verification Using Ultrasonic Velocity)

  • 송치영;전병규;한민수;이장존;김사덕
    • 보존과학회지
    • /
    • 제25권1호
    • /
    • pp.87-100
    • /
    • 2009
  • 알칼리화강암으로 구성된 경주 남산 삼릉계곡 선각육존불 주변 암반을 대상으로 보존처리제 성능을 평가하였다. 이 연구에 적용된 보존처리제는 에틸실리케이트 계열의 암석 강화용 처리제와 에폭시 계열의 수지이다. 처리과정은 에폭시 계열의 수지를 박리면에 주입 후 암석 강화용 처리제를 총 3차례 도포 하였으며, 처리 전과 후의 물성 변화를 비교하기 위해 초음파 속도를 측정하였다. 초음파속도 측정 결과, 박리면 주변의 저속도대는 강화제 및 충전제 처리 후 평균 27.8%의 속도 증가가 나타났다. 이 결과는 석조문화재에 대한 보존처리제의 강화 효과를 입증하는 것으로서, 최소 3회 정도를 처리하는 것이 효과를 극대화 시키는 것으로 나타났다.

  • PDF

Experimental study on Microbially Induced Calcite Precipitation for expansive soil stabilization

  • Zheng Lu;Yu Qiu;Jie Liu;Chengcheng Yu; Hailin Yao
    • Geomechanics and Engineering
    • /
    • 제32권1호
    • /
    • pp.85-96
    • /
    • 2023
  • Microbially induced carbonate precipitation (MICP) is extensively discussed as a promising topic for ground stabilization. The practical effect of stabilizing the expansive soil is presented in this paper with a logical process from the bacterial activity to the treatment technology. Temperature, pH, shaking frequency, and inoculation amount are discussed to evaluate the bacterial activity. The physic-mechanic properties are also evaluated to discuss the effect of the MICP process on expansive soil. Results indicate that the MICP method achieves the mitigation of expansion. The treated soil has a low proportion of fine particles (< 5 ㎛), the plasticity index significantly decreases, and strength values improve much. MICP process has a significant cementation effect on the soil matrix. Moreover, the infiltration model test presents the coating effect on the topsoil. According to the relation between the CaCO3 content and the treatment effect, the topsoil has better treatment than the deeper soil.

점토질 암석의 광물정량 분석법 연구 (A Study of Mineral Quantification on Clay-Rich Rocks)

  • 손병국;안기오
    • 광물과 암석
    • /
    • 제35권4호
    • /
    • pp.431-445
    • /
    • 2022
  • 점토질 암석의 광물함량을 효과적이고 실용적으로 분석하는 방법을 X-선 분말회절분석 실험을 통하여 연구하였다. 점토질 암석의 X-선 분말회절 정량분석을 위해서는 측면마운팅(side mounting) 방법에 의한 무작위 배향(random orientation)의 전암(whole-rock) 분말시료의 준비가 필요하다. 또한, 암석을 구성하고 있는 점토광물의 감정을 위하여 2 ㎛ 이하 점토입도의 배향성 마운트(oriented mount)시편의 준비와 에틸렌글리콜 처리, 열처리 등의 실험과정이 요구된다. 정량분석을 위하여 RIR(reference intensity ratio)방법과 리트벨트(Rietveld) 회절도 계산 방법을 사용하였다. RIR값을 사용하여 전암 X-선 회절도로부터 총 점토 함량과 비점토광물(non-clay minerals)들의 함량을 얻을 수가 있었다. 또한, 점토입도의 배향성 X-선 회절도로부터는 각각 점토광물의 상대함량을 계산하여 이를 총 점토광물에 할당할 수가 있었다. 전암 X-선 회절의 리트벨트 방법에서는 10°(2θ) 미만의 X-선 회절 영역은 제외한 후에 리트벨트 회절도를 계산하였을 때 효과적인 정량분석 값을 얻을 수 있었다. 분석결과는 RIR방법과 리트벨트 방법이 서로 근사한 정량분석 값을 보여주었다. 따라서, 연구결과는 실험실에서의 일상적인 점토질암의 광물정량분석을 성공적으로 수행하는 것이 가능함을 지시한다. 그러나, 점토광물은 화학적 및 구조적 특정이 다른 수많은 변종이 존재하기 때문에 점토질암의 정량분석은 아직도 도전해야 하는 과제이다.

암비탈면 녹화용 환경친화적 PEC4 공법의 시공 (In Case of Treatment of PEC4 Hydroseeding Measures for Revegetation of Rock Cut-Slopes)

