• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.404-405
• /
• 2012

The research of the biological mimics robot which utilizes the operation of the organism and which it applies to the robot is progressed on the ground, aerial, and underwater robot sector. In the field of flying robot, the research for implementing the wing movement structure of the bird and insect is progressed. The joint structure for the wing movement of the bird is implemented. The operation of the wing is simulated. For this purpose, by using the Matlab/Simulink, the joint structure of the wing is modelled. The joint movement of the wing is tested through the simulation.

• International Journal of Control, Automation, and Systems
• /
• 제6권4호
• /
• pp.551-558
• /
• 2008

This paper deals with the real-time stable walking for a humanoid robot, ISHURO-II, on uneven terrain. A humanoid robot necessitates achieving posture stabilization since it has basic problems such as structural instability. In this paper, a stabilization algorithm is proposed using the ground reaction forces, which are measured using FSR (Force Sensing Resistor) sensors during walking, and the ground conditions are estimated from these data. From this information the robot selects the proper motion pattern and overcomes ground irregularities effectively. In order to generate the proper reaction under the various ground situations, a fuzzy algorithm is applied in finding the proper angle of the joint. The performance of the proposed algorithm is verified by simulation and walking experiments on a 24-DOFs humanoid robot, ISHURO-II.

• 로봇학회논문지
• /
• 제13권2호
• /
• pp.86-91
• /
• 2018

This paper presents about design efforts of a human-sized quadruped robot leg for high energy efficiency, and verifications. One of the representative index of the energy efficiency is the Cost of Transport (COT), but increased in the energy or work done is not calculated in COT. In this reason, the input to the output energy efficiency should be also considered as a very important term. By designing the robot with customized motor housing, small rotational inertia, and low gear ratio to reduce friction, high energy efficiency was achieved. Squatting motion of one leg was performed and simulation results were compared to the experimental results for validation. The developed 50 kg robot can lift the weight up to 200 kg, and during squatting, it showed high energy efficiency. The robot showed 71% input to output energy efficiency in positive work. Peak current during squatting only appears to be 0.3 A.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.586-591
• /
• 2015

This paper proposes a force feedback system of telepresence robot for remote operation. The ultrasonic sensors attached at the robot detect the obstacles, and generate the force to the operation joystick. In order to consider the network delay, we developed the fuzzy control system using ultrasonic data and robot speed. The method to calculate the force vector from the ultrasonic data is also presented to operate the robot more accurately. The simulation and experimental results are presented to verify the safe and accurate operation of the proposed system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권3호
• /
• pp.246-252
• /
• 2005

Intelligent Space is a space where many sensors and intelligent devices are distributed. Mobile robots exist in this space as physical agents, which provide human with services. To realize this, human and mobile robots have to approach each other as much as possible. Moreover, it is necessary for them to perform interactions naturally. It is desirable for a mobile robot to carry out human affinitive movement. In this research, a mobile robot is controlled by the Intelligent Space through its resources. The mobile robot is controlled to follow walking human as stably and precisely as possible. In order to follow a human, control law is derived from the assumption that a human and a mobile robot are connected with a virtual spring model. Input velocity to a mobile robot is generated on the basis of the elastic force from the virtual spring in this model. And its performance is verified by the computer simulation and the experiment.

• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.33-38
• /
• 2012

The wafer positioning robot in the semiconductor industry is required to operate at high speed for the improvement of productivity. The residual vibration caused by the high speed of the wafer positioning robot, however, makes the life of the robot shorter and the cycle time longer. In this study, the input shaping and the path of the system are designed for the reduction of the residual vibration and the improvement of the cycle time. The followings are the process for the reduction and the improvement; 1) System modeling of the wafer positioning robot, 2) Verification of dynamic characteristics of the wafer positioning robot, 3) Input shaping plan using impulse response reiteration, 4) Simulation test using SIMULINK program, 5) Analysis of result.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.163-173
• /
• 2010

In multi-mobile robot environment, path planning and collision avoidance are important issue to perform a given task collaboratively and cooperatively. The proposed approach is based on a potential field method and fuzzy logic system. For a global path planner, potential field method is employed to select proper path of a corresponding robot and fuzzy logic system is utilized to avoid collisions with static or dynamic obstacles around the robot. This process is continued until the corresponding target of each robot is reached. To test this method, several simulation-based experimental results are given. The results show that the path planning and collision avoidance strategies are effective and useful for multi-mobile robot systems.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.108-114
• /
• 2014

This paper proposes a generation method of a navigation guidance direction and a fuzzy controller to achieve the autonomous navigation of a mobile robot using a particle swarm optimization(PSO) scheme in unknown environments. The proposed navigation guidance direction is the direction that leads a mobile robot to arrive a target point simultaneously with avoiding obstacles efficiently according to the surrounding local informations. It is generated by selecting the most suitable direction of the many directions in the surrounding environment using a particle swarm optimization scheme. Also, a robot can reach a target point with avoiding the various obstacles by controlling the robot so that it can move from its current orientation to the navigation guidance direction using the proposed fuzzy controller. Simulation results are presented to show the feasibility and validity of the proposed robot navigation scheme.

• 한국전자통신학회논문지
• /
• 제8권3호
• /
• pp.421-432
• /
• 2013

본 논문은 이동 로봇의 자율 주행을 위한 중요한 기술 중 하나인 위치 추정을 위한 함수 구현에 관해 서술되었다. 기존의 로봇 자율주행용 함수 라이브러리 중 일부는 모의실험에만 사용할 수 있기 때문에 실제 적용에 제한이 따른다. 본 논문은 실내 이동 로봇의 위치 추정을 위해 사용할 수 있는 함수의 개발에 중점을 두었다. 함수들은 추측항법, 이동 로봇의 운동 모델, 거리 측정 센서의 측정 모델, 그리고 빈번히 사용되는 방향 관련 연산에 대해 구현되었다. 구현된 함수들은 다양한 로봇과 센서에 적용할 수 있다. 사용자는 적절한 함수를 선택하여 로봇 운동과 센서 측정 불확실성의 다양한 유형을 구현할 수 있다. 구현된 함수들은 모의실험과 실제 실험을 통해 시험 및 증명되었다.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.28-34
• /
• 2016

When a electric power cable is installed in the air for newly or exchanged working, it is necessary at all time to hold a constant tension for an overhead power cable. And also a pendanted power cable is an extreme job to have work in a high sky. For this reason, the objective of this paper developments working robot for preventing disaster that tension of cable installed automatically power cable to hold a constant. So the working robot works at all the time two tasks for mobil and tension it come into a inference between two tasks, control is difficult. Control methode needs to suppress inference of two tasks. In this paper, for installation of overhead power cable, the scheme and control methode of working robot is presented. the robot work at a same time tow tasks that have hold a constant tension of the power cable and move a constant place while unfasten a winding cable at a drum on a chassis. Working robot consist of three parts with mobile system, tension system and control part. As it is applied the feedback/feedforward control, methode of hybrid control is established to suppress that interference come into between two tasks. The simulation programs is made out using models of mobil and tension system, and a proposed controllers. In accordance with simulation, the model of each systems is discussed to make out proper. And also parameters of controllers is selected a suitable value and the driving performance of robot is evaluated.