• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.1065-1074
• /
• 2000

A robust nonlinear $H_2$/$H_{\infty}$ control method for a parallel inverted pendulum with structured perturbation and dry friction is proposed. By the random input describing function techniques, the nonlinear dry friction is approximated into the quasi-linear system. Introducing the quadratic robustness theorem, the robust $H_2$/$H_{\infty}$ control system is constructed for the quasi-linear perturbed system. But it is difficult to design a controller due to the nonlinear correction term in Riccati equation. With some transformations on the Riccati equation containing nonlinear correction term, the design of the robust nonlinear controller can be done easily. Hence when the stiffness and mass of the parallel inverted pendulum vary in certain ranges, the proposed control scheme has the robustness for both the structured perturbation and dry friction. The results of computer simulation show the effectiveness of our proposed control method.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.128-141
• /
• 1998

We propose the robust nonlinear controller design methodology for the multivariable system which has hard nonlinearities (Coulomb friction, dead-zone, etc) and the structured real parameter uncertainty. The hard nonlinearity can be linearized by the RIDF technique and structured real parameter uncertainty can be modelled as the sense of Peterson-Hollot's quadratic Lyapunov bound. For this system, we apply the robust QLQG/H$_{\infty}$ control and then can obtain four Riccati equations. Because of the system's nonlinearity, however, one Riccati equation contains the nonlinear correction term that is very difficult to solve numerically, In order to treat this problem, using some transformations to Riccati equations, the nonlinear correction term can be eliminated. Then, only two Riccati equations need to design a controller. Finally, the robust nonlinear controller is synthesized via IRIDF techniques. To test this proposed control method, we consider the direct-drive robot manipulator system that has Coulomb frictions and varying inertia.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.111-114
• /
• 1996

This paper proposes a robust control method using Universal Learning Network(U.L.N.) and second order derivatives of U.L.N.. Robust control considered here is defined as follows. Even if external input (equal to reference input in this paper) to the system at control stage changes awfully from that at learning stage, the system can be controlled so as to maintain a good performance. In order to realize such a robust control, a new term concerning the perturbation is added to a usual criterion function. And parameter variables are adjusted so as to minimize the above mentioned criterion function using the second order derivative of the criterion function with respect to the parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.108-111
• /
• 1999

In this paper, we develope a composite control law for linear systems with norm-bounded time-varying parameter uncertainties, which consists of a basic linear robust control do-signed so as to generate a desired transient time-response for the worst-case parameter variation and a nonlinear modification term designed so as to reduce cautiousness of the linear robust control in an adaptive manner. The proposed controller is established such that the reduction of cautiousness of the linear robust control is well incorporated into the achievement of a good transient behavior.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1254-1261
• /
• 2003

In this paper we present a simple and efficient robust optimal design formulation and its application to a resonant-type micro probe. The basic idea is to use the Gradient Index (GI) to improve robustness of the objective and constraint functions. In the robust optimal design procedure, a deterministic optimization for performance of MEMS structures is followed by design sensitivity analysis with respect to uncertainties such as fabrication errors and change of operating conditions. During the process of deterministic optimization and sensitivity analysis, dominant performance and uncertain variables are identified to define GI. The GI is incorporated as a term of objective and constraint functions in the robust optimal design formulation to make both performance and robustness improved. While most previous approaches for robust optimal design require statistical information on design variations, the proposed GI based method needs no such information and therefore is cost-efficient and easily applicable to early design stages. For the micro probe example, robust optimums are obtained to satisfy the targets for the measurement sensitivity and they are compared in terms of robustness and production yield with the deterministic optimums through the Monte Carlo simulation.