  • 김경훈;김학영;황애민;이승은
    • 한국환경복원기술학회지
    • /
    • 제2권4호
    • /
    • pp.64-73
    • /
    • 1999
  • This study was conducted to find out the effects of hydroseeding material and seed mixture on the revegetation of rock cut-slopes by PEC4 (Polymer-Ecology-Control) Hydroseeding Measures. PEC4 hydroseeding material was applied to four cut-slopes using hydroseeding measures from April to August, 1999, and the field survey was carried out by monthly. PEC4 material consisted of bark compost and organic soil amendments. This material has high content of organic matter and high level of water holding capacity. PEC4 hydroseeding material shows low level of soil hardness, so it gives to good condition for seed germinating and plant growing in early stage. PEC4 material attached at rock cut-slopes by two types of adhesive agent was not eroded by rainfall. The plant coverage and number of plant species were affected by mixing ratio of seeds and seeding timing. From the viewpoint of plant establishment, the optimal hydroseeding timing of mixed seeds for plant growth seems to be in May. Most of the plant seeds were germinated well and they covered rock cut-slopes so quickly and effectively. Plant importance value of Silene armeria and Platycodon grandiflorum. were higher than any other seeded-native species in the competition between native species and exotic species, so they have enough possibility to be used for slope revegetation works. Thus it leads to conclusion that the revegetation method used in this experiment was a very effective method for plant establishment on rock cut-slopes.

  • PDF

암반 불연속면의 원격 영상측량 기법 (A Remote Measurement Technique for Rock Discontinuity)

  • 황상기
    • 지질공학
    • /
    • 제11권2호
    • /
    • pp.205-214
    • /
    • 2001
  • 암반 절취면에 분포하는 면과 선구조를 원격으로 측정하는 단순 장치를 소개한다. 지질구조의 배열은 구조면이나 선분상에 존재하는 3개 이상의 점에 대한 3차원 좌표를 이용하여 계산된다. 좌표들은 두 폐쇄회로 카메라의 영상에서 계산되며, 계산에 활용되는 변수들은 (1) 영상에서의 동일지점에 대한 좌표 (2) 카메라의 초점거리 (3) 두 카메라의 기선거리 이다. 영상측량을 위하여 영상 획득을 위한 장치와 Visual Baisc 언어와 GIS 콤퍼넌트를 이용한 전산 프로그램이 개발되었다. 개발된 방법을 이용한 측정결과 179cm의 거리에서 원격으로 측정된자료가 1cm 이하의 오차를 보이고 있다. 원격측정법을 이용하여 배재대학 교내의 암반 절취면에 분포하는 면구조를 측정한 결과 수작업으로 측정한 면의 배열방향과 허용 오차범위 이내에서 일치하는 결과를 보이고 있다.

  • PDF

HPLC를 이용한 어류 중의 Spiramycin 분석 (Analysis of Spiramycin in Fish Using High Performance Liquid Chromatography)

  • 이태식;이희정;조미라;변한석;손광태;박미정;이영호
    • 한국수산과학회지
    • /
    • 제39권2호
    • /
    • pp.78-84
    • /
    • 2006
  • A high performance liquid chromatography assay method for spiramycin in fish muscle was developed. The developed method was evaluated and validated by monitoring spiramycin in olive flounder (Paralichthys olivaceus), black rock fish (Sebastes schlegeli) and in live conger eel (Anguilla japonica) in fish farms and distribution centers. Using the developed method, the recovery rate was up to 82.4-88.8%, which was higher than that of conventional methods (77.6-87.1%). In particular, the proposed sample treatment protocol was suitable for use with fish samples to remove low molecular weight materials and pigments that could interfere an accurate analysis. The prepared stock solution was very stable, and it remained chemically stable for 5 weeks at $4^{\circ}C$. The performance limit of the developed method for spiramycin acid in fish muscle was 0.05 ppm. One hundred thirty-four fish samples including olive flounder, black rock fish and live conger eel were analyzed to evaluate the overall efficiency of the modified method and to monitor the actual condition of spiramycin usage in fish farms. Olive flounder and black rock fish were collected from fish farms in coastal areas of Korea, and live conger eels were purchased from a fish market in the Busan area from September 2001 to March 2002. According to the overall performance of the developed method, it was considered suitable for the monitoring of spiramycin in fish muscle. The suggested method of analysis for spiramycin in fish muscle is registered in the Korean Official Methods of Food Analysis and is currently tieing utilized for fishery products inspection by the Korea Food and Drug Administration and the National Fisheries Products Quality Inspection Service.

인광석분말(燐鑛石粉末)의 특성(特性)과 온도(溫度) 및 산처리(酸處理)에 의한 구용율(枸溶率) 증대(增大) (Characteristics of Phosphate Rock and Increasing of Citrate Solubility by Temperature and Acidulation)

