• 한국지반공학회논문집
• /
• 제37권2호
• /
• pp.33-48
• /
• 2021

현수교의 지중정착식 앵커리지는 기초 암반이 신선할 경우에 적용될 수 있는 형식으로, 앵커리지 형식 중 환경성과 경제성 측면에서 뚜렷한 장점이 있다. 그러나 케이블 하중 재하시 암반의 거동특성이 아직 명확하게 규명되지 않았고 설계기법이 정립되어 있지 않아, 실무자들이 구조물 계획을 수립하는데 많은 어려움을 겪고 있다. 본 연구에서는 국내 도서지역의 경암 지반에 계획된 지중정착식 앵커리지를 대상으로 모형실험과 수치해석을 수행하고 지지암반의 거동 특성을 평가하였으며, 자중과 전단력으로 케이블 하중에 저항하는 비대칭 형태의 암반 쐐기 블록을 제안하였다. 또한 경암 지반에서 강연선 홀 설치를 위한 실규모 시험천공을 실시하고, 경사 천공의 정밀도를 확인하여 지중정착식 앵커리지의 적용 가능성을 평가하였다.

• Computers and Concrete
• /
• 제17권6호
• /
• pp.723-737
• /
• 2016

In this paper an approach was described for determination of direction of sliding block in rock slopes containing planar non-persistent open joints. For this study, several gypsum blocks containing planar non-persistent open joints with dimensions of $15{\times}15{\times}15cm$ were build. The rock bridges occupy 45, 90 and $135cm^2$ of total shear surface ($225cm^2$), and their configuration in shear plane were different. From each model, two similar blocks were prepared and were subjected to shearing under normal stresses of 3.33 and $7.77kg/cm^{-2}$. Based on the change in the configuration of rock-bridges, a factor called the Effective Joint Coefficient (EJC) was formulated, that is the ratio of the effective joint surface that is in front of the rock-bridge and the total shear surface. In general, the failure pattern is influenced by the EJC while shear strength is closely related to the failure pattern. It is observed that the propagation of wing tensile cracks or shear cracks depends on the EJC and the coalescence of wing cracks or shear cracks dominates the eventual failure pattern and determines the peak shear load of the rock specimens. So the EJC is a key factor to determine the sliding direction in rock slopes containing planar non-persistent open joints.

• Advances in concrete construction
• /
• 제7권4호
• /
• pp.241-247
• /
• 2019

In this paper the effect of bedding layer on the failure mechanism of rock in direct shear test has been investigated using particle flow code, PFC. For this purpose, firstly calibration of pfc2d was performed using Brazilian tensile strength. Secondly direct shear test consisting bedding layer was simulated numerically. Thickness of layers was 10 mm and rock bridge length was 10 mm, 40 mm and 60 mm. In each rock bridge length, bedding layer angles changes from $0^{\circ}$ to $90^{\circ}$ with increment of $15^{\circ}$. Totally 21 models were simulated and tested. The results show that two types of cracks develop within the model. Shear cracks and tensile cracks. Also failure pattern is affected by bridge length while shear strength is controlled by failure pattern. It's to be noted that bedding layer has not any effect on the failure pattern because the layer interface strength is too high.

• Computers and Concrete
• /
• 제17권5호
• /
• pp.639-653
• /
• 2016

The present article discusses the effect of the ratio of bridge surface to total shear surface, number of bridge areas and normal stress on the failure behavior of the planar non-persistent open joints. Totally, 38 models were prepared using plaster and dimensions of $15cm{\times}15cm{\times}15cm$. The bridge area occupied $45cm^2$, $90cm^2$ and $135cm^2$ out of the shear surface. The number of rock bridges increase in fixed area. Two similar samples were prepared on every variation in the rock bridges and tested for direct shear strength under two high and low normal loads. The results indicated that the failure pattern and the failure mechanism is mostly influenced by the ratio of bridge surface to total shear surface and normal stress so that the tensile failure mode change to shear failure mode by increasing in the value of introduced parameters. Furthermore, the shear strength and shear stiffness are closely related to the ratio of bridge surface to total shear surface, number of bridge areas and normal stress.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 가을 학술발표회 논문집
• /
• pp.121-128
• /
• 1998

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2011년도 추계 총회 및 창립 30주년 기념 심포지엄
• /
• pp.3-21
• /
• 2011