• 한국통신학회논문지
• /
• 제18권3호
• /
• pp.348-354
• /
• 1993

본 논문에서는 음성의 short-term 계수 추출에 대한 새로운 방식을 제안하였으며, 데이타량 9.6Kbits/sec의 멀티 트리 부호기를 실현하였다. 이 트리 부호기는 총 지연시간 2.5msec을 (6.4KHz 샘플링 주파수에서 16샘플) 가지며, 좋은 출력 음질을 가지며, bit 오욜 (BER) $10^{-3}$에서도 견실한 상태를 유지한다. 이 견실성은 short-term 계수 추출을 위해 수신된 여기 신호를 smoothing 하여, 병렬 구성과 함께 사용하므로 가능 하였다. 이 부호기의 출력 음성은 SNR, SNRSEG, 그리고 듣기 시험으로 평가 되었다.

• 한국음향학회지
• /
• 제20권6호
• /
• pp.26-33
• /
• 2001

기존의 AR HMM(auroreg ressive hidden morkov model)에 의한 화자인식 방법은 그 성능이 우수하나, 잡음에 대한 것이 고려되지 않아 실제 환경에 적용시 성능저하가 문제가 된다. 본 논문에서는 실제 환경에 맞추기 위하여 관측 신호 모델에서 잡음을 고려하고, 화자인식 성능을 개선하고자 지속시간항 (duration-term)을 포함하는 AR HMM을 이용하여 잡음환경에서의 강인한 화자인식 시스템을 제안한다. 100명의 화자 (남자 77명, 여자 23명)가 2주에 걸쳐 6번 발성한 숫자음 데이터베이스을 가지고, 백색잡음 및 자동차 잡음하에서 실험한 결과, 제안된 방법으로 성능이 향상됨을 확인하였다.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1234-1242
• /
• 2003

In this paper we present a simple and efficient robust optimal design formulation for MEMS structures and its application to a resonant-type micro probe. The basic idea is to use the gradient index (GI) to improve robustness of the objective and constraint functions. In the robust optimal design procedure, a deterministic optimization for performance of MEMS structures is followed by design sensitivity analysis with respect to uncertainties such as fabrication errors and change of operating conditions. During the process of deterministic optimization and sensitivity analysis, dominant performance and uncertain variables are identified to define GI. The GI is incorporated as a term of objective and constraint functions in the robust optimal design formulation to make both performance and robustness improved. While most previous approaches for robust optimal design require statistical information on design variations, the proposed GI based method needs no such information and therefore is cost-effective and easily applicable to early design stages. For the micro probe example, robust optimums are obtained to satisfy the targets for the measurement sensitivity and they are compared in terms of robustness and production yield with the deterministic optimums through the Monte Carlo simulation. This method, although shown for MEMS structures, may as well be easily applied to conventional mechanical structures where information on uncertainties is lacking but robustness is highly important.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.253-257
• /
• 2013

본 논문은 지연된 출력과 미지의 외란을 갖는 비선형 시스템에 대한 강인 관측기 설계방법을 제안한다. 지연된 출력의 존재에도 불구하고 관측기의 추정오차에 대한 외란의 효과를 원하는 수준까지 줄일 수 있음을 보인다. 강인 관측기의 존재조건은 시간 지연 값에 의존적인 선형행렬 부등식을 이용하여 제시한다. 마지막으로 제안한 결과의 유효성을 증명하기 위하여 수치 예제를 제공한다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권4호
• /
• pp.262-267
• /
• 2001

Jeha Ryu Department of Mechatronics, Kwangju Institute of Science and Technology This paper presents an application of a robust adaptive control strategy to HexaSlide type six degrees-of-freedom parallel manipulators. The HexaSlide type parallel manipulators are characterized as an architecture with constant link lengths that are attached to moving sliders on the ground and to a mobile platform. The proposed control law is developed based on a simplified second order system dynamic equation in joint space with uncertain mass, damper, spring, and Coulomb friction terms. These uncertain parameters are updated by an adaptation law that is derived by Lyapunov stability theorem. A robust adaptive control law by using the boundary layer is designed for the purpose of compensating for the neglected dynamic effects of the mobile platform and the six moving links that are modeled as a disturbance term. Experimental results show good and fast tracking performance.