  • 임동규;정이근;신제성;김흥배
    • 한국토양비료학회지
    • /
    • 제27권4호
    • /
    • pp.247-254
    • /
    • 1994
  • 인광석분말(燐鑛石粉末)의 화학(化學) 및 광물학적(鑛物學的) 특성(特性)을 구명하고 인광석분말(燐鑛石粉末)의 구용성(枸溶性) 인산함량(燐酸含量)을 증대시키기 위한 시험을 수행하여 인광석분말(燐鑛石粉末)의 직접시용(直接施用)을 위한 기초자료(基礎資料)를 얻기 위해 실시한 결과를 요약(要約)하면 다음과 같다. 1. 인광석(燐鑛石)의 주광물(主鑛物)은 인회석(燐灰石)(Apatite, $Ca_5(PO_4)_3$ OH, F, Cl) 중(中) Carbonate apatite이었으며 부광물(副鑛物)로는 방해석(方解石)과 석영(石英) 등(等)이 함유되어 있었고 시차열분석(示差熱分析)(DTA)결과를 보면 $1,000^{\circ}C$까지 뚜렷한 흡열(吸熱)이나 발열(發熱)peak를 볼 수 없었다. 2. 인광석분말(燐鑛石粉末)은 입도(粒度)가 가늘어질수록 구용성(枸溶性) 인산함량은 증가(增加)하나 수용성(水溶性) 인산함량은 입도(粒度)에 관계없이 증가(增加)하지 않았고, 소성(燒成)할 경우 소성시간(燒成時間)이 길어질수록 구용율(枸溶率)은 감소하였으며, 항온온도(恒溫溫度)가 높거나 항온시간(恒溫時間)이 길어질수록 구용율(枸溶率)이 증가하였다. 3. 인광석분말(燐鑛石粉末)을 퇴구비(堆廐肥)와 발효(醱酵)시키거나 산처리(酸處理)를 하면 인산구용율(燐酸枸溶率)이 증가하며 산농도(酸濃度)가 동일할 경우에는 황산(黃酸)이 질산(窒酸) 보다 우수하였다. 30% 황산처리(黃酸處理)는 기간이 진전될수록 구용성(枸溶性) 및 수용성(水溶性) 인산함량(燐酸含量)이 증가하였으나 당밀폐액(糖蜜廢液)처리는 크게 증가하지 않았고, 30% 황산처리(黃酸處理) 후 당밀폐액(糖蜜廢液)으로 제립(製粒)한 시험제품이 당밀폐액(糖蜜廢液)만 처리한 시험제품 보다 구용성(枸溶性) 및 수용성(水溶性) 인산함량(燐酸含量)이 높았다.

  • PDF

The treatment of coolant wastewater of rolling plate process by High Gradient Magnetic Separation

  • Kim, Tae-Hyung;Ha, Dong-Woo;Kwon, Jun-Mo;Sohn, Myung-Hwan;Baik, Seung-Kyu;Oh, Sang-Soo;Ko, Rock-Kil;Kim, Ho-Sup;Kim, Young-Hun;Park, Seong-Kuk
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제11권4호
    • /
    • pp.8-11
    • /
    • 2009
  • This study introduced wastewater treatment method by High Gradient Magnetic Separation (HGMS). HGMS treatment was high efficient method for various industrial wastewaters. The system is currently research state, but we have surveyed commercialize the technology for industry. In rolling plate process, coolant wastewater was recycled by sedimentation and sand filter system. It needs several large reservoirs and long time to remove suspended solid (SS) like metal fines and iron oxide in hot rolling plate making process. If removing rate of suspended solid in rolling coolant wastewater is improved by using HGMS system, the productivity of working process can be increased and the area of reservoir can be reduced. We manufactured high temperature superconducting HGMS system that had a purpose to treatment of coolant wastewater in rolling plate process. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel 430 mesh, which is a core component in the magnetic separation system, In our basic preliminary experiment using HGMS system, it has been clear that the fine paramagnetic particles in the coolant wastewater obtained from rolling plate process of POSCO can be separated with high efficiency.

열처리 조건에 따른 목재의 계면과 기계적 물성 및 돌침대용 석재/목재간 접착제에 따른 접착력 평가 (Interfacial and Mechanical properties of Different Heat Treated Wood and Evaluation of Bonding Property between Stone and Wood for Rock Bed)

  • 권동준;신평수;최진영;문선옥;박종만
    • 접착 및 계면
    • /
    • 제16권2호
    • /
    • pp.69-75
    • /
    • 2015
  • 돌침대에 사용되는 석재의 무게를 줄여 경량화를 추구하려면 석재의 두께를 줄이고 보강재료로 석재의 강도를 유지해야 한다. 본 연구에서는 돌침대용 석재/목재 보드 개발에 대한 연구를 진행하였다. 돌침대에 삽입될 돌의 무게를 줄이기 위해 석재와 목재를 접합하였다. 목재의 강도 향상과 표면개질을 위하여 열처리 조건에 따른 목재의 물성변화를 관찰하였다. 대기 조건에서 열처리한 목재의 경우 고온의 온도에 따라 목재의 강성이 높아졌다. 열처리 최적조건은 표면에너지와 인장, 굴곡 강도변화 경향을 바탕으로 $100^{\circ}C$ 조건임을 확인하였다. 석재와 목재간 높은 접착력을 확보하기 위해 최적의 접착제 조성을 연구하였다. 아민계 에폭시 접착제, 폴리우레탄(PU)계 접착제, 염화고무계(CR) 접착제 마지막으로 염화비닐초산계 접착제에 따른 석재와 목재간 랩 전단실험을 진행하였다. 랩 전단 실험 후 파단면을 관찰해볼 때 에폭시 접착제를 이용할 때 목재 기지의 인열 파괴가 발생되었다. 접착면에서의 전단력이 목재 자체의 파괴 강도보다 높다는 결과를 바탕으로 최적의 접착제 조건이 에폭시계 접착제임을 확인할 수 있었다.