• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.108-115
• /
• 1997

This paper presents a robust controller design for uncertain nonlinear systems with input saturation. In actual application, the robust controller may require a high input torque so that it faces input saturation due to power limitation of the system. The satruation problem may cause instability of the system. To improve this problem, a robust controller using a fuzzy logic control is proposed. The proposed controller keeps state errors bounded. To validate the proposed controller, an invert pendulum and its control system is set up. The experimental result shows bounded angular position errors under saturated input torques.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.1
• /
• pp.9-16
• /
• 1997

The method of designing robust two degree of freedom(2 DOF) controllers for linear systems with parameter uncertainties and unmodeled dynamics is presented in this paper. Robust performance condition that accounts for robust model matching of closed loop system and disturbance rejection is derived. Using the robust performance condition, the feedback controller is designed to meet robust stability and disturbance rejection specifications, while prefilter is used to improve the robust model matching properties. The $H^{\infty}$ and $\mu$ controller for six degree of freedom vehicle with parameter variations are designed and compared. Simulations for hydrodynamic parameter variations and disturbance are presented to demonstrate the achievement of good robust performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.58-65
• /
• 1999

A magnetic levitation system requires a robustness to overcome a dynamic instability due to disturbances. In this paper a robust controller for a magnetically levitated fine manipulator is presented. The proposed controller consists of following two parts: a model reference controller and an $H_{\infty}$ controller. First, the model reference control stabilizes the motion of the manipulator. Then, the motion of the manipulator follows that of the reference model. Second, the $H_{\infty}$ control minimizes errors generated from the model reference control due to noise and disturbance since the $H_{\infty}$ control is a kind of robust control. The experiments of position control and tracking control are carried out by use of the proposed controller under the conditions of free disturbances and forced disturbances. Also, the experiments using PID controller are carried out under the same conditions. The results from above two controllers are compared to investigate the control performances. As the results, it is observed that the proposed controller has similar position accuracy but better tracking performances comparing to the PID controller as well as good disturbance rejection effect due to the robust characteristics of the controller. In conclusion. it is verified that the proposed controller has the simple control structure, the good tracking performances and good disturbance rejection effect due to the robust characteristics of the controller.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.668-673
• /
• 2010

Given a periodic reference signal or disturbance, repetitive control is a special control scheme to reduce a tracking error effectively by the periodic signal generator in the repetitive controller. In general, a repetitive controller is added on the existing feedback control system to improve the tracking performance. However, because the information used in the design of the feedback controller is not taken into account, the design problem of the repetitive controller is totally another problem irrespective of that of the feedback controller. In this paper, we present a more general method to design an add-on type repetitive controller using the information on the performance of the existing feedback control system. We first show that a robust stability condition of repetitive control systems is obtained using the well-known robust performance condition of general feedback control systems. It is also shown that we can obtain a steady-state tracking error described in a simple form without time-delay element if the robust stability condition is satisfied for the repetitive control system. From the obtained results, several design criterions for repetitive controller are provided. Through the simulation study, the feasibility of the proposed method is verified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.325-331
• /
• 2006

This paper suggests the design methodology of a robust controller based on disturbance rejection controller using DSP. In this paper, we discuss process to put the disturbance rejection controller into practice, and examine the performance of disturbance rejection controller by implementing it on DSP based hardware to evaluate usefulness of controller. As a result, the proposed robust controller can not only stabilize system against disturbance ,but it improve controlling performance. And also, it shows convenient to put into practical use of industrial sites due to its easy implementation on the hardware.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.364-367
• /
• 1996

This paper deals with the design and evaluation of the robust controller for generator excitation system to improve the steady state and transient stabilities. The nonlinear characteristics of the system is treated as model uncertainties, and then the robust control techniques are introduced into the PSS design to take into account these uncertainties at the controller design stage. The performance of the designed controller is examined by extensive non-linear time domain simulation. It is shown that the performance of the robust controller is superior to that of the conventional PSS in all cases studied.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.420-425
• /
• 1996

In this paper a robust speed controller for an induction motor is proposed. The speed controller consists or a fuzzy sliding adaptive controller(FSAC) and a sliding mode torque observer(SMTO). FSAC removes the problem or oscillations caused by discontinuous inputs of the sliding mode controller. The controller also provides robust characteristics against parameter and sampling time variations. Although, however, the performance of FSAC is better than PI controller and fuzzy controller in robustness, it generates the problem of slow response time. To alleviate this problem, a compensator, which performs feedforward control using torque signals produced by SMTO, is added. The simulation and hardware implementation results show that the proposed system is robust to the load disturbance, parameter variations, and measurement noises.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.137-144
• /
• 2006

This paper proposes the design of a robust controller based on disturbance observer which is strong to variation of system parameters, uncertainty of models or external disturbance. The controller consists of a mode based compensator and a feedback controller based on two-loop structure. The compensator in the internal-loop removes internal and external disturbances and a feedback controller in the external loop achieves performance along with given specifications. As a result, it shows that the proposed robust controller can stabilize a system against disturbance and improve controlling performance.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2427-2433
• /
• 2015

This paper presents an observer-based robust controller for constant reference tracking of linear time invariant systems with polytopic model uncertainties. To this end, this paper not only designs a robust integral controller gain but also suggests how to determine the robust observer gain and the observer model used in the observer. Since the observer model selection is not obvious due to the polytopic uncertainties, particular attention needs to be paid to that. This paper computes the robust controller and observer gains first. Then, the observer model is selected in a way that the whole closedloop is stable and LMIs are used in the middle of choosing the gains and observer model. Simulation examples show that the proposed observer-based feedback control successfully achieves robust reference tracking.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.2
• /
• pp.74-80
• /
• 2003

In this paper, a robust two-degree-of-freedom(TDF) the speed control system using $H_{\infty}$ optimization method and real genetic algorithm is proposed for the robust stability and the robust performance in dc servo motor system. This control system composed of feedback and feedforward controller. The feedback(FB) controller with $H_{\infty}$ optimization method is designed for real genetic algorithm that is model matching problem using mixed sensitivity function. The feedforward(FF) controller with $H_{\infty}$optimization method is minimized the error between transfer function of the optimal model and the overall transfer function. The proposed robust two-degree-of-freedom speed control system is simulated to the dc servo motor. By the simulation, feedback controller can obtain the robust stability property and feedforward controller can obtain the robust performance property under modelling error. The performance of the dc servo motor is analyzed by the experiment setting. The validity of the proposed method is verified through being compared with pid(proportional integrated differential)control system design method for the dc servo motor.