Laboratory experiments and numerical simulations using Particle Flow Code (PFC2D) were performed to study the effects of joint separation and joint overlapping on the full failure behavior of rock bridges under direct shear loading. Through numerical direct shear tests, the failure process is visually observed and the failure patterns are achieved with reasonable conformity with the experimental results. The simulation results clearly showed that cracks developed during the test were predominantly tension cracks. It was deduced that the failure pattern was mostly influenced by both of the joint separation and joint overlapping while the shear strength is closely related to the failure pattern and its failure mechanism. The studies revealed that shear strength of rock bridges are increased with increasing in the joint separation. Also, it was observed that for a fixed cross sectional area of rock bridges, shear strength of overlapped joints are less than the shear strength of non-overlapped joints.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.99-110
• /
• 2017

In this paper, the effect of normal load on the failure mechanism of echelon joint has been studied using PFC2D. In the first step, calibration of PFC was undertaken with respect to the data obtained from experimental laboratory tests. Then, six different models consisting various echelon joint were prepared and tested under two low and high normal loads. Furthermore, validation of the simulated models were cross checked with the results of direct shear tests performed on non-persistent jointed physical models. The simulations demonstrated that failure patterns were mostly influenced by normal loading, while the shear strength was linked to failure mechanism. When ligament angle is less than $90^{\circ}$, the stable crack growth length is increased by increasing the normal loading. In this condition, fish eyes failure pattern occur in rock bridge. With higher ligament angles, the rock bridge was broken under high normal loading. Applying higher normal loading increases the number of fracture sets while dilation angle and mean orientations of fracture sets with respect to ligament direction will be decreased.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 기초기술학술발표회
• /
• pp.31-42
• /
• 2002

The Design criteria are different from one another due to the different engineering properties of rock in the every nation. Most of the test results of the rock-socketed piers were loaded two times of the design load capacities because they would be used in the foundation of the bridge or the building. So we have much difficulties in study of the load capacities of the rock-socketed piers by the test result in Korea. When we design the rock-socket piers, every designer uses the different formula, and makes different results. Recently the demand of the large bridges and the huge buildings has been increased. The adequate design criterion of the rock-socketed pier is urgently needed to design them reasonable. In this paper we analyzed the various design criteria and proposed the adequate design criterion which is based on the test results of the rock-socked piers in Korea.

• 터널과지하공간
• /
• 제9권3호
• /
• pp.185-193
• /
• 1999

본 연구에서는 2개 터널의 교차부에 설치된 교량에 이동차량하중이 작용될 때 동적해석결과를 제시하였다. 이와 같은 터널내에 위치한 교량은 매우 회귀한 사례로서 구조물의 동적특성은 통상적인 것으로 가정할 수 없을 것이다. 본 연구에서 조사한 교량은 서울 남산1호터널과 남산2호터널의 교차부에 설치된 철근콘크리트교이다. 교차부는 강구조물로된 가시설구조물에 의해 지지되며 이는 2호터널내의 라이닝이 교체되는 기간 동안에 설치될 것이다. 동적해석은 범용유한요소해석 프로그램인 SAP2000을 이용하였다. 이때 구조물, 터널의 라이닝 그리고 주변 암반은 3차원입체요소에 의해 표현되었으며 터널에서 방사되는 탄성파에너지를 모의하기 위하여 외부경계에 점성감쇠장치를 설치하였다. 주행속도에 따른 몇 가지 차량형태를 해석에서 고려하였다. 차량하중을 포함한 유한요소모델은 계측된 속도와 계산된 최대질점속도를 비교하여 검증되었다. 해석으로부터 이 교량에 대한 충격계수는 0.21로 추정되었다. 그러므로 이와 같은 교량구조물의 설계시 충격계수는 설계시방서에서 정한 상한값을 사용할 경우 안전측일 것으로 판단되었다.

• 터널과지하공간
• /
• 제21권2호
• /
• pp.103-108
• /
• 2011

콘크리트 블록에 대한 붙이기 발파실험과 더불어 콘크리트 박스거더 교량의 모형에 대하여 발파해체 실험을 실시하였다. 장약으로는 폭발위력의 기준 약으로 사용되는 TNT를 사용하였다. 실험결과 콘크리트 박스거더 교량의 경우 폭약설치지점의 폭발력뿐 만 아니라 박스거더 내부 벽에 작용하는 폭풍압도 해체에 영향을 미치는 것으로 나타났다.