• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.540-544
• /
• 2001

This paper addresses a hybrid control architecture for the hospital service robot, SmartHelper. In hybrid architecture, the deliberation takes place at planning layer while the reaction is dealt through the parallel execution of operations. Hence, the system presents both a hierarchical and an heterarchical decomposition, being able to show a predictable response while keeping rapid reactivity to the dynamic environment. The deliberative controller accomplishes four functions which are path generation, selection of navigation way, command and monitoring. The reactive controller uses fuzzy and potential field method for robot navigation. Through simulation under a virtual environment IGRIP, the effectiveness of the hybrid architecture is verified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.249-254
• /
• 2001

Abstract In this paper, we propose a method of cooperative control based on artifical intelligent system in distributed autonomous robotic system. In general, multi-agent behavior algorithm is simple and effective for small number of robots. And multi-robot behavior control is a simple reactive navigation strategy by combining repulsion from obstacles with attraction to a goal. However when the number of robot goes on increasing, this becomes difficult to be realized because multi-robot behavior algorithm provide on multiple constraints and goals in mobile robot navigation problems. As the solution of above problem, we propose an architecture of fuzzy system for each multi-robot speed control and fuzzy-neural network for obstacle avoidance. Here, we propose an architecture of fuzzy system for each multi-robot speed control and fuzzy-neural network for their direction to avoid obstacle. Our focus is on system of cooperative autonomous robots in environment with obstacle. For simulation, we divide experiment into two method. One method is motor schema-based formation control in previous and the other method is proposed by this paper. Simulation results are given in an obstacle environment and in an dynamic environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.92.5-92
• /
• 2002

$\textbullet$ Introduction to the concept of the Mobile Robot working mode(online and of offline mode) $\textbullet$ Introduction to the Issac Robot Specification $\textbullet$ Discussion on the technology selection $\textbullet$ Description of the system and software architecture $\textbullet$ System implementation result. $\textbullet$ Conclusion and future work

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.86-88
• /
• 2004

Personal Robot System in developing, have a module architecture, each module are connected through variety network system like ethernet, WLAN (802.11), IEEE 1394 (firewire), bluetooth, CAN, or RS-232C. In developing personal robot system. We think that the key of robot performance is interoperablity among modules. Each network protocol are well connected in the view of network system for the interoperability. So we make a bridging architecture that can routing converting, and transporting packets with matching each network's properties. Furthermore, we suggest a advanced design scheme for realtime / non-realtime and control signal (short, requiring hard-realtime) / multimedia data (large, requiring soft-realtime).

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.3
• /
• pp.270-274
• /
• 2002

This paper presents a teleoperation system that combines computer network and an autonomous mobile robot. We control remotely an autonomous mobile robot with vision over the Internet to guide it under unknown environments in the real time. The main feature of this system is that local operators need a web browser and a computer connected to the communication network and so they can command the robot in a remote location through the home page. The hardware architecture of this system consists of an autonomous mobile robot, workstation, and local computers. The software architecture of this system includes the client part for the user interface and robot control as well as the server part for communication between users and robot. The server and client systems are developed using Java language which is suitable to internet application and supports multi-platform. Furthermore. this system offers an image compression method using JPEG concept which reduces large time delay that occurs in network during image transmission.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.620-626
• /
• 2019

With the development of robot technology, the expectation of autonomous mission operations has increased, and the research on robot control architectures and mission planners has continued. A scalable and robust control architecture is required for unmanned surface vehicles (USVs) to perform a variety of tasks, such as surveillance, reconnaissance, and search and rescue operations, in unstructured and time-varying maritime environments. In this paper, we propose a robot control architecture along with a new utility function that can be extended to various applications for USVs. Also, an additional structure is proposed to reflect the operator's command and improve the performance of the autonomous mission. The proposed architecture was developed using a robot operating system (ROS), and the performance and feasibility of the architecture were verified through simulations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.127-132
• /
• 1992

To relize the future intelligent robot the development of a special-purpose processor for a coordinate transformation is evidently challenging task. In this case the complexity of a hardware architecture strongly depends on the adopted algorithm. In this paper we have used an inverse kinemetics algorithm based on incremental unit computation method. This method considers the 3-axis articulated robot as the combination of two types of a 2-axis robot: polar robot and 2-axis planar articulated one. For each robot incremental units in the joint and Cartesian spaces are defined. With this approach the calculation of the inverse Jacobian matrix can be realized through a simple combinational logic gate. Futhermore, the incremental computation of the DDA integrator can be used to solve the direct kinematics. We have also designed a hardware architecture to implement the proposed algorithm. The architecture consists of serveral simple unitsl. The operative unit comprises several basic operators and simple data path with a small bit-length. The hardware architecture is realized byusing the EPLD. For the straight-line motion of the KAIST arm we have obtained maximum end effector's speed of 12.6 m/sec by adopting system clock of 8 MHz.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.820-824
• /
• 2004

Personal Robot System in developing, have a module architecture, each module are connected through heterogeneors network systems like Ethernet, WLAN (802.11), IEEE1394 (Firewire), Bluetooth, USB, CAN, or RS-232C. In developing personal robot system we think that the key of robot performance is interoperability among modules. Each network protocol are well connected in the view of network system for the interoperability. So we make a bridging architecture that can routing, converting, transporting data packets with matcing each network's properties. Furthermore we suggest a advanced design scheme for realtime / non-realtime and control signal (short, requiring hard-realtime) / multimedia data (large, requiring soft-realtime). By some application systems, we could test performance, interoperability and stability. In this paper, we show our design concept, middleware architecture, and some applications systems using this middleware.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1396-1399
• /
• 1996

With the progress in process automation, it becomes necessary that a robot should have various sophisticated capabilities. A robot programming language is a tool that can give a robot such capabilities without any change in robot architecture. Especially a task level automatic programming system enables a robot able to perform a job intelligently. Therefore anyone who is not an expert on welding or robot programming can easily use it. In this research, basic automatic welding program is combined with workspace information, which makes users do an arc welding job automatically.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.397-402
• /
• 2005

In this paper, to improve the efficiency of welding and user convenience in the shipbuilding industry, a PC-based off-line programming (OLP) technique and the development of a robot transfer unit are presented. The developed OLP system is capable of not only robot motion simulations but also automatic generations of a series of robot programs. The strength of the developed OLP system lies in its flexibility in handling the changes of the welding robot's target objects. Moreover, for a precise transfer of the robot to a desired location, an auxiliary mobile platform named a robot-origin-transfer-unit (ROTU) was developed. To enhance the cornering capability of the platform in a narrow area, the developed ROTU is equipped with 2 steering wheels and 1 driving wheel. Both the OLP and the ROTU were field-tested and their performances were proven successful.